### What was the issue?
The check that validates whether a filament is compatible with the selected build plate type was only executed for Bambu Lab printers.
Other printers skipped this entirely, even though they can also use multiple plate types with different temperature requirements.
This caused cases where:
- incompatible filament/plate combinations went unnoticed,
- users received no warning even when the bed type clearly couldn’t support the selected filament.
### What’s changed?
- The validation block extends beyond BambuLab printers.
- Now all printers get the same compatibility check:
- if a filament requires a bed temperature not supported by the chosen plate,
- Orca shows the same clear error message as it does for BBL printers.
- Show the selected filament preset name (alias if present) in bed/filament mismatch warnings instead of substituting the parent preset.
### Why this helps
- Consistent behavior across all printer brands.
- Prevents invalid filament/plate setups that could cause print failures.
- Makes plate presets more robust and predictable for custom and community printers.
### Notes
- No behavior changes for BBL printers — they keep the existing checks.
- Other printers now benefit from them too.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Merge branch 'main' into main
* Merge branch 'SoftFever:main' into main
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* Merge branch 'SoftFever:main' into main
* Merge branch 'SoftFever:main' into main
* change machine_gcode
* Merge branch 'main' of https://github.com/HYzd766/OrcaSlicer
* Merge branch 'SoftFever:main' into main
* Multi-color code compatible with QIDI models
* Merge branch 'main' into main
* toggle axis visibility on canvas (#9666)
* toggle axis visibility on canvas
* set show_axes config on toggle
* fix: Add pause and filament change to machine gcodes for Sovol SV08 MAX (#11214)
* Add fixed Ironing Angle setting for uniform surface finish (#11195)
* Initial working fixed ironing angle implemented with new Fixed ironing angle setting
* update documentation
* Combine Fill.is_using_template_angle and Fill.alternate_fill_direction into Fill.fixed_angle
* Rename SurfaceFillParams.is_using_template_angle to SurfaceFillParam.fixed_angle.
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
The translated strings cannot match the correct config, delete the translation of these two opt_key
jira: STUDIO-13989, STUDIO-13988
Change-Id: I5e8ebf342b5bb18c1ca6a88a3916197941c0cb03
(cherry picked from commit a84d9ab466b1f6b1ccb727d4f34cdb7c2eb8e30a)
Added option information to the error prompt to facilitate users to jump to the corresponding option
jira: none
Change-Id: I3f13acac08a1e84625dc22363822989f1eab7ec7
(cherry picked from commit 96b4e6610fa532b74247abe925d8c8d19869bf93)
Add warning about enable_wrapping_detection without prime tower. Note: Only one of this warning, check_multi_filament_valid, and support_enforcer without support can be displayed at the same time.
jira: none
Change-Id: Ic8f0fc7ab62b63af1604e32b7380642741669462
(cherry picked from commit 698c0d16c99e13244101c06d7a3a8ff66ae2e4d0)
Because the function in print.cpp mistakenly considers models with different variable layer height configurations to be the same, the layer height configurations of the copied objects are optimized and overwritten. Fixed function: auto is_print_object_the_same = [this](const PrintObject* object1, const PrintObject* object2)
jira: STUDIO-13507
Change-Id: Ic4b3a479e8984b46a2f9557f65826951b8979646
(cherry picked from commit 2d5137914e9699c4fe9ddbbc76f13b85dbc3a1a9)
In print.cpp, logic was added to skip checking for mixed prints when using the byobject mode. This prevented false positives for single-filament objects, but it also failed to detect mixed prints. This detection has been restored, but separate logic for byobject mode has been added to the detection function: StringObjectException Print::check_multi_filament_valid(const Print& print). This will only prompt a warning when a single object contains high- and low-temperature filaments.
jira: STUDIO-13667
Change-Id: I37622e49b76581ea4a2d78c97ebcd655bb7199e6
(cherry picked from commit 7128758056f1fe11bdd953e7f3d91284b15535a9)
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
