Commit graph

1019 commits

Author SHA1 Message Date
Arthur
30bb96aa47 FIX: spiral mode couldn't be enabled
Support layers should be released in is_support_necessary.

Jira: STUDIO-2120
Change-Id: Id1c6fa2d8635e55be745095408dfbac38a25efa6
(cherry picked from commit f911e8d084c4fa273f8c9211112fa2f83515cfb1)
2023-02-01 16:24:44 +08:00
salt.wei
431eabd464 ENH: use gcode processer to get precise layer number
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.

Check the final layer change in final gcode file.
This must be same with total layer number.

Jira: Studio-2123

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
2023-02-01 16:24:44 +08:00
salt.wei
7dcb5c0e64 ENH: layer height 5.99999 should be same with 6.0
Merge numerically very close Z values when calculate
total layer number

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I4e60ca69fe5b06b66283d6a763d0b231c3d11b5a
2023-02-01 16:24:44 +08:00
Stone Li
b1fbdaf61c NEW: pass design info to PrintJob
Change-Id: Ic24462324b389e20647620366a5fe2b53bb4c1ce
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-02-01 16:24:44 +08:00
yifan.wu
d833ab1546 ENH: remove redundant log
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Id18e366e05ca49740b781ccb5e5f88af61debf56
(cherry picked from commit 269e617faa20f47b2e27e9c24376c7c9c04e0cd0)
2023-02-01 16:24:44 +08:00
salt.wei
170a24a43f ENH: show travel time in gcode viewer
Seperate travel time from extrusion role time and
show it seperately.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
2023-02-01 16:24:44 +08:00
qing.zhang
db873eb99b ENH: inner-out-inner wal seq
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Idd2205f2b72a8f471927c9e3a38415013548f09e
2023-02-01 16:24:44 +08:00
zhimin.zeng
1015b7bca9 ENH: enhance the travel path of change filament
Change-Id: I720b833fc203f7ece63487e00290f4d91423c9f9
(cherry picked from commit 55e5fd8df1576d2b9252b2bd9e3e494db76218bf)
2023-02-01 16:24:44 +08:00
zhimin.zeng
a52e423416 FIX: crush when slicer multi-color model
the root cause is a mismatch between the dimensions of flush matrix and the number of extruders

Change-Id: I3a4ca706cb24d9e5d33969b9e6f5b288e71bb8f2
(cherry picked from commit 7399037eaacdfd7d8407667a2e5a097757265254)
2023-02-01 16:24:44 +08:00
salt.wei
9828101fa8 ENH: total layer number is wrong when enable support
This is fix for jira 2061

Layer height is double and may has small difference, which
influence total layer number when support is enabled.

Should use int data and consider EPSION when calculate total
layer number.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1bb6c89f2afd162d2d7e7dcff4a9d6a00b94dab3
2023-02-01 16:24:44 +08:00
四季奶青七分甜
b7b9029548 fix: Revert "ENH: avoid overhang area when set the seam position"
This reverts commit 1e95803df3733021e80241ecf7b88976708f0cf7.

Reason for revert: some model test not good, need to update curve function

Change-Id: I6afd6115d21198f60453d4f507905b6684a65cff
2023-02-01 16:24:44 +08:00
salt.wei
4a3a4645f0 ENH: fix issue that sommetimes no wipe path is generated
This is handling for github issue #1072

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I253be46b07054eb69ddbad3889e31dfca57b2a52
2023-02-01 16:24:44 +08:00
qing.zhang
c56d0d8041 ENH:limit max nozzle diameter
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id87a83f1ad5d6d0033bd25eb456dd1204320ae80
2023-02-01 16:24:44 +08:00
Arthur
81ee7bb99b ENH: improve is_support_necessary
Use tree support to detect if there are sharp tails and so on.

Jira: STUDIO-1898

Change-Id: I148e14ca4024849875133a646a8fdd36c265b2fb
(cherry picked from commit bc74015d45e96e409d34d611876e3a24e289e029)
2023-02-01 16:24:44 +08:00
salt.wei
43ba4b0712 ENH: fix the issue about forcing cooling of pa-cf
For pa-cf, the default setting of cooling is
forcing cooling for all outer wall.

And internal tester found that the slowing down by
layer time does not work for outer wall under
this situation.

This is fix for this issue.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05aaa16d246f5ea6dc1ae9808050e1281646e184
2023-02-01 16:24:44 +08:00
Arthur
5cc08e3398 FIX: tree support first layer defects
Tree support didn't fill the first layer when the tree is too short

udesk: 0284
Change-Id: I2702b26733e7360445e19847abb48f75f173da4e
(cherry picked from commit e317f9e19fbbfe21efb495e23a8ff78661bfee79)
2023-02-01 16:24:44 +08:00
Arthur
fa9a530184 FIX: raft density in tree support was wrong
Jira: STUDIO-2005
Change-Id: Ic2e9a3824ea943f101737270382c63cfaea656a1
(cherry picked from commit e10e17863a40638329ff43c8fa12b88c79e7b76b)
2023-02-01 16:24:44 +08:00
Heiko Liebscher
8244693b55
Fix po and pot file (#258)
* fix typo and tooltip

* merge pot po german

* fix more

* merge with bambu master pot

* fix po to Softfever

* fix

* build new Softfever pot mege with xx.po

* enable hints in german again
2023-01-31 22:34:49 +08:00
SoftFever
9b3ed8e4e6 fix crashes when switch timelapse and vase mode
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-28 16:14:15 +08:00
SoftFever
5209719777 fix po file erros
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-27 00:11:21 +08:00
SoftFever
86f367b1f6 misc changes
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-26 23:11:21 +08:00
SoftFever
031a027717 Port seam fix for Arachne from PrusaSlicer
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-26 01:43:23 +08:00
SoftFever
854470cfba wipe on loops
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-26 01:29:44 +08:00
SoftFever
0c2309e3a2
PA Calib dialog (#232)
* fix colors

Signed-off-by: SoftFever <softfeverever@gmail.com>

* calib dlg
WIP 1/2

Signed-off-by: SoftFever <softfeverever@gmail.com>

* cut tower based on range

Signed-off-by: SoftFever <softfeverever@gmail.com>

* mac menu change

Signed-off-by: SoftFever <softfeverever@gmail.com>

* minor fix

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>

Signed-off-by: SoftFever <softfeverever@gmail.com>
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-26 01:28:47 +08:00
Patrice Côté
2a757b1b95
Compatibility with klipper_estimator (#229)
Changed estimated time string in order to be fully compatible with klipper_estimator. Format is now the same as Slic3r, PrusaSlicer and SuperSlicer
2023-01-25 21:58:59 +08:00
Patrice Côté
bf782028ac
Option for klipper only: Adjustment of "accel_to_decel" (#220)
* Klipper option: Adjustment of "accel_to_decel"

Add option to automatically adjust accel_to_decel to 50% of chosen acceleration.

* allow variable accel_to_decel percentage

allow variable accel_to_decel percentage for klipper firmware
2023-01-24 21:33:34 +08:00
SoftFever
cdd9c51949
Feature/fix timelapse crash (#224)
* Move use_firmware_retraction out of extruder tab

Signed-off-by: SoftFever <softfeverever@gmail.com>

* fix timelapse crash

Signed-off-by: SoftFever <softfeverever@gmail.com>

Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-24 20:36:05 +08:00
Vladimir
ba72d1731b
Force using of monotonic infill pattern for internal solid infill. (#218)
* Force using of monotonic infill pattern for internal solid infill to get rid of redundant gap fills.

* Fix an issue "Patterntype for Solid and top layer #134"
2023-01-24 13:07:52 +08:00
Patrice Côté
5692e02c54
Enable absolute/relative extrusion option on non BBL printers (#205)
Add the option to use non-relative extrusion in printer config screen. Some extruders do not play well with relative extrusion...

Remove reference to multi-extruder

Remove reference to multi-extruder

change g-code comment for M83 relative extrusion

changed comment for M83

Remove commented line of code

In this specific case, we delete the old line of code because it refers to a variable that was deleted from the rest of the code (RELATIVE_E_AXIS)
2023-01-24 13:02:52 +08:00
SoftFever
594c22cde0 fix wrong print size in case of multi plate
Signed-off-by: SoftFever <softfeverever@gmail.com>
#153
#37
2023-01-22 23:10:31 +08:00
SoftFever
3970b84d97 remove bed temp 0 error for non-bambu printers
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-22 23:04:25 +08:00
SoftFever
b7bdb65fd3 Add option to set jerk for infills
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-22 22:05:19 +08:00
SoftFever
05c8b57ade Inner brim only and Outer and inner brim
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-22 01:30:35 +08:00
SoftFever
2492e5d39c merge upstream changes
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-21 00:37:10 +08:00
SoftFever
1bdedb1c47
Feature/fix more colors (#193)
* fix more colors

* fix more color on Mac

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>

* fix new windows issue on Mac

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
#137

* Support more PrusaSlicer variables

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>

* enhance compatibility: bed_shape and wipe_start_x

* fix more color

* build deps

* only build for PR

Signed-off-by: SoftFever <softfeverever@gmail.com>

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-01-18 23:06:39 +08:00
SoftFever
f9200cc7e4 Raised bed temperature limit to 300.
The actual temperature is subject to the firmware's limitations

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-16 21:13:13 +08:00
SoftFever
a6f0bd4d28 Allow 100% retract before wipe
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-16 20:59:10 +08:00
SoftFever
0ea985f926 move inwards before travel
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-16 00:58:01 +08:00
SoftFever
8350895513 role_based_wipe_speed and wipe_speed
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
2023-01-15 21:05:35 +08:00
SoftFever
023f8514c3 update tooltip 2023-01-14 19:43:35 +08:00
SoftFever
594819ef9c seam gap parameter 2023-01-14 19:39:00 +08:00
salt.wei
b107990270 ENH: disable clipper2 in perimeter generator
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.

Return to clipper1.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
2023-01-13 21:51:17 +08:00
Patrice Côté
540aa13e25
Add Post-processing (#159)
It is now possible to call external  post-process scripts
2023-01-12 19:42:31 +08:00
salt.wei
70a0f09ea2 ENH: disable clipper2 in perimeter generator
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.

Return to clipper1.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
2023-01-10 19:08:26 +08:00
salt.wei
ba064d44a1 fix: revert "ENH: aligned the z-seam"
This reverts commit 2d0805d4aabbc4e8f25aa93c8f01870c256a0b17.
2023-01-10 19:08:26 +08:00
salt.wei
b13928b615 fix: revert "FIX: fix the out range of array of seam algining"
This reverts commit f100c10fa8aa0460d3ff11723c6a2504b6b69bba.

Change-Id: Ice36f6f41d5a50a7244d8f09960876d9539802d8
2023-01-10 19:08:26 +08:00
qing.zhang
d42d6bec87 FIX: fix the out range of array of seam algining
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I655e7a0a5cdac6c05ddd8a6c7f38e1f97a7d0f96
2023-01-10 19:08:26 +08:00
chunmao.guo
ae959b7400 ENH: [STUDIO-1871] merge changes of user presets from other sessions
Change-Id: I2841ff4e23b18ebe7cdf374b69a494a4c05a49ee
2023-01-10 19:08:26 +08:00
chunmao.guo
a4cf284c3d ENH: adjust user preset handling
1. async fetch user presets from server (in thread)
2. always load default user presets
3. load user presets from cache immediately
4. not remove user presets cache
5. hide some loading ui

Change-Id: I1d29ed18e09606d0b2f69a69eea2eb5042c26223
2023-01-10 19:08:26 +08:00
qing.zhang
ad6257ca84 ENH: aligned the z-seam
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I60e1a046fb236d588a5e83b602fabd39580228fb
2023-01-10 19:08:26 +08:00