Lukas Matena
a380053a17
Merge branch 'lm_gizmos' into lm_fdm_supports_gizmo
2020-04-07 17:16:48 +02:00
bubnikv
c27297f6cc
64bit coord_t
...
Vec3i as a vertex index to TriangleMesh constructor
2020-03-25 14:35:41 +01:00
Lukas Matena
08daddb5de
WIP: First working implementation of the triangle selector for the FDM support gizmo
2020-03-19 11:15:17 +01:00
Lukas Matena
6918f11100
Removed SLA unused code
...
Mostly the dead-ends that were tried when hollowing was being implemented
2020-03-03 15:53:26 +01:00
tamasmeszaros
e3a583292a
Promote max_bridges_on_pillar to be a runtime parameter.
...
This way the user greater control over support tree branching and the amount of pillars created.
2020-03-02 12:43:00 +01:00
bubnikv
4e11552da9
Spiral vase improvements and bugfixes.
...
Fixes Connecting / expanding Bottom Layers to Vase Perimeter #253
Fixes Slicing error in vase mode #452
Fixes Slicing Issue (Vase Mode, 0.6mm dmr nozzle) #1887
Fixes Top fill pattern isn't used in spiral vase mode #2533
Fixes Cisar's vase doesn't slice correctly, creates artefacts #3595
When the model is sliced, all the contours are newly oriented
counter-clockwise (even holes), merged and then only the largest area
contour is retained. In perimeter generator, if the largest contour
splits into multiple perimeters, newly only the largest area perimeter
is retained in spiral vase mode. These two changes solve #3595 and similar.
The infill is newly calculated only for the bottom solid layers
if the spiral vase mode is active (removes various unwanted infill
along the vase walls), and the last bottom solid layer is switched
to a top solid pattern (solves #2533 ).
The thin walls are newly enforced to be disabled in spiral vase mode,
and the "ensure vertical shell wall" is enforced in spiral vase mode
to extend the bottom of the vase to the vase hull (fixes #253 ).
2020-02-08 21:36:43 +01:00
Lukas Matena
665bc9e960
Hollowing: allow to place drain holes on the inner surface of a hollowed cavity
...
Drain holes are not allowed to be placed on its own inner surface. This was recently (0e3ebb3
2020-02-06 17:58:26 +01:00
tamasmeszaros
848fe4750f
Add prusaslicer.ini to sl1 output zip
2020-01-24 15:23:59 +01:00
tamasmeszaros
743a03a8c2
append full config to sla zipped ini
...
SPE-1081
2020-01-24 14:31:31 +01:00
tamasmeszaros
7591637c89
Bugfixes and refactoring for SLA backend
...
remove duplicate code
Mark conversion constructors of EigenMesh3D `explicit`
Working on mesh simplification for hollowed interior
Fix bug SPE-1074: crash with empty supports and disabled pad.
fix regression after refactor
Remove unfinished code
Fix missing includes and dumb comments
2020-01-24 14:26:19 +01:00
tamasmeszaros
6b0af43665
Use mesh boolean in the backend to drill holes.
2020-01-24 10:53:40 +01:00
tamasmeszaros
f8a5796ca5
add mesh simplification.
...
SPE-1072
Working but flipped normals with the interior.
Testing on treefrog passed
Oversampling for hollowed mesh should not be less than 3x
Flip back normals after simplify and remove redundant test code.
2020-01-23 10:58:18 +01:00
Lukas Matena
d8f2c8cdab
Fixed a bug in the hole-aware raycaster
2020-01-17 16:02:23 +01:00
tamasmeszaros
e6bdec4aa5
Remove wrapper around std::mt19937
2020-01-15 17:44:15 +01:00
tamasmeszaros
e6244f7bdb
Eliminate use of uninitialized variable.
2020-01-14 10:48:22 +01:00
tamasmeszaros
ce49f0a294
Test sla support point generation determinism with seed parameter
2020-01-14 10:48:22 +01:00
tamasmeszaros
6205524d75
Make support point generator deterministic.
2020-01-14 10:48:22 +01:00
tamasmeszaros
90fbbf401f
Refactor model facing support generation.
...
Fix for touching junction when adding aux pillars.
Fix issue with overly long support bridges.
2020-01-14 10:48:22 +01:00
tamasmeszaros
45220e26c0
Fix zero elevation support maneuvers and comment to clarify the alg.
2020-01-14 10:48:22 +01:00
Lukas Matena
f22961edae
Fixed a raycaster problem with handling duplicate hits from igl
...
The duplicate hits confused winding number calculations in the raycaster, which in turn returned incorrect hit.
2020-01-09 14:09:26 +01:00
tamasmeszaros
578fcbc37c
Performance improvements in raycaster
2020-01-08 17:12:06 +01:00
tamasmeszaros
bb62f36df3
Add tests for EigenMesh3D raycaster with hole support.
...
Tests fail! Supports are intersecting the object when holes are added.
2020-01-08 17:11:22 +01:00
Lukas Matena
b3f15b1c98
Merge branch 'master' into lm_tm_hollowing
2019-12-20 10:33:53 +01:00
tamasmeszaros
42ffc4e3c5
Fix polytree traversal.
...
Put back old traverse_pt and union_pt_chained
2019-12-19 11:27:19 +01:00
tamasmeszaros
2feb8421e9
Divide pad blueprint before its filtered.
...
Filtering may remove the outer pad and the division expects an outer part to be present.
2019-12-19 10:59:21 +01:00
tamasmeszaros
66759e10e3
Add opencsg demo sandbox
2019-12-16 11:13:20 +01:00
Lukas Matena
73af7c64b8
SLATreeSupports generator now takes account for holes and can build supports through them
2019-11-29 10:19:02 +01:00
Lukas Matena
c6e112a060
Merge branch 'lm_tm_hollowing' into lm_hollow_gizmo
2019-11-22 12:04:54 +01:00
Lukas Matena
2c1d256b0c
EigenMesh3D raycaster should now be able to pick a correct intersection on the object or inside a hole
2019-11-22 11:14:38 +01:00
Lukas Matena
9dd18a8d6d
Started work on extending EigenMesh3D to account for possible drain holes when raycasting
2019-11-19 11:33:49 +01:00
tamasmeszaros
7011c58faa
Merge branch 'master' into lm_tm_hollowing
2019-11-18 17:50:56 +01:00
tamasmeszaros
673549d608
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
2019-11-13 16:07:40 +01:00
tamasmeszaros
d4d037792d
Holes are now visible on slices in preview.
2019-11-13 15:55:37 +01:00
tamasmeszaros
4e067c42f0
SLAPrint steps moved to separate module.
...
* Lambdas replaced with class methods
2019-11-12 16:54:59 +01:00
tamasmeszaros
a69e80b987
Fix non thread-safe data flow between plater and hollowing gizmo.
2019-11-11 17:27:32 +01:00
tamasmeszaros
c22423a219
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
...
* Refactor file names in SLA dir
2019-11-11 12:55:22 +01:00
Lukas Matena
b4795e1292
Unified igl calls in MeshRaycaster and EigenMesh3D
...
MeshRaycaster is still aware of the clipping plane but it now uses EigenMesh3D internally
Public interface of both classes is unchanged
2019-11-08 20:18:14 +01:00
tamasmeszaros
ac8eab5fa8
Enhanced hollowing scheme, closing distance working as expected.
2019-11-08 16:51:43 +01:00
Lukas Matena
645f13a0ae
Drain holes are now saved in ModelObject
...
Internal changes in GLGizmoHollow.cpp
2019-11-08 14:05:56 +01:00
tamasmeszaros
4b08865809
hollowing params renamed, filtering generalized
2019-11-08 09:21:30 +01:00
tamasmeszaros
07fb9f6559
Add oversampling and gaussian filter to hollowing.
...
* Additional steps hollowing and drilling in SPAPrint
* Remove SLABoilerPlate.hpp as it was empty.
2019-11-05 14:48:00 +01:00
tamasmeszaros
7808d09d06
SLA Contour3D expanded with conversions supporting quads.
2019-11-04 14:33:29 +01:00
tamasmeszaros
2165537fa5
Do some hollowing finally.
2019-10-31 14:36:33 +01:00
tamasmeszaros
77c52b748c
Zipper made available for modification after RasterWriter finishes.
2019-10-23 17:32:17 +02:00
Enrico Turri
16fd2820db
ENABLE_THUMBNAIL_GENERATOR -> WIP: Added missing include and preparation for adding thumbnail to exported sla archive files
2019-10-23 16:01:23 +02:00
tamasmeszaros
175b6fd9f5
Fix concave hull having holes.
2019-10-09 14:59:09 +02:00
tamasmeszaros
5bf3d5aabf
Merge branch 'tm_sla_tests'
2019-10-04 18:34:08 +02:00
tamasmeszaros
1df1ef481d
Port sla tests to catch2
2019-10-04 14:47:02 +02:00
tamasmeszaros
2edd5abf06
Fix endless loop in pinhead creation.
...
* Headless stick penetration value from global cfg
* eliminate warnings
2019-10-03 17:18:03 +02:00
tamasmeszaros
fefde79c89
Make sure no vector reallocation will be performed on pillars.
...
This is a workaround for now, it needs to be handled properly.
2019-10-03 15:13:17 +02:00
