to "compatible_printers_condition_cummulative" and "inherits_cummulative"
when storing to AMF/3MF/Config files.
Improved escaping of strings stored / loaded from config files.
and "inherits" fields from / to the AMF/3MF/Config files.
The "compatible_printers_condition" are collected over all active profiles
(one print, possibly multiple filament, and one printer profile)
into a single vector.
(the MachineEnvelopeConfig class).
Added localization support for libslic3r through a callback
(the callback is not registered yet, so the localization does nothing).
Localized the Print::validate() error messages.
Squashed commit of the following:
commit 931eb2684103e8571b4a2e9804765fef268361c3
Author: Lukas Matena <lukasmatena@seznam.cz>
Date: Wed Jun 20 12:50:27 2018 +0200
ToolOrdering::WipingExtrusions now holds all information necessary for infill/perimeter wiping
commit cc8becfbdd771f7e279434c8bd6be147e4b321ee
Author: Lukas Matena <lukasmatena@seznam.cz>
Date: Tue Jun 19 10:52:03 2018 +0200
Wiping is now done as normal print would be (less extra code in process_layer)
commit 1b120754b0691cce46ee5e10f3840480c559ac1f
Author: Lukas Matena <lukasmatena@seznam.cz>
Date: Fri Jun 15 15:55:15 2018 +0200
Refactoring: ObjectByExtruder changed so that it is aware of the wiping extrusions
commit 1641e326bb5e0a0c69d6bfc6efa23153dc2e4543
Author: Lukas Matena <lukasmatena@seznam.cz>
Date: Thu Jun 14 12:22:18 2018 +0200
Refactoring: new class WipingExtrusion in ToolOrdering.hpp
as the opengl context may not be ready on some platforms (Linux)
at the time the window gets its focus for the first time.
Changed the G-code preview invalidation to trigger when the print
gets invalidated. At that time the 3D path preview switches to the old
preview, if there is anything valid left.
as the GCode is generated outside of the Print class.
Exported the GCodePreviewData as GCode::PreviewData to Perl.
When exporting the G-code with a command line Slic3r,
the GCodeAnalyzer is now supressed for performance reasons.
Removed obsolete Perl module Slic3r::GUI::Plater::3DToolpaths.
due to the differences in the M203 code
(RepRap firmware has it in mm/min, Marlin in mm/sec).
This difference is important to the G-code time estimator.
Changed the g-code flavor to Marlin for all Prusa3D bundled profiles.
