bubnikv
2455aee97c
Further reduction of Perl Config.pm methods.
2017-10-27 18:52:35 +02:00
bubnikv
401059066e
Switched to Perl local::lib for local compilation.
...
Taken from upstream Slic3r, thanks @alexrj.
2017-08-18 09:58:50 +02:00
bubnikv
f0325575c2
Slic3r has been modified to propagate the following filament specific
...
values to GCode generator, one per active extruder:
bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time
Now it remains to extend Slic3r to correctly apply these values.
2017-06-21 16:15:39 +02:00
bubnikv
e0a24f94c0
Removed Object.pm support_material_flow method.
2017-06-08 18:13:12 +02:00
bubnikv
616788a600
Disabling the support tests until the test suite is modified
...
for the new supports.
2017-02-26 23:16:26 +01:00
bubnikv
38cb2842ac
support_material_synchronize_layers implementation
2016-11-30 16:06:12 +01:00
Alessandro Ranellucci
13b63d06ed
Use thick raft layers as we do for support material layers. #2723
2015-03-09 20:00:55 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
6eb1fa36ed
Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656
2015-02-14 12:47:33 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
33f7b08c80
Fix t/support.t after changing contact distance on top surfaces
2014-12-24 12:11:30 +01:00
Alessandro Ranellucci
21ea100d0e
Fixed tests
2014-12-17 01:15:47 +01:00
Alessandro Ranellucci
59f0c64e1c
Fixed regression test for #2301
2014-11-07 17:27:16 +01:00
Alessandro Ranellucci
4b013d7a48
Added failing test for bridge speed not being used for first object layer above support material. #2301
2014-10-18 14:08:40 +02:00
Alessandro Ranellucci
82e2dd4e62
Bugfix: wrong number of raft layers in some situations due to a numerical error
2014-06-11 21:58:28 +02:00
Alessandro Ranellucci
4e5f7d74ff
Bugfix: wrong handling of large number of raft layers. #2041
2014-05-25 23:17:00 +02:00
Alessandro Ranellucci
7ba08c90cf
Refactoring to Model API for making it stricter and safer
2014-05-09 14:24:35 +02:00
Alessandro Ranellucci
9c7cc484bc
Update t/support.t still assuming default support material pattern was honeycomb
2014-03-27 00:28:26 +01:00
Alessandro Ranellucci
66045faf81
Fix error in t/support.t
2014-01-14 13:41:39 +01:00
Alessandro Ranellucci
89d3dbaa5a
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
...
Conflicts:
lib/Slic3r/Print/Object.pm
2014-01-11 23:26:48 +01:00
Alessandro Ranellucci
07b9b12475
Make tests pass
2014-01-05 00:36:33 +01:00
Alessandro Ranellucci
5bf0942f45
Satisfy test suite and CLI
2014-01-02 17:24:23 +01:00
Alessandro Ranellucci
20f1f3d2b4
Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567
2013-12-23 20:31:50 +01:00
Alessandro Ranellucci
c08d4cc798
Fixed support unit tests and reduced dependency on $object
2013-10-26 17:56:59 +02:00
Alessandro Ranellucci
a7989e382c
Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375
2013-09-17 23:51:30 +02:00
Alessandro Ranellucci
d69c956e75
Update t/support.t
2013-09-17 23:32:01 +02:00
Alessandro Ranellucci
73c05a6092
Moved vibration limit to its own G-code filter
2013-08-28 20:37:56 +02:00
Alessandro Ranellucci
913f401280
Merge new-support2
2013-07-29 20:50:26 +02:00
Alessandro Ranellucci
7a8e1e778a
New test to ensure brim and raft are extruded with the support material extruder. #123
2013-06-07 13:38:29 +02:00
Alessandro Ranellucci
f5e48a306d
Bugfix: support material and brim didn't work correctly. Includes unit test. #1074
2013-03-30 00:21:09 +01:00
