Because the function in print.cpp mistakenly considers models with different variable layer height configurations to be the same, the layer height configurations of the copied objects are optimized and overwritten. Fixed function: auto is_print_object_the_same = [this](const PrintObject* object1, const PrintObject* object2)
jira: STUDIO-13507
Change-Id: Ic4b3a479e8984b46a2f9557f65826951b8979646
(cherry picked from commit 2d5137914e9699c4fe9ddbbc76f13b85dbc3a1a9)
In print.cpp, logic was added to skip checking for mixed prints when using the byobject mode. This prevented false positives for single-filament objects, but it also failed to detect mixed prints. This detection has been restored, but separate logic for byobject mode has been added to the detection function: StringObjectException Print::check_multi_filament_valid(const Print& print). This will only prompt a warning when a single object contains high- and low-temperature filaments.
jira: STUDIO-13667
Change-Id: I37622e49b76581ea4a2d78c97ebcd655bb7199e6
(cherry picked from commit 7128758056f1fe11bdd953e7f3d91284b15535a9)
1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
and fix conflict checking when the wipe tower's brim fully encloses the model
jira: STUDIO-10237, STUDIO-10296
Change-Id: I6e2a6640c06ddb6b3af700c9048fa26434411631
(cherry picked from commit b36c41e5146168325d8b7ec966eb97f1062442a7)
of the wipe tower's outer wall to use the actual outer wall path.
jira: none
Change-Id: Ib45ecbc328c88c1abe6d9e8567f715331a3ddd37
(cherry picked from commit 0a20f1fe6d6d63cdcb13bc19fd9ae553f45b6f59)
1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
1. Only check printablily if have explicit filament map
2. Refine some sentences
jira:STUDIO-9753,STUDIO-9727
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2fc3aa2276dc6f514c50ac2fcaf9509f41e778f3
(cherry picked from commit 73f92d27dab667c8893ab96e47f3832ce9d2de60)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
1.Always set filament retract params to filament_num size.In
gcode export module, we can always use filament idx to get
retract params
2. add logic in update_filament_maps_to_config to update the
retraction related params which can be overiden by filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia45dd1401aa3565d062d5da1c9f4a2ba8966f693
(cherry picked from commit 4b083d8d8220b8f65a1b804688cb2d6e238eb4e6)
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
(cherry picked from commit 7b5818fe6c538123373243ec8dfedc3c2fa68e6d)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
