Alessandro Ranellucci
1d04e15b63
Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity.
2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
3edf42e98e
Little workflow simplification
2012-07-21 15:53:38 +02:00
Alessandro Ranellucci
bce2663ed8
Restore thin walls and thin fills after last commit
2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
3c00573805
Reset E and compensate retraction after changing extruder
2012-07-06 19:57:58 +02:00
Mark Hindess
07f2dab5f6
Fix perimeters_* options to be singular to be consistent.
2012-06-30 23:18:15 +01:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
5eb1982081
Bugfix: brim was extruded multiple times when sequential printing was enabled
2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933
Revert "Reduce memory usage during gcode output by discarding processed layers."
...
This reverts commit 4d1551c305
2012-06-30 16:12:06 +02:00
Mark Hindess
4d1551c305
Reduce memory usage during gcode output by discarding processed layers.
...
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big. So this removes
the list entry after it's been processed.
2012-06-29 12:33:30 +01:00
Alessandro Ranellucci
fb96cdec76
Command line options to assign perimeters and infill to different extruders
2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
f9f2361acb
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66
Rename support_material_tool to support_material_extruder
2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
898266fd34
Initial refactoring for supporting multiple extruders. Little speed optimization included
2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
e72bd56b9d
Rename brim_thickness to brim_width
2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
48addf8c3f
New feature: brim. #424
2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
44c636aea1
Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462
2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
20229fccdb
Bugfix: fatal error when a layer contained nothing
2012-06-23 18:31:24 +02:00
Alessandro Ranellucci
464400a37b
Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object
2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310
Do perimeters from outside to inside. #466
2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
b926e0b27d
Support material lines need to be white
2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e
DLP support material in SVG output (untested)
2012-06-11 14:47:48 +02:00
Alessandro Ranellucci
1f35a3f6aa
Fixed regression preventing SVG export to work properly. #428
2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
c0c84d13b8
Always set bed temperature after first layer if first layer temperature is set. #427
2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8
Pass config options as environment variables to post-processing scripts
2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
aedb6cc35f
Accept both relative and absolute extrusion width values. #151
2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
ea83c562c1
Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396
2012-05-31 09:37:39 +02:00
Alessandro Ranellucci
8aa20cd784
Fixed the "Export SVG..." menu item. #399
2012-05-30 12:06:01 +02:00
Alessandro Ranellucci
bc4b4a981b
Take extruder clearance radius into account when autopositioning
2012-05-29 09:38:53 +02:00
Alessandro Ranellucci
34e3dfdb08
Large memory savings (down to about 50%) for high-res input files
2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
5a78111efa
Options to set extruder clearance for sequential printing and graphical preview of collisions
2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
e7d609db12
Fix previous commit about slicing from smallest to tallest
2012-05-21 20:23:17 +02:00
Alessandro Ranellucci
e4b37db13f
Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting)
2012-05-21 20:19:30 +02:00
Alessandro Ranellucci
181f750618
Invert SVG colors for DLP printing. #380
2012-05-21 18:29:19 +02:00
Alessandro Ranellucci
ce6b4aeaee
New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape)
2012-05-20 20:08:59 +02:00
Alessandro Ranellucci
731367a6a0
Bugfix, support material still not working well after memory optimizations
2012-05-20 11:44:30 +02:00
Alessandro Ranellucci
1998801a58
Read OBJ files. #324
2012-05-20 11:40:37 +02:00
Alessandro Ranellucci
b246480535
Massive reduction of memory usage (down to one third).
2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
edbdc5ec55
New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198
2012-05-05 16:36:10 +02:00
Alessandro Ranellucci
847cf3c5b8
Bugfix: when slicing the same plate multiple times, the results contained old and duplicate data
2012-05-02 15:20:05 +02:00
Alessandro Ranellucci
7ee08be0b8
Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318
2012-05-01 15:02:33 +02:00
Alessandro Ranellucci
49ff9a0ebe
Emit G92 E0 when in relative mode. #322
2012-05-01 14:49:41 +02:00
Alessandro Ranellucci
0f3cbe6fa4
Bugfix: G-code errors with multiple objects
2012-05-01 13:18:01 +02:00
Alessandro Ranellucci
54e1d934a7
Fixed regression with support material
2012-04-30 23:36:49 +02:00
Alessandro Ranellucci
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
4bc49dcc5b
Fixed regression throwing fatal error when using --duplicate-grid
2012-04-29 19:01:18 +02:00
Alessandro Ranellucci
ed4a5739f6
Multiple objects autoplating (--merge, from command line only)
2012-04-29 12:51:20 +02:00
