# Description
This PR addresses the issue that WipeTower's start z position didn't consider the z_offset.
fixes#11611
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the changes made in this PR.
-->
# Description
Fix application freeze when Prime Tower brim is set to Auto
This PR fixes an issue where enabling Auto brim width for the Prime Tower caused the application to freeze and consume unbounded amounts of memory.
Root cause
0c5f6c9865/src/libslic3r/GCode/WipeTower2.cpp (L2036-L2039)
When Auto brim is selected, the brim width was not being computed and the raw configuration value (-1) was used directly.
This resulted in an effectively infinite loop during Prime Tower brim generation, leading to runaway memory allocation instead of a controlled failure or a crash.
Solution
The Auto brim width is now properly computed based on the Prime Tower height, matching the intended behavior and existing logic used in other slicer implementations.
* fixes: wxTimerEvent not supposed to be created by user code [-Wdeprecated-declarations]
* use wxTimerEvent instead of wxCommandEvent.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Emit Disable Power Loss Recovery
Now only works if it's enabled but the goal it's to force disable it.
With this change it will always emit the command for BBL or Marlin 2.
Co-Authored-By: Michael Rook <54159303+michaelr0@users.noreply.github.com>
* Refactor power loss recovery G-code comments
* Return empty power loss recovery when no compatible printer
* Update power loss recovery comments
Update label and tooltip for power loss recovery
* Add enum for power loss recovery mode
Refactored power loss recovery configuration to use a new PowerLossRecoveryMode enum instead of a boolean. Updated GCodeWriter and related logic to handle the new enum, allowing for 'printer_configuration', 'enable', and 'disable' options. Updated config handling, legacy value conversion, and default values accordingly.
* Update PrintConfig.cpp
---------
Co-authored-by: Michael Rook <54159303+michaelr0@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Replace spline with PchipInterpolatorHelper in flow compensator
Swapped out the tk::spline implementation for PchipInterpolatorHelper in SmallAreaInfillFlowCompensator. Updated member types and method calls to use the new interpolator for improved flow compensation modeling.
* Enforce strictly increasing flow compensation factors
Added a check to ensure that flow compensation factors in SmallAreaInfillFlowCompensator strictly increase with extrusion length, throwing an exception if this condition is not met. This improves input validation and prevents invalid compensation models.
* Add context to Small Area Flow Compensation errors
Prefixed error messages in SmallAreaInfillFlowCompensator with 'Small Area Flow Compensation' for improved clarity and debugging. Also rethrows exceptions after logging to ensure proper error propagation.
* Remove spline library from dependencies
Eliminated the spline header-only library from the project by deleting its CMake configuration and header file, and updating documentation and build scripts to remove references to spline. This streamlines the dependencies and build process.
* Brim can follow EFC outline
* Optimization
* Update Spanish EFC brim description
Adopt reviewer-proposed wording from RF47.
Co-authored-by: RF47 <RF47@users.noreply.github.com>
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Tooltip update
---------
Co-authored-by: RF47 <RF47@users.noreply.github.com>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Relocated Clipper2 source files and CMake configuration from src/clipper2 to deps_src/clipper2. Updated CMakeLists to add Clipper2 as a dependency from the new location, improving dependency organization.
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Fix adaptive fill issues
- Disconnecting from walls at low density
- Not supporting rotation
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Grid non-crossing for multiline
cleaning
Replaced negative offset logic with surface contraction to reduce overlap with perimeters.
center the infill
filltriangles
update triangles
preallocate memory
Update FillRectilinear.cpp
Update FillRectilinear.cpp
overlapp adjustment
Fix Crash
Update FillRectilinear.cpp
density tunning
density tunning
fine tunning
reserve polilines
Grid non-crossing for multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: discip <53649486+discip@users.noreply.github.com>
* Improve multiline fill offset and polyline closure
Changed offset type from jtRound to jtMiter in multiline_fill for better geometry. Updated polyline conversion to require at least 3 points and ensured polylines are closed if not already. Updated FillGyroid, FillTpmsD, and FillTpmsFK to pass the 'close' argument to multiline_fill.
cleaning
FillAdaptive Noncross
Only use clipper if worth it
safeguard
fix overlap
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
Update FillRectilinear.cpp
fix 3d honeycomb
Simplify polylines
Update FillBase.cpp
Update FillBase.cpp
cleaning
Improved Multiline Function
This ensures `multiline_fill()` will correctly generate multiline infill with
closed loop polylines if the input infill line is a closedloop polyline. This
ensures that the multiline infill doesn't have little gaps or overlaps at the
"closed point" of the original infill line.
This changes how the tangent is calculated for the first and last points in a
polyline if the first and last points are the same, making it a closed loop.
Instead of just using the first or last line segment, it uses the line segment
between the points before the last point and after the first point, the same
way that all the other poly-line mid points are handled.
It also uses eigen vector operations to calculate the points instead of
explicitly calculating the x and y values. This is probably faster, and if not
then it is at least more concise.
Hibrid Multiline Function
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
clipperutils multiline hibrido
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
multiline hibrido
arc tolerance
multiline con union
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: Donovan Baarda <dbaarda@gmail.com>
* Switch multiline offset logic to Clipper2
Replaces Clipper-based multiline offset logic in FillBase.cpp with Clipper2, using InflatePaths and Union for offsetting and merging. Adds new conversion utilities in Clipper2Utils for handling Paths64 to Polygons/Polylines and updates headers accordingly.
* Refactor multiline_fill to always use Clipper2 logic
Removed the 'use_clipper' parameter from multiline_fill and updated all callers to use the new signature. The function now consistently applies Clipper2-based offset logic for multiline infill, simplifying the code and ensuring uniform behavior across fill patterns.
* Change offset join type to Round in multiline_fill
Replaces the Miter join type with Round in the InflatePaths call within multiline_fill. For smotther print travels.
* Increase max infill multiline to 10
Raised the maximum allowed value for the 'Fill Multiline' infill parameter from 5 to 10 to support more lines in infill patterns.
* Refactor multiline_fill to optimize offset logic
Replaces manual conversion of polylines to Clipper2 paths with Slic3rPolylines_to_Paths64 and filters short paths using std::remove_if. Uses ClipperOffset for path inflation and streamlines merging and conversion to polylines, improving performance and code clarity.
* half iteration because is bucle
* Funciona 1
Refactored the multiline_fill function to streamline the insertion of center lines by directly checking for odd line counts and removing redundant logic. This improves code clarity and reduces unnecessary checks.
* Refactor multiline_fill for improved offset logic
Reworked the multiline_fill function to simplify and clarify the logic for generating multiple offset lines. The new implementation computes offsets more explicitly for odd and even cases, creates a fresh ClipperOffset for each band, and improves conversion between Clipper2 paths and polylines. This enhances maintainability and correctness of the multiline fill generation.
* Quartercubic multiline
* fillplanePath
fix bounding box
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fillconcentric multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Update FillBase.hpp
* cleaning
* Refactor multiline_fill to clean polylines and reuse offsetter
Invalid polylines with less than two points are now removed before processing. The ClipperOffset object is created once and reused for each offset, improving efficiency and code clarity.
trigger build
* Optimize Filltrapezoidal
Refactored the trapezoidal fill pattern generation to precompute base row templates and reuse them with vertical translation, reducing redundant computations and improving code clarity. This change enhances performance and maintainability by avoiding repeated construction of row patterns within loops.
* Replace push_back with emplace_back for Polyline points
Updated Polyline point insertion from push_back to emplace_back for efficiency and clarity. Also refactored row copying logic to avoid in-place modification, improving code readability and safety.
* Update FillRectilinear.cpp
* Reserve space for poliline points
* Union not needed
* Update FillRectilinear.cpp
* unused functions
* compactado
Update FillRectilinear.cpp
* Adjust minimum rows for better performance
* Update FillRectilinear.cpp
---------
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Co-authored-by: Donovan Baarda <dbaarda@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Refresh filament setting overrides on preset change
The filament “Setting Overrides” page derives its UI state from multiple configs
(filament, printer, process), but this derived state was not recomputed during
preset reloads.
As a result, override widgets could reflect stale values until the page was
revisited or a user interaction triggered an update.
Recompute the filament setting overrides as part of TabFilament::reload_config(),
keeping the derived UI in sync with the active preset immediately after reload.
* Adjust resonance avoidance speed calculation
* Only adjust if it's strictly below max
* If the speed is over half of the set speed range,
use the max speed to prevent slowdowns
Signed-off-by: Kuran Kaname <celtare21@gmail.com>
* update comment
---------
Signed-off-by: Kuran Kaname <celtare21@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Show printer bed based on BBL vendor not network
* add comment
---------
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix object list name refresh after emboss edits
Refresh the object list immediately after embossed text name changes so the displayed name stays in sync.
Fix filament preset undo/dirty tracking to match Bambu behavior
Use deep compare for filament presets so vector options report #idx keys.
Align undo/dirty mapping with indexed fields and Bambu’s filter_diff_option.
Pass explicit indices for filament override fields.
Add missing filament variant keys (retract lift bounds, ironing overrides) to filament_options_with_variant so per‑filament undo works.
