smooth pei plate uses the same parameters as high temp plate
JIRA: STUDIO-4181
Change-Id: I9db8ca7440b5b205902fd4b35af6c24440e1104d
(cherry picked from commit 97e803f62e7d02ff171c2c63e261d319d49ce398)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial port of organic tree support from PrusaSlicer
* Port missing Organic support parameters from PrusaSlicer
* Update parameter naming
* Reorganize the `raft_first_layer_expansion` and `raft_first_layer_density` parameters as they are not only used by rafts
* Reset support style only in simple mode
* Sync latest update from PrusaSlicer & copyrights
* Fix organic tree support crash with invalid parameters
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
This popup dialog was introduced to promote tree slim
style. Now it's time to remove it.
Change-Id: I34c0be56b4dc613e6e991dd87ab22eb4eaa1feb3
(cherry picked from commit 827c692a1877bfec914ef8f5a55c7357ed6e94d2)
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)