1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
The original patch can't fix empty layer issue
Revert.
This reverts commit 152a650fb80a84523e977b15f5f30d28837d80e9.
Change-Id: Ib6d47ac981fca24ca953b45068703bbcd231cf95
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add paint-on support on vertical faces of slender rods
Jira: Studio/STIDIO-970
Change-Id: If280b570a8076059b5583f385ba6517bf305723b
(cherry picked from commit 6832ee98ac146421c061fa90840c2751c3b3d875)
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
1. fix the prefer_model issue
2. when a printer is visible and no filament is selected, just set its default materials to visible
3. add some log for shutdown debug
Change-Id: I599dbd9c8b180c944ff4086c7638267ff002f94a
1. create user folder if not exists
2. add a tips for binding a printer
3. fix sdcard tips
4. modify icons
5. refine layout of task options
Change-Id: Ic0529cf1e8bdde0128052bc42454f6e6aaae87ca
Signed-off-by: Stone Li <stone.li@bambulab.com>
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
now we save volume's matrix seperately,
so we don't need to adjust the vertex order anymore while saving to 3mf
Change-Id: I71b865c44f0d99e2e88e34cd253fcfba583f345c
empty region after adding the modifier cube
this fix for STUDIO-1025
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5ed35b54f8ee9d2fdc387d1b4391021e4e82aaad
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
Lighting infill has not been enabled on this branch.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3c8d1f57fd36e73eaec190a43bf9f5868667d9b
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Sync some code change and fix from Prusa.
Thanks Prusa.
This also can fix github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6993e0149733ccf85ed85f82553caa03df7ac60
