As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
When the model has no overhang, user may disable overhang
slowing down.
In this case, it's unnecessary to calculate overhang
degree which make slicing slow when model is complex.
This is improvement for github issue #331.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2eaeca3ee4068f76709fe97535bbf05c0d27c062
1. hybrid(auto) on_buildplate_only option not working correctly because
parent is not set.
2. tree(auto) on_buildplate_only not working correctly because unsupported
branch isn't deleted completely. I add child to track the dangling nodes
and then delete nodes with no child.
Change-Id: I24c69a7cf400d2961b22a720a6069cf95db6c1a5
(cherry picked from commit bce77c16128d35c668b175e7135b9fe9acd71d13)
Find some problem for the change of bridge, revert.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib195a9b4425fa54408bcd3842bbafc41a3c79409
1 move thick bridge from support to quality page
2 Fix the issue that some times the external bridge angle
is not the best, and the bridge line is not the shortest one.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie26570fb289898f6b62960f9333e79aa92c08ae4
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
This is fix for crash issue for some specific step
file, which generate empty mesh.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910e3d2da670b623570665265a12361492bd706b
1.show flush of every filament
2.modify first-layer text display
3.show time in seconds when time cost < 1h
4.forbid add-filament when print by-object
Change-Id: Ib8a94b9f620797e367bfc9e8a33abd5d7ab648ec
Enable arachne for concentric pattern by
referring to PrusaSlicer
Also remove useless pattern we added.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie2574f7fc4751ebdf1caab4de52013f3101e104f
This is fix for github issue #216 that
sometimes the infill layer is empty.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie3be08b75506e48f5ae9dd6aae2ae729ba666e01
the max length of linux's thread name could only be 16 bytes
bambustudio_main can not be set by pthread_setname_np
Change-Id: Idab83896c81787b32f6a4dde869b101da1d69e5c
add tips when both print by object and smooth mode are selected
Change-Id: I13f4cc14f2ff7c33c23dcd1708fdb784aef5afa3
(cherry picked from commit a0bfe48df21d4eecf105d41387838f14b22fff3c)
Fix the issue that the first 2 layers of prime tower are not generated
when timelapse is set to smooth mode. This issue only happens in single
filament printing.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
All extruder offset should be extruder_offset[0] when
it is single extruder multi material.
Add handling when load config from gcode.
This is fix for github issue #213
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia881b2bfbbdffa98e3c3db7b35201dc86b520b29
