1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
(cherry picked from commit 62a71d5b1947474d3d86be9015551c1007c89702)
Auto-arranging allows more filaments to be printed on the same plate
Only HighTemp and LowTemp filaments are not allowed on the same plate.
Jira: https://jira.bambooolab.com/browse/STUDIO-4682
Change-Id: I1bd4966e6aaa55a6dd9dff05f0bd94f2795a62b0
(cherry picked from commit 965040912af0555ca190702e7c7ac92e177a2922)
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz>
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Only use MCut to do boolean, with a little modification to allow input
mesh to have multiple components.
Jira: STUDIO-3167
Change-Id: I4f53010f76fbcacfe966c2ef48e465f97d6516fe
(cherry picked from commit 92d0eb11744820466ee2f67c02d4764e496b7e60)
when the cached object is skipped
we need to reslicing it;
also do overhang detect for all objects
Change-Id: Ic842fd5a441426983a760145aeff9285e398d430
As title. This function need to be used in calibration
page.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia4228cbd195d87f433b59bc14129bd4acdd9df68
brim bounding box is now shifted w.r.t. plate origin, need to modify the
no-brim shift the same way.
Change-Id: Iefa7287e2848aadbfc4a468bca394ecec48a1e7c
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
This can avoid to simplify wall twice when
the only invalid step is infill.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5a9ccc10d5331c29c716aece08cdb195352cfe3
1. improve sharp detection for small regions.
When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
Only popup warning for sharp tail and large cantilever (longer than 6mm).
Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
1. add gcode conflict checker
2. add a new command line option: --no_check. When it's provided, gcode
conflict check is skipped.
Change-Id: I6feafca8c5fa6c3c5eae1f0e541ce59d2f03dedf
(cherry picked from commit 5a39afb64e826a960d9673dcada89d02d62b3911)
now, when XY compensation with negative value is assigned, the brim can be
generated correctly (Studio-2222). In addition, one can add brim to a model whose
first layer is empty while second layer is not empty (studio-1286).
Change-Id: I28443dc6e28bc6fff8c92d3cc35ab7a416d43138
(cherry picked from commit cb62afcfd295ca93962d99350d1dfaf3441c4759)
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
1. unsupported sharp tails and large overhang have different messages
2. do not popup warning for total area (only warning for one single
large overhang)
Change-Id: I153e559915a92c6676468539cf619dafe915f997
(cherry picked from commit 67b593150f8de847d9b1999bf0d7a549eb1ef154)
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
