Ocraftyone
4c2559d2c4
Merge remote-tracking branch 'upstream/main' into enh-spoolman-support
...
# Conflicts:
# src/libslic3r/Preset.cpp
2024-09-22 08:50:51 -04:00
Tom
c8216accfd
Tsmith35 per BS PR4631 ( #6709 )
...
ENH: support spiral lift with timelapse gcode
The existing implementation did only read the new Z position from the injected timelapse_gcode and flagged the position as unsafe because of this.
This change reads X, Y and Z pos from the timelapgse_gcode and will keep the position state correct to enable safety checks required for using spiral Z hop.
Because of this, spiral Z hop can be used everyhwere now. The same pattern is also applied for layer_change/toolhead gcode injection.
The set_current_position_clear method is unused but will be kept in implementation for future scenarios.
Co-authored-by: Simon ziehmon@users.noreply.github.com
2024-09-14 23:52:04 +08:00
Noisyfox
92b933f274
Fix issue that "total filament used [g]" is missing from gcode ( #6728 )
...
* Fix issue that "total filament used [g]" is missing from gcode
2024-09-11 22:17:32 +08:00
vovodroid
5165515167
Rename skirt types
2024-09-07 12:02:39 +03:00
SoftFever
5b5cd478c2
Merge branch 'main' into skirt-object-fix-pr
2024-09-07 10:57:59 +08:00
Ioannis Giannakas
1ff5424819
Bug fix: Avoid crossing walls feature removes some retraction wipes ( #6518 )
...
* Bug fix: Avoid crossing walls feature removes some retraction wipes
* Merge remote-tracking branch 'upstream/main' into Bug-Fix-Avoid-crossing-walls-removing-wipe-moves-when-retraction-was-happening
* Merge branch 'main' into Bug-Fix-Avoid-crossing-walls-removing-wipe-moves-when-retraction-was-happening
* Merge branch 'main' into Bug-Fix-Avoid-crossing-walls-removing-wipe-moves-when-retraction-was-happening
2024-08-27 23:26:43 +08:00
vovodroid
2a8b39acd4
Object skirt
2024-08-26 13:48:51 +03:00
Vovodroid
a7d2ae0450
Fix crash when both Flow compensator and Verbose Gcode are enabled. ( #6428 )
...
* Fix crash when both Flow compensator and Verbose Gcode are enabled.
2024-08-25 12:39:15 +08:00
vovodroid
83346aaffa
Configure skirt start point
2024-08-24 15:37:46 +03:00
Vovodroid
2acd858bf3
Remove unused parameter from place_seam method ( #6421 )
2024-08-18 16:32:56 +08:00
SoftFever
7082e945b1
Revert "Fix Compile Warnings ( #5963 )"
...
This reverts commit b83e16dbdd
2024-08-12 00:00:20 +08:00
SoftFever
68945e07e8
write correct extruder_colour to gcode
...
fixes #6288
2024-08-02 21:40:03 +08:00
Ioannis Giannakas
c5d417ed89
Improve overhang slowdown granularity & line segmentation handling ( #5996 )
...
* Increase granularity of extrusion move splitting for small line segments ending in an overhang
* Parameter tweak
* Increase granularity of estimation for curled perimeters
* Adjust parameters following experimentation with overhang prints
* Updated overhang segmentation logic
* Cleanup code comments
2024-08-01 22:38:08 +08:00
SoftFever
4b2a09bd07
Merge branch 'main' into feature/support-fliament-cutter-explore-proper-flush-lenght
2024-07-29 23:21:48 +08:00
SoftFever
5e2f145c34
Merge branch 'main' into feature/multitool
2024-07-29 22:51:13 +08:00
Ocraftyone
b83e16dbdd
Fix Compile Warnings ( #5963 )
...
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-07-29 21:00:26 +08:00
Vovodroid
83a9b2513a
Reverse draft shield direction on even layers to reduce thermal stress. ( #5789 )
...
* Reverse draft shield direction on even layers to reduce thermal stress and warping.
* Use reverse() to make code clear.
2024-07-28 23:26:34 +08:00
Ioannis Giannakas
529c44d8e3
Enhancement: Adaptive Pressure advance ( #5609 )
...
* Adaptive Pressure advance options setup
* Dynamic PA - PCHIP interpolator code and tests
* Integrate dynamic PA with slicing code - emit new PA values per speed change
* Link adaptive PA to role change instead of speed change
* Adaptive PA - Alpha 2
Reduce the frequency of requested PA changes by introducing a "state" variable.
Implement user toggle for adapting PA for external walls for overhangs
* Hide adaptive PA for overhangs
* Convert Adaptive PA to use volumetric flow model and start preparing for converting to Gcode post processor
* Converted Dynamic PA to a post processing filter. Reverted changes in GCode cpp and created tagging mechanism to allow filter to apply PA changes.
* Removed adaptive PA for overhangs
* Foundations for two dimensional adaptive PA based on acceleration and volumetric flow speed
* Minor code cleanup and updating of tooltips
* Renaming files for better clarity and generate classes documentation
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Updates for multipath handling part 2
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Trigger PA evaluation more frequently to catch edge cases where speed changes across islands of the same feature type.
* Updates for multipath handling part 2
* Adaptive PA: Implement average flow estimation on loops
* Code formatting
* Fix adaptive PA not adapting for small disconnected external wall line segments.
* Updated to take max print speed of upcoming feature to calculate new PA value.
This is to resolve issue of incorrect PA value used when starting a new feature at an overhang.
* Code clean up
* Performance tuning
* Further performance tuning by reducing use of regex commands in the nested loops and fix bug preventing gcode line output
* Further performance tuning and tweaks to stop searching for max speed after the first travel move.
* Reduce debug information
* Updated debug info
* Fix an issue on seams on specific models when wipe before external perimeter was enabled. Also cleanup documentation and add new to-do's
* Prepare for adaptive PA for overhangs, fix wipe bug & clean up code and comments
* Initial commit for adapting PA when extruding fully overhanging perimeters
* Ignore wipe command when identifying current print speed
* Option to evaluate adaptive PA on overhang regions in preparation for Klipper experimental option testing
* Update to issue PA changes for varying flow conditions within the same feature
* Fix bug where adaptive PA was enabled erroneously for role changes and ignoring user's preference.
* Refactored some code
* More refactoring
* Some bug fixes and enabled comments only when verbose g-code is enabled
* Introduced dedicated PA option for bridges
* Code refactoring to optimise initialisation of PA processor (making it faster). Fix a bug where PA was not always set after a toolchange. Improve general error handling and robustness.
* Updates to adaptive PA tooltips
* Bridging PA check with Epsilon instead of 0.
* Adaptive PA: addressing comments
---------
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
2024-07-28 22:52:08 +08:00
Vovodroid
543a1e5c37
Use one loop for draft shield ( #5786 )
2024-07-27 12:27:58 +08:00
SoftFever
b65967978b
Always calculate wipe volume and hence provide correct flush_length to custom change filament g-code, so that MMU devices with cutter and purge bin (e.g. ERCF_v2 with a filament cutter or Filametrix can take advantage of it)
2024-07-24 23:41:08 +08:00
SoftFever
6d7071bf2d
add "temperature" variable support
2024-07-24 19:58:34 +08:00
SoftFever
b0bd16e908
hide/disable options accordingly
2024-07-23 00:43:12 +08:00
SoftFever
c36d4ad7c9
Fix misc bugs
2024-07-23 00:12:54 +08:00
SoftFever
13ddb38119
force restore Z
2024-07-21 23:29:15 +08:00
enricoturri1966
7d0fb4f42a
preheat work - part 1
2024-07-21 10:29:42 +08:00
Vojtech Bubnik
71be87ecef
Fixed crash if toolchange G-code modifies final position,
...
because the extruder was not set yet.
2024-07-15 21:47:10 +08:00
SoftFever
0b8515ed20
support Prusa XL
2024-07-13 23:29:16 +08:00
SoftFever
4bca54873d
Fix ooze prevention bug
2024-07-12 23:03:07 +08:00
SoftFever
c3f0b5e565
ooze prevention update: sync with PrusaSlicer
2024-07-10 21:40:11 +08:00
SoftFever
1c68d58343
support has_single_extruder_multi_material_priming
2024-07-10 21:40:10 +08:00
SoftFever
c2320e03a5
tool changer support - init work
2024-07-10 21:40:09 +08:00
Christos Karampeazis-Papadakis
7707685069
Disable small area flow compensation on first layer ( Fixes #4617 ) ( #5838 )
...
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-07-01 18:13:50 +08:00
Vovodroid
a13152c61f
Add travel_slope option ( #5873 )
...
* Add travel_slope option
* Merge branch 'main' into travel-slope-pr
2024-06-29 17:33:22 +08:00
Ocraftyone
1928db4b4e
Merge branch 'main' into enh-spoolman-support
2024-06-25 04:41:03 -04:00
Ocraftyone
d253098850
Fix typos
2024-06-25 02:44:29 -04:00
SoftFever
34ad17bcd2
Fix small area flow comp regression and some other small tweaks ( #5844 )
...
* Fix regression, always create SmallAreaInfillFlowCompensator model
small_area_infill_flow_compensation is per-region parameter, it's not necessary to iterate though all regions to check whether to create a model.
* Make SmallAreaInfillFlowCompensator robus.
1. handle spaces/tabs/new lines etc
2. don't throw expection, fall back to no-op instead if parsing failed
* Fixing an issue that changing small_area_infill_flow_compensation per modifier didn't take effect
2024-06-25 00:20:20 +08:00
Ocraftyone
6659208cf0
Merge remote-tracking branch 'refs/remotes/SoftFever/main' into enh-spoolman-support
...
# Conflicts:
# src/slic3r/GUI/PhysicalPrinterDialog.cpp
2024-06-22 03:32:03 -04:00
zhimin.zeng
022c2ff53e
FIX: Unwanted skirts when printing By Object
...
github: 4002
Change-Id: Id2df01bb0d296c5fea2bf53947b57abbb8eb0786
2024-06-15 20:15:35 +08:00
cochcoder
0b233f23b5
Fix time cost not being considered in total cost ( #5698 )
...
* Fix time cost not be added in total cost
2024-06-15 14:56:14 +08:00
Ocraftyone
6eda6c1793
Merge branch 'main' into enh-spoolman-support
2024-06-06 08:18:18 -04:00
Ocraftyone
5cf815c9a7
Merge remote-tracking branch 'refs/remotes/SoftFever/main' into enh-spoolman-support
...
# Conflicts:
# src/slic3r/GUI/Tab.cpp
2024-06-05 02:19:10 -04:00
Ocraftyone
b395da52f6
Spoolman Statistics Moved to Preset
...
Spoolman statistics are now stored in the filament preset and are not saved to a file
2024-06-05 01:47:31 -04:00
SoftFever
9a4429f603
Fixed an issue that small_area_infill_compensation_model was initialized even it's not used.
...
Fixed #5550
2024-06-04 23:14:22 +08:00
Noisyfox
2f265ef083
Fix issue that skip object won't trigger filament change when print-by-object is used ( #5576 )
...
* Fix issue that skip object won't trigger filament change when print-by-object is used
2024-06-04 20:00:56 +08:00
SoftFever
c083541e0a
Thumbnails feature revamp. ( #5555 )
...
* Thumbnails feature revamp.
Support generating different size/format combinations
* misc fix
Co-authored-by: Lukas Matena <lukasmatena@seznam.cz>
2024-06-03 21:30:38 +08:00
William
194ec6b1cd
feat: add model_name and plate_number placeholders ( #5401 )
...
This uses the BBS project name from the `Project` tab which could be
susceptible to upstream changes removing this feature.
The project_name template only works when you open a 3MF file. If you
create a new project and set the project name `Model.model_info` is
always null whether you save the project or not. If you save the current
project, switch to a new project/different project, then re-load it then
the template works as expected.
The plate number is assumed to always be <100 which matches the
formatting of the plate number in the UI.
Relates-To: https://github.com/SoftFever/OrcaSlicer/issues/3816
2024-05-24 20:52:35 +08:00
Dima Buzdyk
966c18cbad
fix slow_down_layers ( #5396 )
...
Setting slow_down_layers to 2 or more results in wrong number of slowed
down layers.
Do not increment layer_id since bottom layer (#0 ) handled separately.
2024-05-24 20:00:09 +08:00
Ioannis Giannakas
dd36d5b1ea
Implemented minimum skirt extrusion length and draft shield parameter ( #5356 )
...
* Implemented minimum skirt extrusion length parameter
* Enabled draft shield option
* Update Tab.cpp
* Updated draft shield to be visible in the Advanced mode
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-05-20 19:04:13 +08:00
Ioannis Giannakas
de5c1c80e3
Fix bed mesh algorithm for 3 point bicubic algorightm ( #5296 )
...
* Fix bed mesh algorithm for 3 point bicubic algorightm
* Corrected + to *
* Amended algo to mirror KAMP
* Updated from feedbacl
2024-05-09 22:02:05 +08:00
SoftFever
226450ea6a
Merge some features from BS1.9 beta4 ( #5181 )
...
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia
github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder
Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59
* FIX: auto-arranging incorrect with rotation enabled
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
* ENH: update X1C & X1E start gcode
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
* ENH: update A series gcode
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
* FIX: fix some cali problem of P series
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
* FIX: fix can't enter ',' in multiplicator
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
* calib wizard
* NEW: FlipLines infill
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
* ENH: add nozzle blob detection and air printing detection
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
* FIX: Top surface bridging fail on 3DHC & FL infill
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
* FIX: the error display when reset virtual slot
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
* FIX: Error "Voronoi cell doesn't contain a sourcepoint"
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
* fix build error
* FIX: CLI: fix the crash issue caused by get_min_flush_volumes
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
* FIX: can't use support filament in gcode.3mf
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
* ENH: p series support long retraction
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
* ENH::modify some logs level
jira:[for log]
Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117
* NEW: support multi device
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH: update A1 series gcode
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
* FIX: always have 0th filament in ams mapping
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
* ENH: add filament id in slice info
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa
* ENH: refine ui for multi machine
JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel
Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce
* FIX: fix Issues with sending multiple devices
JIRA: STUDIO-6876
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918
* NEW: support hms error code
Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4
* FIX:fixed some multi job issue
Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46
* NEW:support pin code binding
Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13
* ENH:add printable check for devices
Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)
* FIX: add more fonts
jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)
* ENH: load more fonts
this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz>, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)
* ENH: add ProfileDescription for translate
1.Add ProfileDescription.hpp simply for translating
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f
* ENH: Improve CrossHatch transation layers
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
* UP
* ENH: modify the default config for multi-device
JIRA: STUDIO-6072
Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH: add long retraction for P series
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
* FIX: all plates stats data missing issue
jira: new
Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f
* ENH:update pre print options
jira:[for multi]
Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81
* FIX:fixed can't popup pinbind win on macos
jira:[STUDIO-6895]
Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21
* FIX:fixed the task of padding cannot be cancelled
Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9
* ENH:Play video after redirecting to device page
jira:[STUDIO-6884]
Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54
* FIX: fix ui bug in send multi machine page for mac
JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing
Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922
* FIX: Fix some bugs in maintaining the selected status of local tasks
JIRA: STUDIO-6824
Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5
* ENH: local task sort by send time by default
JIRA: STUDIO-6885
Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc
* FIX: Clicking to continue printing does not take effect in error code
JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect
Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9
* ENH: use designTitle when designId > 0
JIRA: STUDIO-6072
Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:import vertex and mtl color from obj file
Jira: STUDIO-6805
Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f
* FIX:change the strategy of merge_ka_kd
Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805
Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)
* FIX:use default_strategy after modifed cluster number
jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac
* FIX: the bug of incorrect button without restarting
JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears
Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e
* FIX: wrong default value for long retraction
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
* FIX: error code pop-up window without retry button in some code
JIRA: STUDIO-6922
Change-Id: I67464bebaba4558618301592c455db8824bbfe30
* FIX: air printing and nozzle blob detection issue
jira: STUDIO-6897
Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799
* FIX:fix bugs of algo and read quad in obj file
Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61
* dd
* ENH:Set the default nozzle diameter to 0.4
jira:[for nozzle]
Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052
* FIX:fixed backspace error on macos
Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c
* ENH:Subscription list deduplication
jira:[for mulit]
Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e
* ENH:update wiki url for Pin Code
jira:[pin code]
Change-Id: I95faaa396a839b5b159119ef235b650c76706a84
* NEW:add OpenCV.cmake in deps
jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41
* FIX:cancel obj import restrictions
jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c
* NEW:add multiple printer restrictions
jira:[for multiple]
Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a
* ENH:Added two entrances for adding devices
jira:[multi device]
Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74
* slic3r: Fix wxFont being undefined
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
51 | bool can_load(const wxFont &font);
| ^~~~~~
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
127 | BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
| ^~~~~
| perror
[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
40 | BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
| ^~~~~~~~~~~~~~~~~
* fix OpenCV
* wip - build break
* fix build error wip
* ENH: support preset description(tooltip)
Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754
* fix more build errors
* Revert "ENH: load more fonts"
This reverts commit 32b6fd199a
2024-04-28 22:58:47 +08:00
