Alessandro Ranellucci
464400a37b
Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object
2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310
Do perimeters from outside to inside. #466
2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
410279823c
New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459
2012-06-23 17:10:30 +02:00
Mark Hindess
f61a1f5a07
Create *::Geometry::nearest_point_index to speed up shortest_path method.
...
This fix gives a further 10% speedup on simcop2387's coaster.
2012-06-22 23:12:39 +01:00
Mark Hindess
62eb41b967
Manage flattened endpoint list rather than creating it at every iteration.
...
Gives an 8% speedup on simcop2387's coaster for me.
2012-06-22 23:12:39 +01:00
Alessandro Ranellucci
a578af9d28
Fix support material
2012-06-21 11:51:24 +02:00
Alessandro Ranellucci
94e28b9ab8
Require Math::Clipper 1.09 because it contains important bugfixes
2012-06-21 10:53:04 +02:00
Alessandro Ranellucci
be8970b497
Fixed regression causing infill lines not being always connected near perimeters
2012-06-19 18:49:46 +02:00
Henrik Brix Andersen
8fcf24a766
Merge pull request #467 from henrikbrixandersen/ratio-options
...
Two small ratio option improvements/bug fixes
2012-06-19 06:44:16 -07:00
Henrik Brix Andersen
4031cf26b4
- Add Slic3r::Config::get_raw() for getting the raw, uncalculated values.
...
- Use get_raw() for saving and displaying options in GUI
2012-06-19 15:32:56 +02:00
Henrik Brix Andersen
8d25e6490a
Set CLI option type to 'string' for all options allowing ratio inputs
2012-06-19 11:38:12 +02:00
Henrik Brix Andersen
b7d2860d5b
Allow negating bool cli options by using '--no-foo' or '--nofoo'
2012-06-18 23:39:53 +02:00
Alessandro Ranellucci
48d345c189
Bugfix: first_layer_speed was accepting mm/m values rather than mm/s when expressed as absolute. #452
2012-06-17 19:42:11 +02:00
Alessandro Ranellucci
217a6f2525
Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453
2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
7d6545dd07
Further simplification of point_in_polygon()
2012-06-17 19:09:11 +02:00
Mark Hindess
2ef565fc4d
Simplify creation of $n, @x and @y in point_in_polygon test.
...
Gives 30% speed up on simcop2387's coaster on my laptop and it cuts the
maximum resident set size too. I know this is going to be replaced but
thought this might be useful in the meantime.
2012-06-16 08:28:37 +01:00
Alessandro Ranellucci
ca8a91b2b0
Only apply arc compensation to circular holes. #418
2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
b00d960f4d
Merge pull request #450 from henrikbrixandersen/growl
...
Move Growl::GNTP handling to Slic3r::GUI
2012-06-14 05:35:25 -07:00
Henrik Brix Andersen
129f0fa904
Move Growl::GNTP handling to Slic3r::GUI to allow notifications from both Slic3r::GUI::SkeinPanel and Slic3r::GUI::Plater.
2012-06-14 13:49:50 +02:00
Nicolas Dandrimont
4296ea6da1
Slic3r::Polygon's boost_linestring method needs to close the contour.
...
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour). This
addresses some of the bridge detection issues (#414 , #358 ).
2012-06-14 13:33:59 +02:00
Henrik Brix Andersen
3aa901f149
Show version and description in About dialog
2012-06-12 23:51:59 +02:00
Henrik Brix Andersen
65d6a83672
wxID_EXIT is already imported, no need to specify package name
2012-06-12 23:47:59 +02:00
Henrik Brix Andersen
230d4377c9
Fix display of special menu items (wxID_ABOUT, wxID_EXIT) on OS X
2012-06-12 23:46:50 +02:00
Alessandro Ranellucci
b926e0b27d
Support material lines need to be white
2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e
DLP support material in SVG output (untested)
2012-06-11 14:47:48 +02:00
Alessandro Ranellucci
1f35a3f6aa
Fixed regression preventing SVG export to work properly. #428
2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
71c1c66985
Label and CLI option were wrong for top_solid_infill_speed. #425
2012-06-11 13:45:03 +02:00
Alessandro Ranellucci
c0c84d13b8
Always set bed temperature after first layer if first layer temperature is set. #427
2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8
Pass config options as environment variables to post-processing scripts
2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
62bd33a766
Fixed regression causing fatal errors. #429
2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
0c4b112718
Fixed regression preventing arcs to be generated at all (center detection is still buggy)
2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
c0c53c4397
Fill gaps. #281
2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
00c6b1bdf8
Bugfix: some thin walls still gave a fatal error. #416
2012-06-07 12:21:33 +02:00
Alessandro Ranellucci
0226039dfb
Fixed regression when cooling is enabled
2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
caa32ab282
Fixed regression causing flow errors when using legacy config files. #421
2012-06-07 11:24:45 +02:00
Alessandro Ranellucci
709c444976
Fixed fatal error when using --first-layer-extrusion-width
2012-06-07 11:17:35 +02:00
Alessandro Ranellucci
5c9916dc75
Some basic ability to close holes in non-manifold models
2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
85ef7ce665
Bugfix: many thin walls were not detected correctly. #313
2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f
Bugfix: not retracting between infill of different islands using low infill densities. #242
2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666
Lift Z when changing layer too
2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692
Warn user when object couldn't be split
2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe
Fixed regression causing some models not to be sliced correctly. #410
2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f
Legacy config files were not correctly supported
2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733
Update: preview area was not updating to the largest side of the build area
2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c
Accept either absolute or relative values for --first-layer-height. #151
2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e
Renamed bottom_layer_speed to first_layer_speed for consistency
2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566
Support for legacy config files containing bottom_layer_speed_ratio. #151
2012-06-06 15:48:14 +02:00
