Commit graph

140 commits

Author SHA1 Message Date
Noisyfox
a9a6f45f08
Merge branch 'main' into dev/support-paint-vertical 2025-02-23 15:50:21 +08:00
Ioannis Giannakas
b4a7721cc0
Enhancement: Additional controls over bridges (#8263)
* Additional control over bridges

* Label updates

* Detect and handle layers over external bridges

* Label updates

* To-Do placeholders

* Filter out small external bridges

* Apply safety offset for internal bridge polygon intersections

* code comments

* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)

* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.

* Fixing bugs

* Convert tick boxes to drop down menu

* Additional geometry checks for second internal bridge to ensure no small polygons are left over.

* Minor code refactor for clarity

* Further refinements in polygon logic

* Polygon logic refinements pt3

* Further union operations to ensure clean geometry

* Fix compile error

* Clean up constructors

* Only create bridges on stInternalSolid areas, not sparse infill.

* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks

* Revert change to only consider stInternalSolid areas for second internal bridge layer.

This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill

* Updated beta statements and tooltip changes

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2025-02-12 22:10:57 +08:00
Eric Maglio
5145707801
Add "2D Lattice" fill pattern for lightweight aircraft structures (#8293)
* Add 2D lattice infill pattern

* Add state invalidation behavior for lattice infill angles

* Update SurfaceFillParams methods to account for lattice infill angles

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
2025-02-12 08:39:29 +08:00
Ioannis Giannakas
229a826aa7
Enhancement: Internal Bridge angle override (#7908)
Internal Bridge angle override
2025-02-09 22:00:16 +08:00
Arthur
1c686b3c04 ENH: improve tree supports
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
   circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
   strength can be improved by increasing this value.

Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
(cherry picked from commit 7697eb3dc8f87204d28e6be9adaf55dfcdadbc74)
2025-02-08 11:34:46 +08:00
Arthur
3e7e4df7ce ENH: precise tree support wall count
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.

jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
(cherry picked from commit a557bbe758cd352fa9bb48323995ed2c90737577)
2025-02-08 11:34:42 +08:00
Arthur
ae6fadda4d ENH: add vertical support enforcer
Previously painting support enforces on vertical faces doesn't work, as projecting the facets downwards will give empty polygons.
Now we use a different mechanism to enable vertical paint-on enforces, by directly adding contact nodes.
Note: this feature only works with tree support as only tree support has contact nodes.

jira: none
Change-Id: Id171b1665566d142a6427285baccb40c0aa00949
(cherry picked from commit 9c882f61eb37350a4486df58de48f0ae489f2d15)
(cherry picked from commit 68625a6e601e2feef8e56693da1f58372b27b560)
2025-02-08 11:34:40 +08:00
Arthur
5054ee8508 ENH: improve hybrid tree support
1. do not add interface for small overhangs so supports are easier to
   remove
2. calculate avoidance more accurately using real layer height
  jira: STUDIO-6285
3. hybrid nodes won't collide with lower layers
4. calculate max move more accurately
5. do not increase radius if next layer has collision
  jira: STUDIO-2296, STUDIO-7883
6. rewrite plan_layer_heights to prevent support layers overlap.
  Now the tree support layers are completely independent to object layers.
6. increase collision areas for interface. The top layers may be too
close to interface with adaptive layer heights and very small overhang angle

Change-Id: I052c3f66e68afb7663e2d70c846dd09ed7086071
(cherry picked from commit aca511caebfdeec270d4fc0ec6bbbadde77cddc9)
(cherry picked from commit f2fc996652b3b204b4e554f57afed8519feb0397)
2025-02-08 11:34:39 +08:00
Arthur
fd3ed419c2 NEW: add support_object_first_layer_gap option
jira: STUDIO-6202
github: #3521

Change-Id: I6f1ce9f5312e9482c0f5bf6ac3215861c501106c
(cherry picked from commit 83027d923a6e67fa0013e5d9f627283c68e996de)
(cherry picked from commit 29da3bc441a194d5b83ce267fe24ebf3f3811133)
2025-02-08 11:34:30 +08:00
Arthur
31a5f0d523 FIX: Checking support necessity not working
Only early stop detect_overhangs if support is disabled AND not checking support necessity.

jira: STUDIO-6158
Change-Id: I2d9662231d941827d6392d57344f7d911f641e09
(cherry picked from commit b811a6031d1afe0e7b1cb73050fe6391a65411ef)
(cherry picked from commit fa61ee6abdb4b04a2141b3f8ea9e2e8a789b7881)
2025-02-08 11:34:25 +08:00
Nick Johnson
fd0b2547f2
Add support for structured noise (perlin) fuzzy skin (#7678)
* Add support for perlin noise fuzzy skin

* Support multiple types of coherent noise

* Updated tooltips for more clarity.

* Reorder options as suggested by @discip

* Fix accidental removal of &

* Move libnoise to deps

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2025-01-27 22:45:16 +08:00
Vovodroid
7a5746b1ae
Support threshold overlap (#6606)
* Support threshold overlap

* Update tooltip
2025-01-23 18:01:38 +08:00
Ioannis Giannakas
d7789282b9
Fixes for Xcode 16.0 debugger crashing (with relwithdebinfo) (#6932)
* Fixes for XCode 16.0

* Merge branch 'main' into Xcode-16-debug-fixes

* Merge branch 'SoftFever:main' into Xcode-16-debug-fixes

* Merge branch 'main' into Xcode-16-debug-fixes

* Merge branch 'SoftFever:main' into Xcode-16-debug-fixes

* Merge branch 'SoftFever:main' into Xcode-16-debug-fixes

* Merge branch 'SoftFever:main' into Xcode-16-debug-fixes

* Merge branch 'main' into Xcode-16-debug-fixes
2024-12-21 22:39:21 +08:00
Vasily Khoruzhick
16e532f73e
libslic3r: include tbb/spin_mutex to fix compilation error (#7505)
PrintObject.cpp references tbb::spin_mutex, thus it needs to include
tbb/spin_mutex. Otherwise compilation fails with:

error: ‘spin_mutex’ is not a member of ‘tbb’

Supersedes #7057
2024-11-28 22:32:54 +08:00
Noisyfox
ff265745c6 Update PrintObject::_generate_support_material() to match BBS 2024-09-30 14:12:30 +08:00
Noisyfox
97d1745e5a Update files related to support to match BambuStudio's project structure 2024-09-30 14:12:29 +08:00
SoftFever
4e25217927
Fix bridge anchor when bridge is also the top surface (#6654)
Fixes #6642

Cherry picked from b133579126
Huge thanks for their excellent work!

![image](https://github.com/user-attachments/assets/8fc054bb-68da-4f8f-82bd-943bcf0b80c0)
2024-09-07 16:23:44 +08:00
Ioannis Giannakas
2c5478ee96
Combined infill max layer height (optional) parameter (#6401)
* Combined infill max layer height parameter

* Combine sparse infill - allow % over nozzle diameter too.

* Updated defaults and tooltips

* Update PrintConfig.cpp
2024-09-07 16:20:46 +08:00
Noisyfox
63ebebf4a0 Improve debugging output 2024-09-05 09:45:59 +08:00
Ioannis Giannakas
0ba4181a06
Ported filament shrinkage compensation for XY and independent Z from Prusa Slicer (fixing MMU painting, seam painting, support painting issues) (#6507)
* Ported filament shrinkage compensation from Prusa Slicer. Updated logic to be 100 = no shrinkage to be consistent with orca definitions

* Code comments update

* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer

* Merge remote-tracking branch 'upstream/main' into Filament-Shrinkage-compension---port-from-Prusa-slicer

* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
2024-08-28 23:15:39 +08:00
SoftFever
7082e945b1 Revert "Fix Compile Warnings (#5963)"
This reverts commit b83e16dbdd.

Found regressions like auto orientation didn't work anymore after this change, revert it
2024-08-12 00:00:20 +08:00
SoftFever
8ed2911db8
Properly find used extruders when infill/wall_filament is set (#6335) 2024-08-04 12:37:26 +08:00
SoftFever
83c50b2ad1 Toolchanger: fix an issue that wall_filament/sparse_infill_filament/solid_infill_filament didn't always work 2024-08-04 00:54:03 +08:00
SoftFever
5e2f145c34 Merge branch 'main' into feature/multitool 2024-07-29 22:51:13 +08:00
Ocraftyone
b83e16dbdd
Fix Compile Warnings (#5963)
* Fix calls to depreciated wxPen constructor

* Fix use of wxTimerEvent

* Fix unrecognized character escape sequence

* Fix signed/unsigned mismatch

At least as much as possible without significantly altering parts of the application

* Clean unreferenced variables

* fix mistyped namespace selector

* Update deprecated calls

* Fix preprocessor statement

* Remove empty switch statements

* Change int vector used as bool to bool vector

* Remove empty control statements and related unused code

* Change multi character constant to string constant

* Fix discarded return value

json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.

* Rename ICON_SIZE def used by MultiMachine

By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.

* Remove unused includes

* Fix linux/macOS compilation

* Hide unused-function errors on non-Windows systems

* Disable signed/unsigned comparison mismatch error

* Remove/Disable more unused variables

Still TODO: check double for loop in Print.cpp

* Remove unused variable that was missed

* Remove unused variables in libraries in the src folder

* Apply temporary fix for subobject linkage error

* Remove/Disable last set of unused variables reported by GCC

* remove redundant for loop

* fix misspelled ifdef check

* Update message on dialog

* Fix hard-coded platform specific modifier keys

* Remove duplicate for loop

* Disable -Wmisleading-indentation warning

* disable -Wswitch warning

* Remove unused local typedefs

* Fix -Wunused-value

* Fix pragma error on Windows from subobject linkage fix

* Fix -Waddress

* Fix null conversions (-Wconversion-null)

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-07-29 21:00:26 +08:00
SoftFever
c2320e03a5 tool changer support - init work 2024-07-10 21:40:09 +08:00
Noisyfox
4145f45e42
Port of Cura's multi-material interlocking (#5775)
* Init port of Cura's MM interlocking

* Refactor a bit

* Fix crash when bottom surface is multi-color

* Fix crash when boundary avoidance is 0

* Add config

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-06-30 23:25:15 +08:00
SoftFever
34ad17bcd2
Fix small area flow comp regression and some other small tweaks (#5844)
* Fix regression, always create SmallAreaInfillFlowCompensator model
small_area_infill_flow_compensation is per-region parameter, it's not necessary to iterate though all regions to check whether to create a model.

* Make SmallAreaInfillFlowCompensator robus.
1. handle spaces/tabs/new lines etc
2. don't throw expection, fall back to no-op instead if parsing failed

* Fixing an issue that changing small_area_infill_flow_compensation per modifier didn't take effect
2024-06-25 00:20:20 +08:00
zhimin.zeng
2ac41509d7 FIX: modify top_shell_layer should reslice
jira: none
Change-Id: Ied85b87ea4e036a60024977c50ac926c7293a5e1
2024-06-16 01:44:31 +08:00
SoftFever
b3fff4ffd5 Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary. 2024-06-15 14:56:44 +08:00
SoftFever
ad341ec9e6
Feature/merge bs1.91 (#5394)
* fixed logic error in PLA jamming gcode for P1S

* Fix use after free bug in LinesBucketQueue::emplace_back_bucket
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
    auto oldSize = line_buckets.capacity();
    line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
    line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
    ...

The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.

* Updated to fix the handling of the capacity change, and removed the code I previously added to reserve upfront since it is not really needed

* Remove accidentally added whitespace

* Removed unused method

* ENH:add mz_zip_reader_extract_to_file_w api

to solove plugin install failed problem by special wide char
jira: none
Change-Id: Ic7d3efe3fdf852387650abf9df65803da9e46a60
(cherry picked from commit b68ad03717a63675fef2f3ef73d4058bf311adea)

* FIX: PrinterFileSystem report real connect error

Change-Id: I99d6ff7f6dcb1f53ccf59854f5f19d0bd39fa9fc
Jira: none

* rename preference name

* FIX:Relax restrictions on importing obj files

jira: none
Change-Id: I61a0156a8424a5f59922956918d37d38e2c3306a

* FIX: [6469] popup dialog too mach when reload object

Jira: 6469

Change-Id: I4097e3a3b018c7a676fea93bf63f8f778bb3148b

* FIX:fixed incorrect display of printer options page on Linux

jira:[STUDIO-6220]

Change-Id: Id1f084658b0b340b7f17ab97ba82c0fd3ae83fae

* FIX: handle exception of dividing by zero in arranging

jira: none
Change-Id: I0d20464dbe81a80293539100f06d72dee456a27b
(cherry picked from commit 94746ae9bf7f467243849570450567b4fdc78e3a)

* ENH:delete no use code

jira: none
Change-Id: I40e7ffa7ea47bb3cd4039eef9f6c28c604eb3abc

* FIX: PrinterFileSystem::FileRemoved

Change-Id: I891aaa8d58ff379dc1ebd8581064865a33388f74

* FIX: resend ttcode to printer on -90 error

Change-Id: I96dc45102a2759a9f1a0002f42c3a91b2c6b2d75
Jira: STUDIO-5947
(cherry picked from commit 97d687b7c88f8cd51b8eddd39120349d8eac42b1)

* FIX: fix some issue in multi machine

JIRA: STUDIO-6934 STUDIO-6888
1. Fix the issue of incomplete display caused by excessively long file names
2. Fix the issue of icon display being too large
3. Fix the issue of garbled Chinese characters in the task list

Change-Id: I36bc10bf2067f44aaa7e3651b58e526ea323c8ad

* FIX: Incorrect multiplier, when the multiplier is set to below 1

github: #3987 #3805
1. In some languages that use commas as decimal points, setting multiplier below 1 will resolve to 0
2. Unable to save multiplier correctly

Change-Id: I62bc55e270929ebb5e910eb79c6f97106e842b93

* Arrange

* FIX: wrong wipe tower when open 3mf file

1.wipe tower pos in 3mf was overwritten by default pos when opening 3mf
with a different printer profile.This patch fix it

jira: STUDIO-5890

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I12e5d4b80a0ad86194db0682c1763ba4a9492521

* ENH: update A1 machine gcode

1.Adjust the y position of the A1 extrusion compensation line

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa

* FIX: minor spelling mistake in gcode

github:#3477

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1

* FIX: slice crash with height_range

github: 3917
Change-Id: Icdf83013213b47935b7a795ed75cc3d49057665d

* FIX: ERROR_RES_BUSY text

Change-Id: Ifde1a7b0c6ab915eb226c2072c46edd40f60cf9a
Jira: STUDIO-6436

* ENH:Unable to send printing without selecting a device

jira:[STUDIO-6850]

Change-Id: Ic537579727fd1618af364db93fce8fbbe4cd635a

* FIX:add exit_gizmo before slice model

jira: STUDIO-5531
Change-Id: Icddc9d73b3d91bb68e9768d13e48cbae0680e58e

* FIX: PrinterFileSystem report real connect error

Change-Id: Id6750cfa2a98fe8325ba677dabb606a0a701b495

* FIX: add can slice judgement in slice all plates processing

jira: STUDIO-6325

Change-Id: Ic7fb8cef000c03210bb77289a570ee6b60b6083e

* FIX:Fixed error in displaying the name of Bambu filaments

Change-Id: Ib42194c07b6eefe793eec81a588debc9d622d951

* FIX: text hidden in calibration tab

jira: STUDIO-6264

Change-Id: I24fbc590638a3213d948a973422e010486113923

* FIX: logic error in PLA fan control

github PR: #3948

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe

* FIX:upgrade cluster algorithm to remove duplicate labels

jira: none
Change-Id: I4d68d8cd8e080932c7c308bc8f69e27546ffe309

* FIX: can not parse json float in ES on macOS

jira: STUDIO-5889

Change-Id: I622f4b474c378d77b0e43d67a320f023be2d5811

* ENH:Clear the value of the previous nozzle type

jira:[for nozzle check]

Change-Id: I9a932b833fb07de6cb0a91abe6372b0e91f273f1

* ENH: update A1 gcode

1.Modify the width of extrusion compensation line

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8

* FIX: the height range is not valid in assemble object

github: 3876
Change-Id: Id38672bbf0c01bc9b9f0a3e2bf1052d945b45131

* FIX: calibration page text hidden in linux

jira: STUDIO-6264

Change-Id: If210abf64057eb2e9c2c5b11d41fa33f18684c72

* ENH:clear nozzle information

jira:[STUDIO-7050]

Change-Id: I15ca4973d09132ddb5cb5a56bedd795ba6976b27

* update plugin version

---------

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: afriede <me@afriede.dev>
Co-authored-by: Momin Al-Ghosien <momin@sanestudios.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
2024-05-19 21:22:14 +08:00
SoftFever
5daecf3583 switch res for large printer 2024-05-12 23:35:41 +08:00
Ioannis Giannakas
46b7a2953d
Adjustable infill wall overlap for top and bottom surfaces (#4832)
* Adjustable infill wall overlap for top and bottom surfaces

* Compile error and tool tip updates
2024-05-09 23:36:30 +08:00
SoftFever
c2f5660afd
Infill direction enhancements (#5267)
* infill direction wip

* rotate solid infill dir
2024-05-05 13:36:54 +08:00
SoftFever
226450ea6a
Merge some features from BS1.9 beta4 (#5181)
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia

github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder

Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59

* FIX: auto-arranging incorrect with rotation enabled

auto-arranging incorrect with rotation enabled and the objects already have been rotated.

jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)

* ENH: update X1C & X1E start gcode

1.Fix fan problem

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610

* ENH: update A series gcode

1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d

* FIX: fix some cali problem of P series

jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f

* FIX: fix can't enter ',' in multiplicator

github: #3805

Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea

* calib wizard

* NEW: FlipLines infill

jira:6701

New infill pattern that combine block lines infill and switching layers for smooth transition.

Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)

* ENH: add nozzle blob detection and air printing detection

jira: new

Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302

* FIX: Top surface bridging fail on 3DHC & FL infill

Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill

jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)

* FIX: the error display when reset virtual slot

jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5

* FIX: Error "Voronoi cell doesn't contain a sourcepoint"

github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf

* fix build error

* FIX: CLI: fix the crash issue caused by get_min_flush_volumes

JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2

* FIX: can't use support filament in gcode.3mf

1. Add total_filament_volumes, directly access it to get used filaments

github:#3865

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717

* ENH: p series support long retraction

1. P series support long retraction in filament
2. Add long retraction params in common.json

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18

* ENH::modify some logs level

jira:[for log]

Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117

* NEW: support multi device

JIRA: STUDIO-6072

Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH: update A1 series  gcode

1.Update filament change gcode and machine start gcode for
  A1 and A1 mini

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e

* FIX: always have 0th filament in ams mapping

1. Only set the filament id in map when flush length is not 0

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67

* ENH: add filament id in slice info

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa

* ENH: refine ui for multi machine

JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel

Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce

* FIX: fix Issues with sending multiple devices

JIRA: STUDIO-6876

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918

* NEW: support hms error code

Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4

* FIX:fixed some multi job issue

Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46

* NEW:support pin code binding

Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13

* ENH:add printable check for devices

Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)

* FIX: add more fonts

jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)

* ENH: load more fonts

this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz>, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)

* ENH: add ProfileDescription for translate

1.Add ProfileDescription.hpp simply for translating

jira:NEW

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f

* ENH: Improve CrossHatch transation layers

jira: 6701

Change name from Flippingline to CrossHatch.

Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.

Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51

* UP

* ENH: modify the default config for multi-device

JIRA: STUDIO-6072

Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH: add long retraction for P series

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213

* FIX: all plates stats data missing issue

jira: new

Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f

* ENH:update pre print options

jira:[for multi]

Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81

* FIX:fixed can't popup pinbind win on macos

jira:[STUDIO-6895]

Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21

* FIX:fixed the task of padding cannot be cancelled

Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9

* ENH:Play video after redirecting to device page

jira:[STUDIO-6884]

Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54

* FIX: fix ui bug in send multi machine page for mac

JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing

Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922

* FIX: Fix some bugs in maintaining the selected status of local tasks

JIRA: STUDIO-6824

Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5

* ENH: local task sort by send time by default

JIRA: STUDIO-6885

Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc

* FIX: Clicking to continue printing does not take effect in error code

JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect

Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9

* ENH: use designTitle when designId > 0

JIRA: STUDIO-6072

Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com>

* NEW:import vertex and mtl color from obj file

Jira: STUDIO-6805

Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f

* FIX:change the strategy of merge_ka_kd

Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805

Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)

* FIX:use default_strategy after modifed cluster number

jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac

* FIX: the bug of incorrect button without restarting

JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears

Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e

* FIX: wrong default value for long retraction

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32

* FIX: error code pop-up window without retry button in some code

JIRA: STUDIO-6922

Change-Id: I67464bebaba4558618301592c455db8824bbfe30

* FIX: air printing and nozzle blob detection issue

jira: STUDIO-6897

Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799

* FIX:fix bugs of algo and read quad in obj file

Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61

* dd

* ENH:Set the default nozzle diameter to 0.4

jira:[for nozzle]

Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052

* FIX:fixed backspace error on macos

Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c

* ENH:Subscription list deduplication

jira:[for mulit]

Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e

* ENH:update wiki url for Pin Code

jira:[pin code]

Change-Id: I95faaa396a839b5b159119ef235b650c76706a84

* NEW:add OpenCV.cmake in deps

jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41

* FIX:cancel obj import restrictions

jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c

* NEW:add multiple printer restrictions

jira:[for multiple]

Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a

* ENH:Added two entrances for adding devices

jira:[multi device]

Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74

* slic3r: Fix wxFont being undefined

[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
   51 | bool can_load(const wxFont &font);
      |                     ^~~~~~

* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration

[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
  127 |         BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
      |                           ^~~~~
      |                           perror

[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
   40 |         BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
      |         ^~~~~~~~~~~~~~~~~

* fix OpenCV

* wip - build break

* fix build error wip

* ENH: support preset description(tooltip)

Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754

* fix more build errors

* Revert "ENH: load more fonts"

This reverts commit 32b6fd199a.

* change colors

* misc fixes

* restore export gcode btn

---------

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
2024-04-28 22:58:47 +08:00
SoftFever
1bb8fad63f
Merge some changes from BS 1.9 (#4994)
* FIX: do not touch the plate with different printing sequence

jira: STUDIO-5424
Change-Id: I8ad00fa991b753de126a5bef0d320c452033e2e7
(cherry picked from commit c4adfe16e285f238f2c5cd8938b2167fdfb6b1b0)

* FIX: global arrange setting is wrong

global arrange setting is wrong if a plate's setting is changed from object list

jira: STUDIO-5438
Change-Id: Iaa7f35837edbacff9b97ca17a8ab34c8e6bb023d
(cherry picked from commit fa2f56575b2e4305e35dd59ff55e0881720de025)

* FIX: temperature symbols not shown correctly

Need to use wxString::FromUTF8 to convert unicode symbols to wxString.

jira: none

Change-Id: Ia8b559d437c956a2cc28916d8963823356402d05

* FIX:Repair calculation process of plate_box

Jira: STUDIO-5520
Change-Id: I4c3f9597542ad2dfec4d7849e75fa28272fa4ea3

* FIX:frequent calls to _update_imgui_select_plate_toolbar

Jira: STUDIO-5488
Change-Id: I12e6f37c2fe94de004aa6da43421970d6df10f0f

* FIX: & is not displayed on the sending print page

Jira: STUDIO-5343

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I1736bb97433581ff117bfe09afe8ee70c1b08fc4

* FIX: file name is not fully displayed if it is too long

Jira: STUDIO-5230
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I992fa0c0575afbd2eecb2af02c8a305eda028f7f
(cherry picked from commit d0d7fb0b1394429ee9d28d8ef4060a286ba0112d)

* FIX: The warning box still exits when the temperature has reset.

Jira: STUDIO-5562

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I7532db69880449eb3fa0a14fc4dfc61e7f6d518e
(cherry picked from commit 589ed5fe045b5e7ec3effe437c9685085960c0fc)

* FIX: White circle is not clear on auto refill page

Jira: STUDIO-3262

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I05ac6257638063d32a9943c09bb7c14cc9229b3a

* FIX: Groove text ctrl is not wide engough

Jira: STUDIO-5434

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I93c0995473a72b5c19bc413c38c090906e360455
(cherry picked from commit e4a8b0ef5e62ba0053dc782c30ea79b237a46ac3)

* FIX: values are not saved when clicking on an empty space

Jira: STUDIO-4637

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I837050029635f673b3ae671ea1ad049aaf4fdd16

* FIX: Temperature warning is not fully displayed

Jira: STUDIO-5038

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I460cbe2a5d0a092c4257b7bd5192058bf2e4707b

* NEW: display bitmap when calibrating

Jira: STUDIO-4661

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I60cf4f9769feca74699012418880e93fcfe34432
(cherry picked from commit 1213aea816694405311dc0c1061655a4c2a1d067)

* FIX: remember the flow ratio calibration type

Jira: STUDIO-5181
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Id6125d1d4ea58972ce55c2c2498259596b25111e
(cherry picked from commit 1af1038fd4824d989e992cb630cf34e00c787af7)

* FIX: File panel crash on scroll

Change-Id: I56833a376fa52c960efea5fbd60003367ba410c2
Jira: STUDIO-5337, STUDIO-5513

* FIX: auto arranging skip unprintable high items

Jira: STUDIO-5646
Change-Id: I72dc3d8c71a075bab8204f4418e869a7a34c0c8e
(cherry picked from commit 0afdf8361493485da2254c426719594fd9a982ed)

* FIX: MediaFilePanel error state

Change-Id: I318ef59fb97478ffee16dff594022b2b9029964a
Jira: STUDIO-5638

* FIX: sync whole preset vendor directory

Change-Id: I191dbe979a87ff35d38cab1149b7975664344838
Jira: STUDIO-5534

* ENH: support turn off liveview auto retry

Change-Id: I24b39f74e0a40a13277d6eae3830c95c5c9de333
Jira: none
(cherry picked from commit f6ceb3fb8e4df3f876c50a1c4ba96b4a1be60190)

* FIX: SwitchButton auto scale font

Change-Id: If4004c0963cc8bb2f41e8e71c304d5239bf252ab
Jira: STUDIO-4969 STUDIO-4921

* FIX: set WEBKIT_DISABLE_COMPOSITING_MODE=1 for linux gtk

Change-Id: I8a500585ca815948bab1210578ba5c45858ed78e
Jira: STUDIO-5199

* FIX: Prefer old selection when sync AMS not compatible

Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a
Jira: STUDIO-5416

* ENH: show liveview stat

Change-Id: I70d1f458aa2ed379ad7fe07dee76fbe035316420
Jira: none

* NEW:remember custom color

Jira: STUDIO-5635
Change-Id: I439080f6a8ddb6fde3899cffbabc3b6e66afbd96

* FIX: copy live555 dll

Change-Id: Idf727b8e26107e93aa9934299e87dc71531d1c63
Jira: STUDIO-4480

* FIX: optimize batch update object list on macOS

Change-Id: I92e24cc53c0b3bf0658d15abc64292f0e17c0a82
Jira: STUDIO-5440 STUDIO-5515

* FIX: network plugins tip disappear on dark mode

Change-Id: I422ab63f71158a49920438f01dd9c39774c27744
Jira: STUDIO-4891

* FIX: Display inconsistence in parameter table

JIra: STUDIO-3716

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I986473bcbb3efff4abd9c5917926d9e888a4f28c

* FIX: Incomplete copy display in Transfer or discard dialog

Jira: 5569 5549

Change-Id: I757b636259d7e1a222b9fc09276c12235360fd57

* FIX: Limit the max length of k when calibrating

Jira: STUDIO-4291

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ie7cff086cf2a3c744213525d5d83f9ac4b55333d

* fix build break

* FIX: delete sdcard file crash

Change-Id: I814fd4b557fa92ac4060cbeb18a53f5616e49662
Jira: STUDIO-5977

* FIX: Yield when join media thread

Change-Id: I746d7df88a0de8363da7d9507cb63c9e0ffe970a
Jira: STUDIO-5952

* FIX: Guide page can't show in screen with mainframe

Jira: STUDIO-4911

Change-Id: I7e89614e0f1585263456c847a1b38dcfd0ad59e6

* FIX: filament combox has blank line

Change-Id: Ia39ddb564b3c9cc943d0ea4c0cf7cc4d24bef799

* FIX: load 3mf crash when studio has no base filament

Jira: none

Change-Id: I4387f425f60e6a53a53cf68addb1ab2d6f8f8901
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX:add resume button

JIRA:github:2860
Change-Id: I39035d929876ab3c84c5f5c3494376967300938c

* FIX: CLI: fix an arrange issue when duplicate failed

restore the wipe_tower position to original when duplicate fail

JIRA: MAK-2638
Change-Id: I355056f1d87648cc1f6aafa15a98ff569359b44f

* FIX: fix printer list without nozzle such as 0.35 or 0.75

Jira: 5409

Change-Id: I1a258fd10bcc03e297b791256880f2518d602905

* ENH:The first object should locate at plate center

Jira: STUDIO-6023
Change-Id: If4284136fe63ca576463445f3ab16b6e18ead30f

* FIX: Colored filament is not matched against.

github: #2190
Colored filament is not matched against the same color in AMS slot.

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Id4588fc9c8115a46881e2f5d198d79fe831f4371

* FIX: Revert "[STUDIO-4284] not set max height of liveview window"

This reverts commit 0312aee4d9b92e23884be8802da9801ff3b9fe93.

Reason for revert: STUDIO-5653
Jira: STUDIO-5653

Change-Id: If9d5f3e63968a0a54f9af1a2dae8f95f7f1f3f80

* ENH:modify file name rules when export stl

Jira: STUDIO-6091
Change-Id: Ic27e4e341cc09099e98a5eab7dfd48416f2922ae

* FIX: Flow calibration stage incorrect when switching printers

Jira: 6093
Change-Id: I41f1ac10ac9422ac808eab3254f32ea14a0d3b76

* FIX: UserGuide Can not Click When Computer User name has chinese

JIRA: None
Change-Id: If50baa8c6a13eb501918fd5cdaf0ea3da7c788ef
(cherry picked from commit 4e5ccc9f2de5ac429af6541c6a8bd412848801d0)

* ENH: Little Optimize JS Code Execute Progress

JIRA: STUDIO-5792

Change-Id: I12b03d8b968a9dd8dfce9eb3ef925fa8768e2046
(cherry picked from commit 2bf861092c9e306e1311eda8ac36fd981e73b6c2)

* FIX: Delete Test Code

JIRA: NONE
Change-Id: I838a348edb22e09d2b1d5c41600c6fade535d184
(cherry picked from commit 51e664da0209ae8a3de5cbf30a72505c0b5bd028)

* FIX: the object list order changed after clone

github: 2798
Change-Id: I10a05ee7e00b05cb1255cfb708876ed784cabac7

* ENH: add alias for custom Filament preset

Jira: XXXX

Change-Id: I2fecc8b2bdb63618155e3d21f9db374a6119e416

* FIX: [5779] fix show alias logic when load preset

Jira: 5779

Change-Id: I4fefe3c1ffbca9bd8296f1b3fdd5de48c6a36a28

* ENH: Optimize the logic for deleting third-party printers

Mark the Filament and Process presets to be deleted first
then delete the child presets first and then the parent presets.

Jira: none

Change-Id: I100b873baae96c6ba27af258e708e6ab8e6ee4ab

* ENH:default selection of virtual tray

jira:[for def selected]

Change-Id: I0661f179f8e4bcac33ae12fbbeaeaf95c5b7c110

* ENH:add protection when no thumbnail data

jira:[for protection]

Change-Id: I3834a5ffde11ff54567dd854271184f06f94547f

* FIX:fixed issue with chinese path

jira:[Fixed the issue of failed loading of configuration files under Chinese path]

Change-Id: I9badd8fc158fcf49f46411ac4e5f72d58823eeb2

* NEW:add new msg notification for hms

jira:[STUDIO-6154]

Change-Id: If1aa33030a99550d0c859d594a2711aea4dcea4a

* NEW:using new humidity display ui

jira:[STUDIO-5967]

Change-Id: I13be4212e6b97f646d21e0af64cbc5006753fdeb

* NEW:Dye materials above grade 10 with shortcut keys

JIRA:STUDIO-5827
Change-Id: I002ecdd19167fb36772e4b4e9e2f7760e21079db

* NEW:update automatically when inserting materials

JIRA: STUDIO-6157
Change-Id: I2cefbb7b330ca4f13e841066548992b3fb3740f1

* FIX: check sdcard exists for file connect

Change-Id: I69199a29294c04d1fe46ee66682085b1f1d1d049
Jira: none

* FIX: not load printer files when it's busy

Change-Id: Ie5a58befcfc0d7fa0d4e587e8429c0b1bfeff72a
Jira: STUDIO-6105

* ENH: save video ctrl size to reduce layout change

Change-Id: I470f29d7f029d304c9badeeb8f94bed281080b29
Jira: STUDIO-6141

* ENH: stop liveview track record

Change-Id: Id4f236b239740bd919f2aa2f2892c1e63ce233bd
Jira: STUDIO-6131

* FIX: thread safe of http extra headers

Change-Id: I6ffa424be7ccb6abd78a66cc8be535f038b05469
Jira: none

* optimize MeshBoolean

* FIX: parse printer_model_id from 3mf

Change-Id: Ib149c986885ee6412898f1f51dd5a4aaad0a596d
Jira: none

* ENH: find grid empty cells for fill bed if the item is too small

jira: STUDIO-6015
Change-Id: I4e5eafdadd77482a27a8903d32bb83325283088d
(cherry picked from commit 8df4da4a863cdc42c790a9d5da37f8633423e406)

* ENH: always return product for firmware and lifycycle

JIRA: STUDIO-6282

Change-Id: I1f942babdcb7afee2c9a9076ac539063c5406ad7
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH:STL tracking restricted area

jira:[STUDIO-6155]

Change-Id: I289c8b8aa8f62f0e5cc7004fb60437aa3337ca85

* NEW:add nozzle settings

jira:[STUDIO-6226]

Change-Id: I0db8333e5b5c8195add111fdcfa2e92387997815

* ENH:display the current humidity of AMS

jira:[ENH]

Change-Id: I98bdd6d70cd173ed640f0d96692fcb6836416bb8

* FIX: [6123] create printer for exist printer can not into next page

Jira: 6123

Change-Id: I338ac0fde4f69b6f312f20e53851d91339e8156f

* ENH: Display value of flushing volumes

JIRA:STUDIO-6139

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I273fb22b0d378a839c34e9e0e9c414f0e5134799

* FIX: show printer file path & title

Change-Id: Ie5eff188c3039deeca5da96b54407194bf8910a0
Jira: STUDIO-6268

* FIX: liveview error message

Change-Id: Ie437e07916d7b6feae2dbcfa166c4e73bdcf31a1
Jira: STUDIO-6107

* FIX: file proto error message

Change-Id: I2c4117961c615e424780fb3830441e6a93c50bcc
Jira: none

* ENH: earse sensitive fields when export configs

Jira: None

Change-Id: Id9ca0637240b80773f39d2308192f8c78a5de3c6

* fix build errors

* FIX: unexpected layers in multi color print

github: 3131
Change-Id: I2a42e3bbd2247fbc0957022e1baae43c9375a8fb

* ENH: Add "New" button for PA cali

Jira: XXXX
Change-Id: Ic39f2508f2f9d390c2b9246fb3d3e281cde9b064

* NEW:add printer compatible check from sd card view

jira:[STUDIO-5969]

Change-Id: I86d10ebe2e9bc77e6350e26aeed6b4f0f9fdcecb

* NEW:enable loadl/unload when printing pause

jira:[STUDIO-5968]

Change-Id: Ieb3ef2423378e44b81a61a2b18c16f68aa335922

* FIX:fixed HMS message not cleared

jira:[STUDIO-6296]

Change-Id: Ic7692ce337fd00ece4ab8d65214a8c406f8543f8

* ENH:error code setting default value

jira:[for error code]

Change-Id: Ica61344c8217d41adb2947a40f633dc8d19a197a

* ENH:display conflict information

jira:[STUDIO-6297]

Change-Id: Ie1501323a7e8d9ceb4060ae6c0b4eab20f8b088a

* ENH: refresh printer file list

Change-Id: Ic86942d2b0b2e8383ef0f06311164aad59e837ad
Github: 3383

* FIX: Unnecessary prime tower error prompts

Custom gcode on other plate causes unnecessary prime tower error prompts
Jira: 6305

Change-Id: If499659b364a6b6898db1587b7b2aeed03758667

* FIX:multi colour displayed as gradient color on AMS

JIRA:5925
Change-Id: Ic7a925dda2e3bde066ba40ba27002569040f9518

* NEW:Color painting shortcut keys 10~16

JIRA:STUDIO-6238
Change-Id: I3cce838fad5e73d41f109b32f2e563716fd5b0da

* ENH: Print when unnamed project, task named as object names

github: #2286

Change-Id: I9be3fd25d16a00b78326ec43db9afcf3645d90f1

* ENH:reset user access code

jira:[for lan mode]

Change-Id: I2d0ed48411d683c3f20b2febc0d54747287870a7

* FIX:fixed crash when selecting new printer

jira:[fix]

Change-Id: I6a81186e822eb6bf6ce7aa70561dfae35d4de0e7

* FIX: not show printer's camera error when updating

Jira: STUDIO-6232
Change-Id: I985d75b3772849e07100799c4f13db5d4cbafde3

* FIX: clear error after reload file list ok

Change-Id: I5d5e4f2870302b198d3a9d40603a6fa8010b7e76
Jira: STUDIO-6306

* ENH: custom filament sync with printer

1. prompt sync user presets when create custom filament
2. Fix the issue of not displaying printers when creating custom Filaments based on presets when selecting PLA Aero Type.
3. Optimizing the traversal logic during AMS Setting Pop up reduces time complexity and allows for quick pop ups. Additionally, using nozzle calibers for retrieval and repairing custom materials may result in inaccurate retrieval.
4. Implement synchronization logic with the printer
	-a. Received slot information, reset the slot when the "filament_id" in the information does not exist in Studio
	-b. Received slot information, the nozzle temperature in the information is different from the preset nozzle temperature in Studio, reset the current temperature.

Jira: none

Change-Id: I511dc82563ec77a341839671d398607048ce1985
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* NEW: add api of "toggle_selected_volume_visibility"

Jira: STUDIO-6166
Change-Id: I77eb988a3ea43cd37d50888d1753b973795d8b36

* FIX: No data in the drop-down menu of the AMS settings page

Jira: 6342 6343

Change-Id: I6938fb4a7ae2816a4675d8d739622e25f219f469

* fix build error

* FIX: label wrap all & ping test for liveview

Change-Id: I7767ed0740e20bb578b6ef9f5e9873c8c79d172a
Jira: STUDIO-5821

* ENH: reuse controls in param Field

Change-Id: I42bb4da01e1e9b64c343b7fda4357a9553cf8684
Jira: STUDIO-5983

* FIX: use wide path to create camera process

Change-Id: I5de31fce0dea14df9a0ad363f3cb16dc40c275bc
Jira: STUDIO-4946

* ENH: optimize the get_tool_order func

Use Dp to refine performance

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I38b0c875e4deee9d9fbe926087fb5b2e274f8f90
(cherry picked from commit 9b7b66dc7a1f5e3efa318227ae7694bec5ec1216)

* Fix build errors

* ENH: add customize other layers print sequence

Jira: 6338
Change-Id: Ic14b2671ade37ab37583b81c5b509447b6c0d8f8

* ENH: [#3236] Unsaved changes to interface copy adjustment

github: #3236

Change-Id: I53931859bdcdfedfa9f63f6239d0fd2fd6d2766c

* NEW: support to adjust other layers print sequence

Jira: 6338

Change-Id: I5e6aef71aa9e6e97c1859aaaeb9ada5f1340414a

* FIX: imgui support toolbar window text wrapping issue

jira: STUDIO-5821

Change-Id: I57ee984baffbb2f00a7ecc5d5c8061074b06aff6

* FIX: updater: fix force upgrade logic

JIRA: STUDIO-6393
Change-Id: I46c51e09e7390e5ab0de40215911aac9635ab476
(cherry picked from commit 673ba6ff4ebda039d71dcbfdaa28c1252f5b8821)

* FIX:final step of slicing is to execute post-processing script

JIRA: STUDIO-5828
Change-Id: I8c33e2a66ac5c692244c778586040663b7b54bd7

* NEW:enable 3dMouse detect in .conf

JIRA: 5830
Change-Id: I8731e0244d2f551130c84bcfbbb46967ae6b19cd

* FIX:finish init "return" icon and hide it

Jira: STUDIO-6350
Change-Id: I0f1efd4a64ea204daeac7de822602ef6dfa3e4a5

* FIX: seq_print: fix an invalid warning caused by sinking

github: https://github.com/bambulab/BambuStudio/issues/3007
Change-Id: I1111910f2c625d5a871ea01b37dbfa7b04a849ee
(cherry picked from commit a3db95bb0940d5afe07ef0bb07113cc2acd7cd0a)

* ENH: plater: optimize the loading time of 3mf with large objects

JIRA: STUDIO-6021
Change-Id: Ia97f681041bb553c5c4b5b1d9109e5e5c42daf6b

* FIX:Fixed HMS issue

jira:[STUDIO-6344 STUDIO-6310 STUDIO-6356  STUDIO-6348]

Change-Id: I9d6660e7c349775004b69bfe41b651bfa8b359b7

* ENH:handling dirty data after nozzle settings

jira:[STUDIO-6332]

Change-Id: I00d6d1324376f973ec3cf9f2154ae83ef3302705

* ENH: use Bambu_StartStreamEx for agora tunnel

Change-Id: I5c28dea49d267bf7ff967d0982dd83555899c8c4
Jira: none

* FIX: use safe language code for http

Change-Id: Id1f4927308350ee35b891a5352cbf1e2d0c2577e
Github: 3655

* FIX: add cli_id, cli_ver to bambu url

Change-Id: Ic527d1497c6dee0c723d7b4629f0be825a8f7545
Jira: none

* FIX: not throw when _add_auxiliary_dir_to_archive

Change-Id: Idf54bbbd0ef557ec5e1a8e51ed669a1eb1fb4261
Jira: STUDIO-6339

* NEW: vase mode can be applied to one plate

jira: STUDIO-5838

Change-Id: Ifb315f7d79b570aeb7ee31d3495b4d465e3af0c6

* fix crashes

* ENH: update overhang degree method on calssic mode

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I90f6e4c2ef618fdaef00bdaf1ca309893f484c1e

* FIX: auto-arranging unprintable items may crash

github: #3676
Change-Id: I68eb87c73ad2c0c269f60e661136fd1a72ee5e2f
(cherry picked from commit 7e3c57eaa811424935fe8db6a4e77dd142ee2b58)

* FIX: use old slicer_uuid for client_id

Change-Id: I6c45e83213d613fc28eef04115f9cfb19dea703e
Jira: none

* ci: update network module based on commit 542ced8

Change-Id: I3ad5032cc56a99d1c3a687b2891d147b13af066d

* NEW:Support OLTP file

Jira: STUDIO-6421
Change-Id: I58bc94e978e6d2dd136ea370fb01f6ec80e14b23

* ENH: detect in_head_wrap_zone more precisly

1.Union first layer convex hull with object's bbox to detect whether
model enter head_wrap_detect_zone

jira:NEW

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I11f26967d7421f41e9c824e62794c96591e6ae71

* FIX: fix the plate cannot be searched

JIRA: STUDIO-6283

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I88206c91ea24c6a41a0bd06f05f0f3c2fdc58a36

* NEW:hms error code

JIRA: STUDIO-6302
Change-Id: Ia33511f4c636c8ada39ed5a4e52d9b185da9c00b

* FIX:Color adaptation for numpad

JIRA:STUDIO-6410
Change-Id: If6e49638af8616fd349367073883592e6bebb503

* FIX: error overhang degree mapping

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ifa24aa0cad0a06b09ee62a8be8781188a765d1d0

* FIX:display correct humidity

jira:[fix]

Change-Id: I27aae54a8355911b5d88ed45be320d3c9178081c

* ENH:Hide confirmation button when unable to send print

jira:[STUDIO-6355, STUDIO-6332]

Change-Id: I8f9c0edea4d5ee70e9fef1e9d42838d598dc32c4

* NEW: new type for Custom Filament

Type: "PE", "PP", "EVA", "PHA", "BVOH", "PE-CF", "PP-CF", "PP-GF"

Github: 3205 3169 3127

Change-Id: I8a30dd806c35460d9dae0f808190ce013b125d51
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX:fixed filament settings page display error in French

jira:[STUDIO-5821]

Change-Id: I6cc6dd9b83c7570688c2adc55efe2407cbcb4390

* FIX:fixed thumbnail not updating when using multiple plates

jira:[STUDIO-6313]

Change-Id: If49daa5b38b9a580ae226ff00a1e0085d167c15c

* FIX: Color Bleed in slicer

github: 3681 jira: 6450
Change-Id: Icb6274f7ddb238c238c133b95167310b1af905f7

* ci: update network module based on commit 8befd46

Change-Id: I3a6420684f106bdde5897a50d27dfec69e0aa37f

* ci: update network module based on commit e411785

Change-Id: I3a9c7bfa5ac5a942f339ad0194a24d9170847371

* FIX:reload paint after background process apply

Jira: STUDIO-6493
Change-Id: I9a1986152f05163f236f58bb24210b690ca3d562

* FIX: use object name of plate when send task in untitled project

Jira: 6430

Change-Id: I78ec811fab1cf028c0d5f81ac7738abdbeb6145f

* FIX: auto arranging spacing can't be adjusted correctly

jira: none
Change-Id: Ibddfe85aab9f3fad6a1612e8db437e52c40e20a3
(cherry picked from commit 136bca01f45e62042bd699a9a0a9f6d13519712c)

* FIX: fix change nozzle temp in Studio but printer not change

Jira: 6510

Change-Id: Ia0e1ac586ff41ddbabdac0845415e70774299387
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH:rename some img files

jira:[STUDIO-6512]

Change-Id: I69872533cccda37b94384bc219cc35c5dec9310b

* ENH:PEI bed is no longer unchecked by default

jira:[STUDIO-6508]

Change-Id: Ic9ca99860d46c27ca4c36a735df3f57fe71417df

* FIX:fix the load status of vtray

jira:[STUDIO-6435]

Change-Id: I8cafcc0b6caf19492aae6c153fb509f470dc7e83

* FIX: Supports automatic calibration of textured PEI

jira: 6504
Change-Id: I3234fb555b9bf0ea97e73387651874733e761ee7

* ENH:add tooltip for search item

JIRA: STUDIO-6459

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I7602a32159d21de8f37ea0208dd6a9f59b90dcce

* ENH: CLI: add version check logic

add option allow_newer_file

Change-Id: I8e8e4a45f77ebdd6dae6189841e4a9952e95ca82

* ci: update build version to 01.09.00.52

Change-Id: Id6e32b5afcf5eaabce9c0c7ab2c422e97b00e632

* NEW: switch to object panel if double click on object

jira: none

switch to object panel if double click on object,
otherwise switch to global panel if double click on background.

Change-Id: I6e54d7957aa19f1ebb1f993bc38125bbee8a1c98
(cherry picked from commit cc2e07bc9489c76a7d767acff0406c83c996504c)

* FIX:fixed loading img resource failure

jira:[for fix img load]

Change-Id: Ifb26b2ca23029abeda000322bf2ef7d2b3cda3b4

* FIX: Project Title can Click

JIRA: none
Change-Id: I614c60e76efe04875e36e3a8ef7a10acd3ef9ecf

* FIX:Prioritize selecting filament with smaller serial numbers in AMS

JIRA: 5909
Change-Id: If3030d4dd8d59af36bc1ae1801be1b89b0027a71

* NEW:material adaptation in select machine dialog

JIRA:xxxx
Change-Id: I625eac75c88cad804dd3741f750c5ea68a975421

* FIX:mac ams setting display

JIRA: STUDIO-6228\6409
Change-Id: I432a3aa96601a8e223b5949bc0ad5234c1374dca

* FIX: Image Scale Mode and Online Display

JIRA: none
Change-Id: I528f16e93b82748d86dc93e2dd3d85f317babaa7

* FIX: sequential_print_clearance_valid not working

not working  correctly with short objects

jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)

* NEW: add nozzle_height to machine profile and do not detect conflict

Jira: request from 1.9

1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.

Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)

* FIX: sequential_print_clearance_valid not working

not working  correctly with short objects

jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)

* FIX: [6510] set nozzle temp incorrectly when popup AMS Setting

Change-Id: I898f0b94794a3d67017b1917ce196c4019f5eb4a

* FIX: auto-calculate flushing volumes

JIRA: STUDIO-6547
FIX the first modification of consumable color after synchronizing filaments, without automatically calculating the flushing volumes

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I2bc76a29afde5241d100cc42a5161db0f9b901c4

* FIX: custom layer sequence from End to End comboBox display issue

jira: new

Change-Id: I413cd5896d7e921f2c7c03b91b08788fefb9a4f3

* FIX:fix the v tray's filament unload logic

jira:[STUDIO-6627]

Change-Id: I34420bc4d1d27b6b36defb9852bba2eaf77fdcf2

* NEW:reducing purge through retracting filament

1.reducing purge through retracting filament.Currently only
applicable to X&P series

github: PR#3100

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1

* FIX: wrong role cache in wipe tower

1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588

* Fix plate settng icon

* NEW:revert hms error code

Change-Id: Ib5cc8bb8b8ced0f70d5bbe4751a1f97258218c6f

* FIX: calibration page button broken display issue

jira: STUDIO-3913

Change-Id: I2fd488e829d898b7d81d09db814ed6518f0c54a8

* FIX: do not check spiral vase mode config if an object is loaded

jira: STUDIO-6514

Change-Id: Ib44ec8322ff178b5765f7fe94b588aa38339691d

* FIX: implicitly set spiral vase config for objects just loading

jira: 6514

Change-Id: I04bb2b1abeb62d4dfff4e526b723b1cf1bd5fd7f

* FIX: filling bed fails if the bed is already full

JIRA: STUDIO-6490

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I71b5a01a95cdffef7c0750e6347fa8911dcd781d

* ci: update network module based on commit 868f5d7

Change-Id: I5584e4441e1f2ab400addaa87ee8013927fb9e15

* FIX: add query_real_volume_idx_from_other_view api

Jira: STUDIO-6545
Change-Id: Ib8216981c5d2945a0221a5caa1fbc14ed74e930b

* FIX: Can't edit text

github: 3750
Change-Id: I1caecaa968e60cadcdbe9f7aa67cba141bb88230

* FIX: Slicer creates invalid color pattern

github: 3749
Change-Id: I3fd74a9ca59b75873fcbca4437e4858c749ee853

* ENH: hide tuck did

Change-Id: I9021d3f51c9a73bc9208b479f96b1ddbe7a2f8f8
Jira: none

* FIX: PrinterFileSystem: retry connect on user action

Change-Id: I3e8902298385ed2e5906fd15d1817b6e33522a76
Jira: STUDIO-6354

* FIX: Remove user ID and other information

Jira: XXXX

Change-Id: Ia63ec88a335d88fd40a29952abe6d40d8991efee

* ENH: refine retraction before cut

1. Add filament retraction before cut control

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifcb087c9791c0461b793ef811b21ebd4c007d880

* FIX: enable resumed read only Field

Change-Id: Id09e671932458699c020f0a061d8cfc11a6958ab
Jira: STUDIO-6641

* ENH: add precise_z_height

jira: none
Change-Id: Idb9fcf0063e773f1531a49961478460b91ded10f

* ENH: modify the multi-material segmentation and voronoi

This patch is cherry pick from Prusa, thanks to Prusa

Rework multi-material segmentation to work directly on the Voronoi diagram without creating a copy of it.

Previous algorithms assume that they can get an invalid Voronoi diagram. Because of that, during the multi-material segmentation, a copy of the Voronoi diagram was created, and there were several attempts to fix missing vertices and edges. But as it shows, this wasn't a good enough approach and sometimes led to several issues like bleeding layers.

After generalization, our approach for detection and repairs of invalid Voronoi diagrams from Arachne, we could assume that multi-material segmentation gets non-invalid Voronoi diagrams.
With this assumption, we reimplement multi-materials segmentation to work directly on the Voronoi diagram. That should make multi-material segmentation more stable.

So, this should fix several issues like bleeding layers. Also, memory consumption should decrease by a lot. Also, there should be some speedup of multi-materials segmentation.

Jira: none
Change-Id: I72aa6e1f9634d9ee8759aa469a0b39a36ace62f5

* FIX: infill speed not work on region level

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie3d17c5e3cbf91a8854e3b4cd80babeb2b1bd121

* ENH: support saving PA calibration results for P series

Jira: none

Change-Id: I9402b8bcce7b48a63d0e97e0708080701d065e7a

* ENH: refine long retraction ui

1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372

* FIX:height range cut = volume_count * 2

Jira: none
Change-Id: I539c2f9cda7985b4b3c318ca8aa1eb7c52fdce82

* FIX: auto arranging gets wrong object height

obj->bounding_box().size() is not the real object size if the object has been rotated.

jira: STUDIO-5999
Change-Id: I6553d4c990696efd674e3e57063802127d5d5282
(cherry picked from commit 479ea9fb02f55d24f27c94633f3d852bd5c62c83)

* ENH: seperate support weight from model

jira:NEW

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I86bb34941269bf1aa29436a94ebbdff675497e85

* ENH: add support for gcodeviewer statistics

jira: new

Change-Id: Ied6d61e8c48ac82daf16579d9caed9723cf8e29d

* FIX: invalid support weight per extruder

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0e4b857c9c758ab7c54ef13aee1bf596f975640b

* FIX: do not need reset bed_type for pa calibration

jira: none
Change-Id: I411064cf14d94a9bd1f0f6668ee23aa10d372f3d

* FIX: P1P/S can not modify the k value in old version

jira: 6745
Change-Id: I5c9dffe8e998213e6af6e1d01a6b0ae82521e8db

* Add rotation support for 3D Honeycomb
Ported from BS

* ENH: add default params for long retraction

1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe

* misc fixes

* ENH: remove long retraction warning

jira:NEW

Signed-off-by: tao wang <tao.wang@bambulab.com>
Change-Id: If60236b3282991a2d94df7d125427cff86899536

* avoid zero length path

* FIX: check recommended nozzle temperature

Jira: XXXX

Change-Id: I4dbb274cf27ef9c6d20a8479b29af1069652b2bc

* FIX: fix not popping up a prompt when the temperature is set to 0

Jira: 6497

Change-Id: I6498fc6962e7da376d4c652dab0a99a161932eef
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: When creating a custom Filament, use the system Filament type.

Jira: 6301

Change-Id: I1bfddcf43d2ebaebca4eb494d1f64165c3d59e9e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: seam and unretarct pos error on smooth vase
casused by invalid path of smooth vase mode

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib597e8c05760886aae2c42e42e8d46e82b844578

* FIX: unable to map if filament not used in model

1.Fix filament can not map if it's not used in model body

jira:NEW

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788

* NEW:Update data only on device pages

jira:[STUDIO-6776]

Change-Id: I33b0c9f35c1dc6df2db3b6bd4f446f46b31ecf6c

* set(SLIC3R_VERSION "01.09.00.70")

* update BBL machine profile 01.09.00.04

* scarf clip start and end
Ported from BambuStudio

* fix linux build error

---------

Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: Leon Fisher-Skipper <47602359+LeonFisherSkipper@users.noreply.github.com>
Co-authored-by: Lukas Matena <lukasmatena@seznam.cz>
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com>
2024-04-14 22:07:00 +08:00
SoftFever
ba414bb74a
Wrong bridge detection result (FOR TESTING ONLY) (#4678)
Fixed an issue that top surface was treated as internal bridge
2024-04-07 22:43:00 +08:00
SoftFever
dcb8d09af6
Add overhang threshold for scarf joint seam (#4725)
add overhang threshold for scarf joint seam
2024-03-27 22:02:20 +08:00
SoftFever
2841476e86 Revert "Wrong bridge detection result (#4651)"
This reverts commit f626e4dd27.
2024-03-23 20:33:35 +08:00
SoftFever
f626e4dd27
Wrong bridge detection result (#4651)
process_external_surfaces before discover_horizontal_shells
2024-03-23 13:19:23 +08:00
Ioannis Giannakas
143087bb2a
Revert automatic application of reduced internal bridge filtering for lightning infill (#4639) 2024-03-23 10:11:13 +08:00
SoftFever
1471ac4204
Fix an issue that only 1 bottom/top will be generated when ensure vertical thickness is set to None (#4504) 2024-03-16 00:24:57 +08:00
SoftFever
cab5fe715d Handle parameter name change properly.
Fix build break and keep compatibility to existing user preset after #4444 changes
2024-03-13 21:57:41 +08:00
SoftFever
879c3924c9
Optimize ensure vertical feature's UX (#4402)
* Change ensure_vertical_shell_thickness to enum value type. Allow users to turn off this feature completely

* add warning to the tooltip for None option
2024-03-10 21:16:02 +08:00
SoftFever
a4bf3dabb4
Scarf joint seam enhancement: conditional scarf joint and slowdown for scarf joint only (#4317)
* Allow apply scarf joint seams to perimeters without sharp corners only

* 1. Fix an error when detect whether a loop is smooth
2. Expose scarf_angle_threshold to UI

* fix linux build error

* minor code changes

* Support slowdown speed for scarf joint only

* update tips

* improve the logic a bit

* Fixed a bug that scarf speed may not respected for overhangs

* Add a new scarf flow ratio option
2024-03-08 23:41:59 +08:00
Noisyfox
924a2b4551
Seam: use scarf joint to minimize seam visiblity (#3839)
* Remember z of previous layer

* Support travel to middle of the layer z

* Support sloped extrusion

* Implement sloped seam

* Reduce extra movements

* Don't clip loop if sloped seam is enabled

* Fix wipe

* Ensure `slope_max_segment_length`

* Add options

* Limit slope length to perimeter length

* Fix slope segmentation

* Rename the option to scarf joint seam

* Don't modify the slope option when turning on spiral vase

* Add a few suggestions when turnning on scarf joint

* Add option to add scarf joint to inner walls

* Apply seam gap at the end of the slope

* Add option to explicitly use the entire loop as scarf length

* Fix layer number

* Increase default scarf length to 20mm

* Better way of storing the global scarf state

* Better vase mode layer height recognition

* Move id should exclude seams

* Fix slope height with independent support layer height

* Fix linux build

* Allow controlling the scarf with modifier

* Scarf start height default to 0

* Allow enable scarf seam on contour only

* Fix type error

* Move the creation of sloped loop into ExtrusionEntity.cpp

* Fix error "vector too long"

* Detect seams properly

* The correct way of calculating the rate limit

* The correct way of calculating the rate limit

(cherry picked from commit 05961f7c98)

* Add pressure equalizer in print by object mode

* Remove the settings recommendation as it varies a lot depends on printer & filament

* Add a beta suffix

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-03-02 23:25:02 +08:00
SoftFever
2c279c5648
Add direct adaptive bed mesh support (#4212)
* Add direct adaptive bed mesh support

* fix Linux build error

* update tooltip
2024-02-24 20:44:00 +08:00
Noisyfox
e4255b3c01
Allow specify wall directions (#4156)
* Add wall direction option

* Force wall direction if specified

* Format

* Rename default to auto
2024-02-23 20:45:56 +08:00
Aidan
951fc8e98a
A *lot* of import fixes for flatpak (#3909)
* A *lot* of import fixes for flatpak

Aside, thank you @hadess for the majority of these fixes. You are the
base point for a lot of issues fixed during the creation of this
flatpak.

* Use slic3r::load_string_file

Boost 1.84 removed `boost::fs::load_string_file` so use the func located
in Utils.hpp
2024-01-31 11:23:29 +00:00
Noisyfox
73ab032e82
Fix some rotation-related issues (#3890)
* Fix issue with max_z after rotation

* Don't use `object.bounding_box()`, use `bounding_box_exact()` instead.

* Fix auto-orient

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-01-30 11:45:14 +00:00