Alessandro Ranellucci
54e1d934a7
Fixed regression with support material
2012-04-30 23:36:49 +02:00
Alessandro Ranellucci
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
4bc49dcc5b
Fixed regression throwing fatal error when using --duplicate-grid
2012-04-29 19:01:18 +02:00
Alessandro Ranellucci
ed4a5739f6
Multiple objects autoplating (--merge, from command line only)
2012-04-29 12:51:20 +02:00
Alessandro Ranellucci
285caffa9c
Omit G92 if No Extrusion
2012-04-16 20:06:53 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
356e750cf4
Bugfix: support material was oversimplifying the first outer perimeter. #314
2012-04-16 13:48:55 +02:00
Alessandro Ranellucci
0faebad4da
Make new support material algorithm effective
2012-04-14 19:47:33 +02:00
Alessandro Ranellucci
74c02e7aed
added skirt to print size calculation for --duplicate
...
Conflicts:
lib/Slic3r/Print.pm
2012-04-11 20:44:09 +02:00
Michael Moon
757f8a2404
move duplicate stuff around a bit
2012-04-12 03:30:15 +10:00
Alessandro Ranellucci
e58ed195fd
New --bed-size option
2012-04-11 16:30:58 +02:00
Alessandro Ranellucci
4ae551a424
Ditch --duplicate-x and --duplicate-y, add --duplicate-grid
2012-04-11 15:58:09 +02:00
Alessandro Ranellucci
a8adff53ca
New implementation of support material
2012-04-09 22:06:30 +02:00
Alessandro Ranellucci
82a16ed8ee
Merge branch 'triffid-duplicate'
2012-04-09 15:14:40 +02:00
Michael Moon
f2edfd1a76
initial implementation of algorithm for #249
...
fix typo that put things in the wrong position
use int() builtin instead of POSIX::floor()
fix typo
use alternate method of creating local routines
remove aliases for new duplicate option
use coderefs for linear interpolate function, make binary insertion sort inline
add \n at end of die message regarding too many objects for print area
fix case where no duplication is done
fix whitespace according to slic3r coding style
assume 200x200 bed area if center is 0,0
Some cleanup to the autoarrange duplication logic
2012-04-09 15:14:07 +02:00
Alessandro Ranellucci
64e669d893
Refactored parallelization code. #154
2012-04-09 13:53:13 +02:00
Alessandro Ranellucci
68b48fa807
Multithreaded mesh processing. #154
2012-04-09 12:29:47 +02:00
Alessandro Ranellucci
43ebaa9d94
Don't slow down travel moves. #293
2012-04-03 14:22:18 +02:00
Alessandro Ranellucci
13e573a8e4
Only output M109 if there's none in user-supplied start G-code
2012-04-03 12:50:06 +02:00
Alessandro Ranellucci
0afb5ad9dd
Bugfix: some holes were filled. #291
2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
d791315b4a
Bugfix: fatal error when generating skirt for layers having only two-point thin walls. #295
2012-03-31 18:32:53 +02:00
Alessandro Ranellucci
1355833cbf
Use M109 for Makerbot bed control. #294
2012-03-31 18:24:12 +02:00
Alessandro Ranellucci
2aa786c95f
Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect)
2012-03-26 19:47:21 +02:00
Alessandro Ranellucci
69942d2076
Bugfix: certain values of first layer height ratio caused slicing errors
2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
d0807aa807
Allow to use config options in start/end G-code
2012-03-03 23:29:08 +01:00
Alessandro Ranellucci
f2032686da
Ensure fan is turned off at start if disable_fan_first_layers > 0
2012-03-03 23:18:02 +01:00
Michael Moon
35e7877437
bed temperature handling. TODO: gui elements
2012-03-03 23:08:50 +01:00
Alessandro Ranellucci
2c16509e8a
Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237
2012-03-03 22:28:44 +01:00
Alessandro Ranellucci
06c22c9db3
New --fan-always-on option. #241 #110
2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
c7006fed26
Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245
2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
b5cba48e55
Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot
2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
f0e434f8c1
Fix typo in previous commit and in config options. #234
2012-02-28 22:04:48 +01:00
Alessandro Ranellucci
0520d1645b
Bugfix: retraction wasn't triggered when moving between copies. #232
2012-02-28 21:55:32 +01:00
Alessandro Ranellucci
79bc2240fb
Use first layer temperature for M109 too
2012-02-26 15:09:28 +01:00
Alessandro Ranellucci
dccd7d19a9
First layer temperature. #134
2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
170d29a789
New --cooling option and checkbox to enable/disable fan and cooling control
2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
70e69be60a
Bugfix: support material was generated under most bridges
2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
1d0a852679
Cooling and fan control. #110
2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
f4fde54bf3
Add extrusion multiplier to gcode comments. #222
2012-02-25 19:24:46 +01:00
Alessandro Ranellucci
848bf91244
Multithreaded support material generation
2012-02-25 16:51:08 +01:00
Alessandro Ranellucci
cc695c6c22
Support material: refactoring
2012-02-25 16:23:41 +01:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
94e673e050
Backwards compatibility for people using relative E distances on RepRap firmwares
2012-02-24 23:12:16 +01:00
Alessandro Ranellucci
555c23069d
New --post-process option. Includes some cleaning of the STDOUT messages
2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
ae35df716f
Little refactoring, new TriangleMesh->align_to_origin method
2012-02-20 11:47:21 +01:00
Alessandro Ranellucci
615bcb27dd
New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158
2012-02-20 11:44:30 +01:00
Alessandro Ranellucci
94a2585b97
Dual extruder for support material
2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
e0e2023a5a
Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179
2012-02-19 10:48:58 +01:00
