bubnikv
d8be976356
The "controller" tab and the settings of the USB/serial connection was
...
made configurable. Now one may hide the "controller" tab and the USB/serial
connection configuration from the preferences. This is useful for someone,
who never connects his printer to the computer by a cable.
2016-05-16 23:57:53 +02:00
Alessandro Ranellucci
f006e66549
Refactored calls to Wx::Bitmap->new
2016-04-09 19:10:57 +02:00
Alessandro Ranellucci
8138fbf349
New --retract-lift-above and --retract-lift-below options. #763 #3057
2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
1dc5f5531e
If --save is called without any other config option, export full default settings. #2110
2015-06-02 22:05:53 +02:00
Alessandro Ranellucci
57e6a7becd
Fix --help output: --retract-layer-change is disabled by default. #2846
2015-05-25 00:35:57 +02:00
Alessandro Ranellucci
6185f45815
Hopefully fix all problems with non-ASCII paths on Windows
2015-03-09 15:17:50 +01:00
Alessandro Ranellucci
66824fd17e
Set STDOUT to UTF-8
2015-03-08 00:54:38 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
43f4806142
Load files into the GUI when supplying them as command line arguments along with the --gui switch. #2644
2015-02-14 12:54:06 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
059b00a829
New --before-layer-change option and new layer_z placeholder. #2602
2015-01-30 20:08:00 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
306bc02e29
Fix --help, wrong default were displayed for a couple options. #2541
2015-01-15 17:49:22 +01:00
adius
4b38cffc60
Fix typo in documentation
2015-01-13 00:19:01 +01:00
Alessandro Ranellucci
47e4e8bb66
Option to use volumetric E values. #1746
2015-01-05 19:39:10 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
7a7d00c8d6
Rename solid_fill_pattern to external_fill_pattern and clarify tooltip
2014-11-27 00:38:05 +01:00
Alessandro Ranellucci
ff9b53260d
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
2014-11-24 18:22:39 +01:00
Alessandro Ranellucci
989ec5cf4d
Fixes to UTF-8 handling in file paths
2014-11-22 21:55:45 +01:00
Alessandro Ranellucci
c2e710d092
Removed --g0
2014-10-21 21:41:11 +02:00
Alessandro Ranellucci
0d2dcbc85b
Typo in command line help (wrong default for default_acceleration). #2283
2014-09-24 22:25:23 +02:00
Alessandro Ranellucci
73b3c06361
Ported more things to XS
2014-09-21 10:51:36 +02:00
Alessandro Ranellucci
a776cf280b
New --split option
2014-08-03 16:08:04 +02:00
Alessandro Ranellucci
f81232b79d
Remove --bed-size from --help output
2014-07-04 10:56:06 +02:00
Alessandro Ranellucci
928335f186
Removed print_center option (but left --print-center from CLI)
2014-06-16 23:58:45 +02:00
Alessandro Ranellucci
ddac2d1570
Merged SkeinPanel into MainFrame
2014-06-14 19:54:18 +02:00
Alessandro Ranellucci
e3e69251cb
New XY Size Compensation option. #581 #56
2014-06-10 13:28:57 +02:00
Alessandro Ranellucci
3599bd0bae
Distinct extrusion width for external perimeters
2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
342513a4de
Change: --save will now only save the specified options, without the defaults
2014-06-04 00:08:23 +02:00
Alessandro Ranellucci
88a2e5c791
Typo seal -> seam :-)
2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
8ca352eb62
Separate speed option for support material interface. #2009
2014-05-21 15:21:20 +02:00
Alessandro Ranellucci
093d1cbe2f
Don't transfer ownership of Model to Print::Object
2014-05-07 01:11:49 +02:00
Y. Sapir
85bca96982
Add dir --output msg to README, too.
2014-04-27 14:21:59 +03:00
Y. Sapir
0224e72f8c
Add message about directories as parameters for --output.
2014-04-27 13:57:36 +03:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
4f5d9ca795
Finished --cut implementation
2014-04-25 12:40:21 +02:00
Alessandro Ranellucci
fe1691c151
New --cut feature
2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
d2a6194960
Fix the 'extruder' behavior in CLI and test that Print::Simple accepts an incomplete DynamicConfig object
2014-04-05 10:18:00 +02:00
Alessandro Ranellucci
7421a7bf63
Turn fill_density into percentage
2014-03-22 16:23:33 +01:00
mikegrb
93cbac7288
use /usr/bin/env perl for shebang
2014-03-16 13:19:03 -04:00
Alessandro Ranellucci
a2cbb261cb
More work for refactoring Flow/Extruder
2014-01-03 20:02:00 +01:00
Alessandro Ranellucci
bfa2ee2770
Remove scale, rotate, duplicate, duplicate_grid from config (but leave them in CLI)
2014-01-02 18:01:21 +01:00
Alessandro Ranellucci
385e0e0974
Refactoring: new Slic3r::Print::Simple class for non-interactive slicing (used in CLI and Quick Slice)
2014-01-02 17:54:18 +01:00
Alessandro Ranellucci
5bf0942f45
Satisfy test suite and CLI
2014-01-02 17:24:23 +01:00
Alessandro Ranellucci
beb1baa096
Incomplete work for refactoring regions and flows
2013-12-30 18:28:41 +01:00
Alessandro Ranellucci
c5ead0f2a6
Fixes to Config and plater; also refactored the arrange() code
2013-12-24 00:30:51 +01:00
Alessandro Ranellucci
ab25cc4940
Merge branch 'xs-config'
...
Conflicts:
lib/Slic3r/Config.pm
xs/MANIFEST
2013-12-22 01:41:55 +01:00
