Alessandro Ranellucci
31113b8a78
Typo in 0a88492
2014-05-02 13:31:41 +02:00
Alessandro Ranellucci
0a88492fdc
Use a more robust parallelism detection
2014-05-02 13:26:59 +02:00
Alessandro Ranellucci
fce669dea0
Don't return empty halves after cutting
2014-05-02 13:13:47 +02:00
Alessandro Ranellucci
fc3a73afe8
Make OpenGL::Array thread-safe, thus fixing the crash after the cut dialog is closed in threaded perl
2014-05-02 13:13:13 +02:00
Alessandro Ranellucci
c81ffc391d
Tentative fix for unreproduced compilation error reported
2014-05-02 11:51:07 +02:00
Alessandro Ranellucci
5f88135074
Adjust XY distance of the contact loop
2014-05-02 10:49:14 +02:00
Alessandro Ranellucci
2a3923934e
Update timestamp before the Export G-code dialog is shown. #1995
2014-05-01 21:42:12 +02:00
Alessandro Ranellucci
4311f30739
Fixed one typo in BridgeDetector and some improvements to support material
2014-05-01 19:11:53 +02:00
Alessandro Ranellucci
edeb0a90dd
Use poly2tri for triangulation. This fixes some cases where polyPartition couldn't triangulate successfully. Reported as issue #9 in polyPartition repository. Tested with MotorHalter_0.stl cut at 1.2
2014-05-01 12:07:11 +02:00
Alessandro Ranellucci
60f640f100
Remove self-intersections before supplying polygon data to polyPartition and rename triangulate2() to triangulate_pp()
2014-05-01 10:37:38 +02:00
Alessandro Ranellucci
9734a40647
Fix Polygon::contains_point() overflowing on Windows. #1950
2014-04-30 16:55:20 +02:00
Alessandro Ranellucci
93c1ae92c9
Added failing test case for contains_point() not working on Windows. #1950
2014-04-30 16:44:25 +02:00
Alessandro Ranellucci
010b71e9d4
Improvements to avoid numerical issues in bridge detection and bridge exclusion
2014-04-30 15:16:15 +02:00
Alessandro Ranellucci
581376bf75
Rename EMC to LinuxCNC
2014-04-30 15:05:32 +02:00
Alessandro Ranellucci
83435aebb4
Make sure spiral vase mode is not enabled for multi-island layers. #1938
...
Conflicts:
lib/Slic3r/GCode/Layer.pm
t/shells.t
2014-04-30 14:42:08 +02:00
Alessandro Ranellucci
4680bbdfe2
Make sure spiral vase mode is not enabled for multi-island layers. #1938
2014-04-30 12:23:07 +02:00
Alessandro Ranellucci
8ded268e7e
Take into account that $layerm->perimeters also contains ExtrusionPath objects. #1991
2014-04-30 10:47:31 +02:00
Alessandro Ranellucci
1667d1826d
Put continuous base flange under pillars support material
2014-04-30 01:51:19 +02:00
Alessandro Ranellucci
1d10cd3da6
Also remove bridged perimeters area from support material
2014-04-30 01:20:18 +02:00
Alessandro Ranellucci
3e3cc4171c
TODO about bridges and support material
2014-04-29 23:40:52 +02:00
Alessandro Ranellucci
ef2296dc8d
Make sure interface and base generation honor the gap between support material and object
2014-04-29 23:29:52 +02:00
Alessandro Ranellucci
ed1c6d1aaa
Removed debugging line
2014-04-29 23:17:01 +02:00
Alessandro Ranellucci
98e40d3fe4
Store width and height in ExtrusionEntity objects for debugging purposes
2014-04-29 23:16:16 +02:00
Petr Ledvina
78a08e0665
Commented out test (breakpoint) line
2014-04-29 22:55:10 +02:00
Alessandro Ranellucci
a31b2e6ca2
Stricter implementation of the overhang detection. Includes unit tests
2014-04-29 19:58:58 +02:00
Alessandro Ranellucci
caf7b3f97e
Prune bridge angles
2014-04-29 18:36:50 +02:00
Alessandro Ranellucci
7a9dec3720
One more change to multi-value placeholders: indices start from 0. #1899
2014-04-29 17:12:00 +02:00
Alessandro Ranellucci
a4b6075600
Fixed regression and ambiguity about multiple-value placeholders like [first_layer_temperature_1]. Includes several unit tests covering regression. #1899
2014-04-29 17:06:31 +02:00
Alessandro Ranellucci
913ab54a2b
Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907
2014-04-29 15:25:14 +02:00
Alessandro Ranellucci
0b0ec7be37
Fixed regression causing bad loading of multi-extruder values in GUI. #1984
2014-04-28 22:31:29 +02:00
Alessandro Ranellucci
f7421053cc
Improvements to bridge angle detection: use coverage test for all cases (including two-sided bridges and C-shaped bridges) and check for all angles equal to directions of bridge sides
2014-04-28 22:15:40 +02:00
Alessandro Ranellucci
24571612c7
Some minor changes to the newly-ported Extruder class
2014-04-28 22:02:34 +02:00
Alessandro Ranellucci
4c330b6c59
Merge pull request #1968 from sapir/extrudercpp
...
Translate Extruder class to C++
2014-04-28 21:45:53 +02:00
Alessandro Ranellucci
19fdf9b184
Test triangulate2() instead of the faulty triangulate()
2014-04-28 20:19:26 +02:00
Alessandro Ranellucci
2720000a17
New get_trapezoids() implementation. Maybe heavier but it doesn't fail with some versions of GCC like the one provided by Boost.Polygon. #1965
2014-04-28 20:14:20 +02:00
Alessandro Ranellucci
d4e97d17d5
Use -O1 with GCC 4.7.0-4.7.2. #1965
2014-04-28 19:24:19 +02:00
Y. Sapir
ad03a88733
Add xsp wrapper for Pointf class.
2014-04-28 01:13:50 +03:00
Y. Sapir
e005ff32c4
Replace Extruder::config accessor with Perl wrapper, with C++ option accessors.
2014-04-28 00:49:05 +03:00
Y. Sapir
71b0b211ec
Constify ConfigOptionVector::get_at.
2014-04-28 00:19:03 +03:00
Y. Sapir
d824de6168
Keep pointer to PrintConfig instead of copying it.
2014-04-28 00:03:22 +03:00
Y. Sapir
c2b249d059
Add REGISTER_CLASS call for Extruder class.
2014-04-27 23:53:28 +03:00
Y. Sapir
2565d80679
Replace multitude of Extruder fields with querying a PrintConfig object by id.
2014-04-27 23:43:44 +03:00
Y. Sapir
b319dc9361
Correctly convert extruder_offset to Point object before passing to C++ code.
2014-04-27 23:43:43 +03:00
Y. Sapir
717d099ae1
Add XS Extruder files to manifest.
2014-04-27 23:43:43 +03:00
Y. Sapir
04fad70cbf
Make C++ gcode generator use C++ Extruder object directly.
2014-04-27 23:43:43 +03:00
Y. Sapir
66d23a2416
Convert Extruder object (mostly) to C++ with lots of fields.
2014-04-27 23:42:59 +03:00
Alessandro Ranellucci
2738a304e8
Update credits. Mention Gary Hodgson, Petr Ledvinap, Y. Sapir
2014-04-27 20:04:02 +02:00
Alessandro Ranellucci
5296867a38
Merge pull request #1983 from ledvinap/feature-xs-types-final
...
Implement type checking for XS objects
2014-04-27 19:58:34 +02:00
Petr Ledvina
115aa6885f
Implement type checking for XS objects
...
Type handling is mainly done using templates.
Template Slic3r::ClassTraits is used to store info about exported types (perl class name). Currently only perl class name and refference name is used.
Template values are initialized by REGISTER_CLASS macro. This macro is used in .cpp file of class ( it needs to be used exactly for each type).
Ref<type> class is used to return value as perl reference. Operator overloading is used to make c++ and XSpp happy, only pointer value should be possible to return.
Clone<type> class is used to return copy of value ( using new and copy constructor). Copy is created on assigment, this should be probably improved (memory leak on multiple assignments).
It is overloaded to be able to return type, type* and type&.
Typechecking in ExtrusionEntityCollection updated to check all passed types.
2014-04-27 19:38:56 +02:00
Alessandro Ranellucci
e68b6b6f4c
Merge pull request #1980 from sapir/output-dir-msg
...
Add dir --output msg to README, too.
2014-04-27 14:39:22 +02:00
