* Use ipArchimedeanChords pattern for flow rate calibration
* Merge branch 'main' into feature/different_pattern_flowrate
* improve order
* Merge branch 'main' into feature/different_pattern_flowrate
* Introduce option to control number of skirt walls after first layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* One wall draft shield options refactor
* Merge remote-tracking branch 'upstream/main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Renamed to single loop draft shield
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Added Elegoolink connection
* Set Elegoo CC default bed to btPTE
* Friendly output of some error codes of PrintHost
* feat: Add elegoo centauri carbon profile
* fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported.
* feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters.
* feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type.
* fix: Optimize ElegooLink upload; The code is clearer than before.
* feat: Format the ElegooPrintHostSendDialog code.
* fix: Remove the unnecessary instantiation attribute in the Elegoo process.
* fix: Flatpak compilation failed
---------
Co-authored-by: anjis <anjis.zhou@elegoo.com>
Add minimum flow ratios for spiral vase transitsions
Currently when starting the spiral vase the extrusion rate is ramped
from 0 to 100% on the first layer and from 100% to 0% on the last layer.
In some cases it can lead to underextrusion at the beginning and end of
the spiral.
This change adds minimum flow ratio options for the beginning and the end
of the vase. This means that instead of ramping from 0% to 100% it
instead ramps from for example 20% to 100%.
This issue has been reported in SuperSlicer
https://github.com/supermerill/SuperSlicer/issues/4195
* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
strength can be improved by increasing this value.
Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
(cherry picked from commit 7697eb3dc8f87204d28e6be9adaf55dfcdadbc74)
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.
jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
(cherry picked from commit a557bbe758cd352fa9bb48323995ed2c90737577)
* Add support for perlin noise fuzzy skin
* Support multiple types of coherent noise
* Updated tooltips for more clarity.
* Reorder options as suggested by @discip
* Fix accidental removal of &
* Move libnoise to deps
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Enhancement: ERS segment length - convert to float
To allow splitting of line segments down to 0.5mm for improved external surface finish.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Option to limit ERS to external perimeters and overhangs only
* Label name
* Label update
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Ported filament shrinkage compensation from Prusa Slicer. Updated logic to be 100 = no shrinkage to be consistent with orca definitions
* Code comments update
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge remote-tracking branch 'upstream/main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Revert "Fix #3311: filament Load / Unload time was not used in time estimation (#3706)"
This reverts commit 252788419b.
* revamp tool/filament change time
* tweak message
* Adaptive Pressure advance options setup
* Dynamic PA - PCHIP interpolator code and tests
* Integrate dynamic PA with slicing code - emit new PA values per speed change
* Link adaptive PA to role change instead of speed change
* Adaptive PA - Alpha 2
Reduce the frequency of requested PA changes by introducing a "state" variable.
Implement user toggle for adapting PA for external walls for overhangs
* Hide adaptive PA for overhangs
* Convert Adaptive PA to use volumetric flow model and start preparing for converting to Gcode post processor
* Converted Dynamic PA to a post processing filter. Reverted changes in GCode cpp and created tagging mechanism to allow filter to apply PA changes.
* Removed adaptive PA for overhangs
* Foundations for two dimensional adaptive PA based on acceleration and volumetric flow speed
* Minor code cleanup and updating of tooltips
* Renaming files for better clarity and generate classes documentation
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Updates for multipath handling part 2
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Trigger PA evaluation more frequently to catch edge cases where speed changes across islands of the same feature type.
* Updates for multipath handling part 2
* Adaptive PA: Implement average flow estimation on loops
* Code formatting
* Fix adaptive PA not adapting for small disconnected external wall line segments.
* Updated to take max print speed of upcoming feature to calculate new PA value.
This is to resolve issue of incorrect PA value used when starting a new feature at an overhang.
* Code clean up
* Performance tuning
* Further performance tuning by reducing use of regex commands in the nested loops and fix bug preventing gcode line output
* Further performance tuning and tweaks to stop searching for max speed after the first travel move.
* Reduce debug information
* Updated debug info
* Fix an issue on seams on specific models when wipe before external perimeter was enabled. Also cleanup documentation and add new to-do's
* Prepare for adaptive PA for overhangs, fix wipe bug & clean up code and comments
* Initial commit for adapting PA when extruding fully overhanging perimeters
* Ignore wipe command when identifying current print speed
* Option to evaluate adaptive PA on overhang regions in preparation for Klipper experimental option testing
* Update to issue PA changes for varying flow conditions within the same feature
* Fix bug where adaptive PA was enabled erroneously for role changes and ignoring user's preference.
* Refactored some code
* More refactoring
* Some bug fixes and enabled comments only when verbose g-code is enabled
* Introduced dedicated PA option for bridges
* Code refactoring to optimise initialisation of PA processor (making it faster). Fix a bug where PA was not always set after a toolchange. Improve general error handling and robustness.
* Updates to adaptive PA tooltips
* Bridging PA check with Epsilon instead of 0.
* Adaptive PA: addressing comments
---------
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Init port of Cura's MM interlocking
* Refactor a bit
* Fix crash when bottom surface is multi-color
* Fix crash when boundary avoidance is 0
* Add config
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* POC - Do not slow down external perimeters to meet minimum layer time
* POC - Do not slow down external perimeters to meet minimum layer time - rework
* Revert "POC - Do not slow down external perimeters to meet minimum layer time"
This reverts commit d84ff93f90.
* Dont slow down external perimeters to meet layer time target v2
* Reverted previous implementation
* UI fixes for dont slow down for layer cooling
* Update dont slow down outer walls naming convention
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
