Alessandro Ranellucci
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
Alessandro Ranellucci
bce2663ed8
Restore thin walls and thin fills after last commit
2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
1697cb24a6
Memory optimization and code cleanup. Don't keep deserialized paths
2012-07-20 14:39:56 +02:00
Alessandro Ranellucci
cbb111ee64
Fix for incomplete commit causing thin gaps to throw an error
2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
96a3234eaa
Different speed for external perimeters. #488
2012-06-27 19:42:16 +02:00
Alessandro Ranellucci
0938c73d08
Revert "Don't reset E when the makerbot flavor is selected"
...
This reverts commit 2e5e5983be
2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be
Don't reset E when the makerbot flavor is selected
2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
62bd33a766
Fixed regression causing fatal errors. #429
2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
4aa85f4571
Fixed arcs.t to work with new serialization mechanism
2012-05-19 23:39:36 +02:00
Alessandro Ranellucci
fa4f2c8b97
New option to randomize starting points across layers
2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b246480535
Massive reduction of memory usage (down to one third).
2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a
Even more constants, less memory, more speed
2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b
More constants, less strings => ess memory usage
2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
2a6ad2f3f7
Bugfix: removed warnings. #365
2012-05-13 22:56:40 +02:00
Alessandro Ranellucci
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a
Remove XXX from dependencies
2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
eba7c10018
Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm
2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
7b67fae686
Support material
2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
8ed91a8ec4
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
1c7564e4a4
Thin walls. #24
2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
342823fdf3
Bugfix: fatal error in arc detection code. #133
2011-12-25 13:01:48 +01:00
Alessandro Ranellucci
1e6ecd9eab
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
56691c1dea
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
b8a5d5a208
Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93
2011-12-05 12:15:52 +01:00
Alessandro Ranellucci
0aff5fab24
Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89
2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
248ed8589a
Bugfix: error when concentric infill. #73
2011-11-28 22:52:35 +01:00
Alessandro Ranellucci
3ad9ed74ae
New --solid-infill-feed-rate option. #68
2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
975387d953
New --bridge-feed-rate option. #68
2011-11-28 18:37:53 +01:00
Alessandro Ranellucci
c5d5e4d244
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
2011-11-12 10:18:20 +01:00
Alessandro Ranellucci
d620b46beb
Bugfix: arcs now work (some glitches in detecting their center, though). #30
2011-11-07 14:12:07 +01:00
Alessandro Ranellucci
6d6533831e
New experimental --gcode-arcs options to generate G2/G3 commands. #23
2011-10-28 14:13:44 +02:00
Alessandro Ranellucci
7f341cfcd3
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
2011-10-18 15:57:53 +02:00
Alessandro Ranellucci
5090ae561c
Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects
...
Large refactoring. Speed gains. Removed convex hull for bridges.
2011-10-15 21:14:13 +02:00
Alessandro Ranellucci
e410410dc7
Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.
2011-10-12 14:54:49 +02:00
Alessandro Ranellucci
ea88cad8e3
Don't extrude acute angles
2011-10-01 14:26:54 +02:00
Alessandro Ranellucci
415d1a5170
Optimization of travel paths for fills
2011-09-26 10:52:58 +02:00
Alessandro Ranellucci
0cd10441a1
Optimization of travel paths for perimeters
2011-09-25 23:15:45 +02:00
Alessandro Ranellucci
26b05ab155
Replaced Moose with Moo => big performance boost and easier packaging
2011-09-06 11:50:43 +02:00
Alessandro Ranellucci
428006264d
Generate boundaries of areas to fill (includes some refactoring)
2011-09-04 12:04:01 +02:00
