99 commits

Author	SHA1	Message	Date
Alessandro Ranellucci	eb33c03926	Bugfix: flow wasn't adjusted for first layer according to its height setting. #182	2012-01-30 14:03:12 +01:00
Alessandro Ranellucci	f1b1454b36	Loops were not closing well	2012-01-21 11:51:31 +01:00
Alessandro Ranellucci	1c7564e4a4	Thin walls. #24	2011-12-30 17:17:37 +01:00
Alessandro Ranellucci	caf41f07dd	Output required filament length and volume to command line and to the gcode file itself	2011-12-20 15:29:15 +01:00
Alessandro Ranellucci	d63eabcfa5	Clip less from loops to avoid gaps	2011-12-17 19:54:35 +01:00
Alessandro Ranellucci	1e6ecd9eab	Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.	2011-12-17 19:52:34 +01:00
Alessandro Ranellucci	8e04d763f4	Don't increase flow for overlapping purposes when bridging	2011-12-16 10:53:22 +01:00
Alessandro Ranellucci	d346bc02cc	Comments are now disabled by default, new --gcode-comments option to enable them	2011-12-14 19:49:21 +01:00
Alessandro Ranellucci	56691c1dea	Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112	2011-12-13 17:34:31 +01:00
Alessandro Ranellucci	0a74e068a3	Merge branch 'infill-overlap'	2011-12-08 10:53:24 +01:00
Alessandro Ranellucci	d9a70ea80d	Customizable overlap ratio (it defaults to 0.15 now)	2011-12-08 10:53:07 +01:00
Alessandro Ranellucci	d813aea59a	Don't slow down retractions on bottom layer. #101	2011-12-08 10:28:23 +01:00
Alessandro Ranellucci	53bc9c7421	Customizable speed for small perimeters. #60	2011-12-04 20:50:03 +01:00
Alessandro Ranellucci	0aff5fab24	Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89	2011-12-04 16:24:46 +01:00
Alessandro Ranellucci	52c9897eda	New --extrusion-axis option; removed --no-extrusion	2011-12-01 22:34:21 +01:00
Alessandro Ranellucci	e99c9f9e5f	Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77	2011-12-01 22:04:23 +01:00
Alessandro Ranellucci	92e86a2259	Bugfix: plate was lifted even when retracting for Z change	2011-11-28 19:59:39 +01:00
Alessandro Ranellucci	3ad9ed74ae	New --solid-infill-feed-rate option. #68	2011-11-28 19:11:26 +01:00
Alessandro Ranellucci	4cdd0f6fd0	Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.	2011-11-27 10:12:44 +01:00
Alessandro Ranellucci	8e7d00bb34	Avoid unnecessary retractions during infill. #29	2011-11-26 17:01:00 +01:00
Alessandro Ranellucci	25c85aada5	Renamed "filament packing density" to "extrusion multiplier". Same values. #4	2011-11-25 11:15:20 +01:00
Alessandro Ranellucci	3c0ea0b57f	New --extrusion-width-ratio option. #8	2011-11-25 11:10:35 +01:00
Alessandro Ranellucci	47d347e1b2	Revert "Disable retraction when moving over infill space. #29" ... This reverts commit d6ed9c6f34.	2011-11-24 12:53:09 +01:00
Alessandro Ranellucci	d6ed9c6f34	Disable retraction when moving over infill space. #29	2011-11-21 12:37:12 +01:00
Alessandro Ranellucci	2abd8fe240	Bugfix: bottom layer speed settings were ignored.	2011-11-15 12:02:31 +01:00
Alessandro Ranellucci	c2a2d9ae6d	Combine Z changes and retractions using G0. #51	2011-11-14 12:45:20 +01:00
Alessandro Ranellucci	db35faeabb	New experimental --g0 option for fast retractions. #51	2011-11-14 12:15:32 +01:00
Alessandro Ranellucci	b123194522	New --no-extrusion option to disable E values	2011-11-13 18:26:31 +01:00
Alessandro Ranellucci	c5d5e4d244	Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28	2011-11-12 10:18:20 +01:00
Alessandro Ranellucci	b4e268efad	New --retract-lift option to lift Z while doing travel moves. #25	2011-11-07 15:58:47 +01:00
Alessandro Ranellucci	d620b46beb	Bugfix: arcs now work (some glitches in detecting their center, though). #30	2011-11-07 14:12:07 +01:00
Alessandro Ranellucci	8172bcb772	Bugfix: G2/G3 I and J coordinates were wrong. #30	2011-11-06 20:24:42 +01:00
Alessandro Ranellucci	6d6533831e	New experimental --gcode-arcs options to generate G2/G3 commands. #23	2011-10-28 14:13:44 +02:00
Alessandro Ranellucci	7f341cfcd3	New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill	2011-10-18 15:57:53 +02:00
Alessandro Ranellucci	f7335b6d1e	Bugfix: latest retraction changes broke retraction	2011-10-14 12:14:20 +02:00
Alessandro Ranellucci	e410410dc7	Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.	2011-10-12 14:54:49 +02:00
Alessandro Ranellucci	82d8d0896f	Reset extrusion distance during retracts	2011-10-11 17:53:50 +02:00
Alessandro Ranellucci	ef485e511e	Remove useless F params to shrink gcode size (#14) and Reset E before exceeding 65535 (#13)	2011-10-11 16:04:50 +02:00
Alessandro Ranellucci	a7d5e643ae	Bugfix: couldn't set fill density to zero	2011-10-10 14:37:40 +02:00
Alessandro Ranellucci	1cb515a8e5	Merge branch 'high-res-perimeters' ... Conflicts: lib/Slic3r/Extruder.pm	2011-10-06 20:09:50 +02:00
Alessandro Ranellucci	5daaf454b1	Faster algorithm for rectilinear fill	2011-10-06 17:13:42 +02:00
Alessandro Ranellucci	119eb0693f	New high_res_perimeters option (like the "Skin" plugin for Skeinforge)	2011-10-06 17:11:59 +02:00
Alessandro Ranellucci	1978a99416	Faster algorithm for rectilinear fill	2011-10-06 16:22:22 +02:00
Alessandro Ranellucci	5a07137def	Fixes to retraction and skirt	2011-10-05 21:25:17 +02:00
Alessandro Ranellucci	794b7a99d2	Fixes for hi-res STL models	2011-10-04 17:55:55 +02:00
Alessandro Ranellucci	21d287504c	New --perimeter-feed-rate and --retract-before-travel options. Includes some refactoring and fixes.	2011-10-02 09:57:37 +02:00
Alessandro Ranellucci	55f2247cd9	New extrusion math	2011-10-01 18:10:33 +02:00
Alessandro Ranellucci	b61b543243	Minor cleanups	2011-09-26 19:53:01 +02:00
Alessandro Ranellucci	081f65852d	Refactor extrusion logic in a dedicated class	2011-09-26 11:42:08 +02:00