3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-12-05 16:51:07 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 4

Internal parameter and tool tip tweaking

Browse source
This commit is contained in:
igiannakas 2023-09-24 11:39:23 +01:00
parent cc5a350e9f
commit fe6c979f66
2 changed files with 6 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

2
src/libslic3r/GCode/PressureEqualizer.cpp
View file

@ -33,7 +33,7 @@ static constexpr int max_look_back_limit = 128;
// its all one continous extruded line. Above this distance we assume extruder pressure hits 0 // its all one continous extruded line. Above this distance we assume extruder pressure hits 0
// This exists because often there's tiny travel moves between stuff like infill // This exists because often there's tiny travel moves between stuff like infill
// lines where some extruder pressure will remain (so we should equalize between these small travels) // lines where some extruder pressure will remain (so we should equalize between these small travels)
static constexpr long max_ignored_gap_between_extruding_segments = 10; static constexpr long max_ignored_gap_between_extruding_segments = 3;
PressureEqualizer::PressureEqualizer(const Slic3r::GCodeConfig &config) : m_use_relative_e_distances(config.use_relative_e_distances.value) PressureEqualizer::PressureEqualizer(const Slic3r::GCodeConfig &config) : m_use_relative_e_distances(config.use_relative_e_distances.value)
{ {

11
src/libslic3r/PrintConfig.cpp
View file

@ -2478,12 +2478,11 @@ def = this->add("filament_loading_speed", coFloats);
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. " "It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. "
"Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n" "Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n"
"A value of 0 disables the feature. \n\n" "A value of 0 disables the feature. \n\n"
"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) a sensible value is around " "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) a sensible value is around"
"5x to 10x the maximum volumetric flow rate the hot end is capable off under ideal conditions. This allows " "300-400mm3/s2. This allows for just enough smoothing to assist pressure advance in "
"for just enough smoothing to assist pressure advance in areas where sudden flow changes happen. A value of " "areas where sudden flow changes happen. \n\n"
"250-300 is a good starting point.\n\n" "For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a "
"For slower printers without pressure advance, the value should be set much lower. A value of 10-15 is a " "good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n\n"
"good starting point for direct drive extruders and 2-3 for Bowden style. \n\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n\n"
"Note: this parameter disables arc fitting."); "Note: this parameter disables arc fitting.");
def->sidetext = L("mm³/s²"); def->sidetext = L("mm³/s²");