3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-06 14:37:36 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Standard units don't need translation (#9965)
Some checks are pending
Build all / Build All (push) Waiting to run
Details
Build all / Flatpak (push) Waiting to run
Details

Browse source
This commit is contained in:
Alexandre Folle de Menezes 2025-06-22 04:10:40 -03:00 • committed by GitHub
parent bd1281954d
commit fa70582ed1
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
35 changed files with 434 additions and 429 deletions
Download patch file Download diff file Expand all files Collapse all files

12
localization/i18n/uk/OrcaSlicer_uk.po
View file

@ -13192,7 +13192,7 @@ msgid ""
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice "
"versa.\n"
"\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec "
"It defines the maximum rate by which the extruded volumetric flow in mm³/s² "
"can change over time. Higher values mean higher extrusion rate changes are "
"allowed, resulting in faster speed transitions.\n"
"\n"
@ -13202,13 +13202,13 @@ msgid ""
"Voron) this value is usually not needed. However it can provide some "
"marginal benefit in certain cases where feature speeds vary greatly. For "
"example, when there are aggressive slowdowns due to overhangs. In these "
"cases a high value of around 300-350mm3/s2 is recommended as this allows for "
"just enough smoothing to assist pressure advance achieve a smoother flow "
"cases a high value of around 300-350 mm³/s² is recommended as this allows "
"for just enough smoothing to assist pressure advance achieve a smoother flow "
"transition.\n"
"\n"
"For slower printers without pressure advance, the value should be set much "
"lower. A value of 10-15mm3/s2 is a good starting point for direct drive "
"extruders and 5-10mm3/s2 for Bowden style.\n"
"lower. A value of 10-15 mm³/s² is a good starting point for direct drive "
"extruders and 5-10 mm³/s² for Bowden style.\n"
"\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n"
"\n"
@ -15024,7 +15024,7 @@ msgid ""
"the force with which the nozzle collides with any blobs that may have formed "
"on the wipe tower.\n"
"\n"
"Before increasing this parameter beyond the default of 90mm/sec, make sure "
"Before increasing this parameter beyond the default of 90 mm/s, make sure "
"your printer can reliably bridge at the increased speeds and that ooze when "
"tool changing is well controlled.\n"
"\n"