diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json index c7c1632678..664ad511ca 100644 --- a/resources/profiles/Artillery.json +++ b/resources/profiles/Artillery.json @@ -1,9 +1,13 @@ { "name": "Artillery", - "version": "02.03.01.10", + "version": "02.03.02.10", "force_update": "0", "description": "Artillery configurations", "machine_model_list": [ + { + "name": "Artillery Sidewinder X1", + "sub_path": "machine/Artillery Sidewinder X1.json" + }, { "name": "Artillery Genius", "sub_path": "machine/Artillery Genius.json" @@ -12,143 +16,43 @@ "name": "Artillery Genius Pro", "sub_path": "machine/Artillery Genius Pro.json" }, - { - "name": "Artillery Hornet", - "sub_path": "machine/Artillery Hornet.json" - }, - { - "name": "Artillery M1 Pro", - "sub_path": "machine/Artillery M1 Pro.json" - }, - { - "name": "Artillery Sidewinder X1", - "sub_path": "machine/Artillery Sidewinder X1.json" - }, { "name": "Artillery Sidewinder X2", "sub_path": "machine/Artillery Sidewinder X2.json" }, { - "name": "Artillery Sidewinder X3 Plus", - "sub_path": "machine/Artillery Sidewinder X3 Plus.json" + "name": "Artillery Hornet", + "sub_path": "machine/Artillery Hornet.json" }, { "name": "Artillery Sidewinder X3 Pro", "sub_path": "machine/Artillery Sidewinder X3 Pro.json" }, { - "name": "Artillery Sidewinder X4 Plus", - "sub_path": "machine/Artillery Sidewinder X4 Plus.json" + "name": "Artillery Sidewinder X3 Plus", + "sub_path": "machine/Artillery Sidewinder X3 Plus.json" }, { "name": "Artillery Sidewinder X4 Pro", "sub_path": "machine/Artillery Sidewinder X4 Pro.json" + }, + { + "name": "Artillery Sidewinder X4 Plus", + "sub_path": "machine/Artillery Sidewinder X4 Plus.json" + }, + { + "name": "Artillery M1 Pro", + "sub_path": "machine/Artillery M1 Pro.json" } ], "process_list": [ - { - "name": "0.08mm High Quality @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.24mm Draft @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json" - }, { "name": "fdm_process_common", "sub_path": "process/fdm_process_common.json" }, { - "name": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.10mm Standard @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle", - "sub_path": "process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.30mm Strength @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle", - "sub_path": "process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "0.48mm Standard @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "0.56mm Standard @Artillery M1 Pro 0.8 nozzle", - "sub_path": "process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.08mm High Quality @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.12mm Fine @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.12mm High Quality @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json" + "name": "0.16mm Optimal @Artillery X1", + "sub_path": "process/0.16mm Optimal @Artillery X1.json" }, { "name": "0.15mm Optimal @Artillery Genius", @@ -158,21 +62,13 @@ "name": "0.15mm Optimal @Artillery Genius Pro", "sub_path": "process/0.15mm Optimal @Artillery Genius Pro.json" }, - { - "name": "0.16mm High Quality @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json" - }, { "name": "0.16mm Optimal @Artillery Hornet", "sub_path": "process/0.16mm Optimal @Artillery Hornet.json" }, { - "name": "0.16mm Optimal @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.16mm Optimal @Artillery X1", - "sub_path": "process/0.16mm Optimal @Artillery X1.json" + "name": "0.20mm Standard @Artillery X1", + "sub_path": "process/0.20mm Standard @Artillery X1.json" }, { "name": "0.20mm Standard @Artillery Genius", @@ -182,49 +78,13 @@ "name": "0.20mm Standard @Artillery Genius Pro", "sub_path": "process/0.20mm Standard @Artillery Genius Pro.json" }, - { - "name": "0.20mm Standard @Artillery Hornet", - "sub_path": "process/0.20mm Standard @Artillery Hornet.json" - }, - { - "name": "0.20mm Standard @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.20mm Standard @Artillery X1", - "sub_path": "process/0.20mm Standard @Artillery X1.json" - }, { "name": "0.20mm Standard @Artillery X2", "sub_path": "process/0.20mm Standard @Artillery X2.json" }, { - "name": "0.20mm Standard @Artillery X3Plus 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json" - }, - { - "name": "0.20mm Standard @Artillery X3Pro 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json" - }, - { - "name": "0.20mm Standard @Artillery X4Plus 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json" - }, - { - "name": "0.20mm Standard @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json" - }, - { - "name": "0.20mm Strength @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "0.24mm Draft @Artillery Hornet", - "sub_path": "process/0.24mm Draft @Artillery Hornet.json" - }, - { - "name": "0.24mm Draft @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json" + "name": "0.20mm Standard @Artillery Hornet", + "sub_path": "process/0.20mm Standard @Artillery Hornet.json" }, { "name": "0.24mm Draft @Artillery X1", @@ -239,8 +99,52 @@ "sub_path": "process/0.25mm Draft @Artillery Genius Pro.json" }, { - "name": "0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle", - "sub_path": "process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json" + "name": "0.24mm Draft @Artillery Hornet", + "sub_path": "process/0.24mm Draft @Artillery Hornet.json" + }, + { + "name": "0.20mm Standard @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.12mm Fine @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.20mm Strength @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle", + "sub_path": "process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json" + }, + { + "name": "0.20mm Standard @Artillery X4Plus 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json" }, { "name": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle", @@ -279,107 +183,143 @@ "sub_path": "process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json" }, { - "name": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json" + "name": "0.20mm Standard @Artillery X3Plus 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json" }, { - "name": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json" + "name": "0.20mm Standard @Artillery X3Pro 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json" }, { - "name": "0.12mm Fine @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json" + "name": "0.08mm High Quality @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json" }, { - "name": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json" + "name": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json" }, { - "name": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json" + "name": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json" }, { - "name": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json" + "name": "0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json" }, { - "name": "0.20mm Strength @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json" + "name": "0.08mm High Quality @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json" }, { - "name": "0.24mm Draft @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json" + "name": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json" }, { - "name": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle", - "sub_path": "process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json" + "name": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "0.12mm Fine @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.12mm High Quality @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle", + "sub_path": "process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "0.16mm High Quality @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.16mm Optimal @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.20mm Standard @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.20mm Strength @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.24mm Draft @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle", + "sub_path": "process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.30mm Strength @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle", + "sub_path": "process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "0.48mm Standard @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "0.56mm Standard @Artillery M1 Pro 0.8 nozzle", + "sub_path": "process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json" } ], "filament_list": [ - { - "name": "Artillery PLA @Artillery M1 Pro 0.2 nozzle", - "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "Artillery PLA @Artillery M1 Pro 0.6 nozzle", - "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "Artillery PLA @Artillery M1 Pro 0.8 nozzle", - "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json" - }, { "name": "fdm_filament_common", "sub_path": "filament/fdm_filament_common.json" }, - { - "name": "Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle", - "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle", - "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle", - "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json" - }, - { - "name": "Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle", - "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle", - "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle", - "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json" - }, - { - "name": "Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle", - "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle", - "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle", - "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json" - }, - { - "name": "fdm_filament_abs", - "sub_path": "filament/fdm_filament_abs.json" - }, - { - "name": "fdm_filament_asa", - "sub_path": "filament/fdm_filament_asa.json" - }, - { - "name": "fdm_filament_pet", - "sub_path": "filament/fdm_filament_pet.json" - }, { "name": "fdm_filament_pla", "sub_path": "filament/fdm_filament_pla.json" @@ -389,16 +329,16 @@ "sub_path": "filament/fdm_filament_tpu.json" }, { - "name": "Artillery Generic ABS", - "sub_path": "filament/Artillery Generic ABS.json" + "name": "fdm_filament_pet", + "sub_path": "filament/fdm_filament_pet.json" }, { - "name": "Artillery Generic ASA", - "sub_path": "filament/Artillery Generic ASA.json" + "name": "fdm_filament_abs", + "sub_path": "filament/fdm_filament_abs.json" }, { - "name": "Artillery Generic PETG", - "sub_path": "filament/Artillery Generic PETG.json" + "name": "fdm_filament_asa", + "sub_path": "filament/fdm_filament_asa.json" }, { "name": "Artillery Generic PLA", @@ -408,98 +348,58 @@ "name": "Artillery Generic PLA-CF", "sub_path": "filament/Artillery Generic PLA-CF.json" }, + { + "name": "Artillery Generic PETG", + "sub_path": "filament/Artillery Generic PETG.json" + }, + { + "name": "Artillery Generic ABS", + "sub_path": "filament/Artillery Generic ABS.json" + }, { "name": "Artillery Generic TPU", "sub_path": "filament/Artillery Generic TPU.json" }, { - "name": "Artillery ABS", - "sub_path": "filament/Artillery ABS.json" - }, - { - "name": "Artillery ABS @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery ASA @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PA @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PA-CF @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PC @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PET @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PETG", - "sub_path": "filament/Artillery PETG.json" - }, - { - "name": "Artillery PETG @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json" + "name": "Artillery Generic ASA", + "sub_path": "filament/Artillery Generic ASA.json" }, { "name": "Artillery PLA Basic", "sub_path": "filament/Artillery PLA Basic.json" }, - { - "name": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json" - }, { "name": "Artillery PLA Matte", "sub_path": "filament/Artillery PLA Matte.json" }, - { - "name": "Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json" - }, { "name": "Artillery PLA Silk", "sub_path": "filament/Artillery PLA Silk.json" }, - { - "name": "Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json" - }, { "name": "Artillery PLA Tough", "sub_path": "filament/Artillery PLA Tough.json" }, { - "name": "Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery PVA @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json" + "name": "Artillery PETG", + "sub_path": "filament/Artillery PETG.json" }, { "name": "Artillery TPU", "sub_path": "filament/Artillery TPU.json" }, { - "name": "Artillery TPU @Artillery M1 Pro 0.4 nozzle", - "sub_path": "filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json" + "name": "Artillery ABS", + "sub_path": "filament/Artillery ABS.json" }, { "name": "Artillery ABS @Artillery M1 Pro 0.2 nozzle", "sub_path": "filament/Artillery ABS @Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery ABS @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery ABS @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery ABS @Artillery M1 Pro 0.6 nozzle.json" @@ -512,6 +412,10 @@ "name": "Artillery ASA @Artillery M1 Pro 0.2 nozzle", "sub_path": "filament/Artillery ASA @Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery ASA @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery ASA @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery ASA @Artillery M1 Pro 0.6 nozzle.json" @@ -524,6 +428,10 @@ "name": "Artillery PET @Artillery M1 Pro 0.2 nozzle", "sub_path": "filament/Artillery PET @Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery PET @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery PET @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery PET @Artillery M1 Pro 0.6 nozzle.json" @@ -536,6 +444,10 @@ "name": "Artillery PETG @Artillery M1 Pro 0.2 nozzle", "sub_path": "filament/Artillery PETG @Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery PETG @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery PETG @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery PETG @Artillery M1 Pro 0.6 nozzle.json" @@ -544,10 +456,94 @@ "name": "Artillery PETG @Artillery M1 Pro 0.8 nozzle", "sub_path": "filament/Artillery PETG @Artillery M1 Pro 0.8 nozzle.json" }, + { + "name": "Artillery PLA @Artillery M1 Pro 0.2 nozzle", + "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "Artillery PLA @Artillery M1 Pro 0.6 nozzle", + "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "Artillery PLA @Artillery M1 Pro 0.8 nozzle", + "sub_path": "filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle", + "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle", + "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle", + "sub_path": "filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle", + "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle", + "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle", + "sub_path": "filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json" + }, + { + "name": "Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PA-CF @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PA @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PC @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle", + "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json" + }, + { + "name": "Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json" + }, + { + "name": "Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle", + "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json" + }, + { + "name": "Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle", + "sub_path": "filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json" + }, { "name": "Artillery PVA @Artillery M1 Pro 0.2 nozzle", "sub_path": "filament/Artillery PVA @Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery PVA @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery PVA @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery PVA @Artillery M1 Pro 0.6 nozzle.json" @@ -556,6 +552,10 @@ "name": "Artillery PVA @Artillery M1 Pro 0.8 nozzle", "sub_path": "filament/Artillery PVA @Artillery M1 Pro 0.8 nozzle.json" }, + { + "name": "Artillery TPU @Artillery M1 Pro 0.4 nozzle", + "sub_path": "filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery TPU @Artillery M1 Pro 0.6 nozzle", "sub_path": "filament/Artillery TPU @Artillery M1 Pro 0.6 nozzle.json" @@ -570,10 +570,18 @@ "name": "fdm_machine_common", "sub_path": "machine/fdm_machine_common.json" }, + { + "name": "Artillery Sidewinder X1 0.4 nozzle", + "sub_path": "machine/Artillery Sidewinder X1 0.4 nozzle.json" + }, { "name": "Artillery Genius 0.4 nozzle", "sub_path": "machine/Artillery Genius 0.4 nozzle.json" }, + { + "name": "Artillery Sidewinder X2 0.4 nozzle", + "sub_path": "machine/Artillery Sidewinder X2 0.4 nozzle.json" + }, { "name": "Artillery Genius Pro 0.4 nozzle", "sub_path": "machine/Artillery Genius Pro 0.4 nozzle.json" @@ -583,37 +591,29 @@ "sub_path": "machine/Artillery Hornet 0.4 nozzle.json" }, { - "name": "Artillery M1 Pro 0.4 nozzle", - "sub_path": "machine/Artillery M1 Pro 0.4 nozzle.json" - }, - { - "name": "Artillery Sidewinder X1 0.4 nozzle", - "sub_path": "machine/Artillery Sidewinder X1 0.4 nozzle.json" - }, - { - "name": "Artillery Sidewinder X2 0.4 nozzle", - "sub_path": "machine/Artillery Sidewinder X2 0.4 nozzle.json" + "name": "Artillery Sidewinder X3 Pro 0.4 nozzle", + "sub_path": "machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json" }, { "name": "Artillery Sidewinder X3 Plus 0.4 nozzle", "sub_path": "machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json" }, { - "name": "Artillery Sidewinder X3 Pro 0.4 nozzle", - "sub_path": "machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json" + "name": "Artillery Sidewinder X4 Pro 0.4 nozzle", + "sub_path": "machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json" }, { "name": "Artillery Sidewinder X4 Plus 0.4 nozzle", "sub_path": "machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json" }, - { - "name": "Artillery Sidewinder X4 Pro 0.4 nozzle", - "sub_path": "machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json" - }, { "name": "Artillery M1 Pro 0.2 nozzle", "sub_path": "machine/Artillery M1 Pro 0.2 nozzle.json" }, + { + "name": "Artillery M1 Pro 0.4 nozzle", + "sub_path": "machine/Artillery M1 Pro 0.4 nozzle.json" + }, { "name": "Artillery M1 Pro 0.6 nozzle", "sub_path": "machine/Artillery M1 Pro 0.6 nozzle.json" diff --git a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.2 nozzle.json index 032e4427f4..6aed1aa063 100644 --- a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.2 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "260" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] -} \ No newline at end of file + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json index 875f4864c6..a513d2fa14 100644 --- a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.4 nozzle.json @@ -19,6 +19,7 @@ "filament_settings_id": [ "Artillery ABS @Artillery M1 Pro 0.4 nozzle" ], + "is_custom_defined": "0", "slow_down_layer_time": [ "12" ], @@ -26,7 +27,7 @@ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.3" + "0.8" ], "filament_retraction_speed": [ "40" @@ -102,5 +103,7 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.2.2" + } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.6 nozzle.json index bfa41358b7..61f3c3ac4a 100644 --- a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.6 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "260" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] -} \ No newline at end of file + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.8 nozzle.json index e33bbd96de..c31bcb691f 100644 --- a/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ABS @Artillery M1 Pro 0.8 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "260" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] -} \ No newline at end of file + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.2 nozzle.json index fde322042a..0b9d5717f4 100644 --- a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.2 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "270" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] -} \ No newline at end of file + ], + "version": "2.1.1.0" +} diff --git a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json index 428dd19599..03169714d5 100644 --- a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.4 nozzle.json @@ -40,6 +40,7 @@ "filament_type": [ "ASA" ], + "is_custom_defined": "0", "nozzle_temperature": [ "260" ], @@ -111,5 +112,7 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.2.2" + } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.6 nozzle.json index e9f26828fc..565a7ab466 100644 --- a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.6 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "270" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.8 nozzle.json index ade4239d14..ca4d108537 100644 --- a/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery ASA @Artillery M1 Pro 0.8 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "270" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json index eac9a4c0f7..f64bf35225 100644 --- a/resources/profiles/Artillery/filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PA @Artillery M1 Pro 0.4 nozzle.json @@ -14,19 +14,19 @@ "100" ], "fan_max_speed": [ - "100" + "90" ], "fan_min_speed": [ - "100" + "60" ], "filament_flow_ratio": [ - "1.04" + "0.99" ], "filament_max_volumetric_speed": [ - "14" + "8" ], "additional_cooling_fan_speed": [ - "100" + "70" ], "filament_settings_id": [ "Artillery PA @Artillery M1 Pro 0.4 nozzle" @@ -35,22 +35,26 @@ "PA" ], "nozzle_temperature": [ - "210" + "240" ], "nozzle_temperature_initial_layer": [ - "210" + "240" ], "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ "240" ], "slow_down_layer_time": [ - "10" + "6" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.3" + "0.8" ], "filament_retraction_speed": [ "30" @@ -62,10 +66,10 @@ "Artillery" ], "filament_z_hop": [ - "0.4" + "0.6" ], "temperature_vitrification": [ - "60" + "108" ], "enable_pressure_advance": [ "1" @@ -77,7 +81,7 @@ "50" ], "slow_down_min_speed": [ - "20" + "10" ], "filament_retract_lift_below": [ "259" @@ -97,7 +101,16 @@ "cool_plate_temp_initial_layer": [ "100" ], + "chamber_temperature": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "overhang_fan_threshold": [ + "0%" + ], "pressure_advance": [ - "0.032" + "0.07" ] } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json index d1f6ebe215..fc3e46c605 100644 --- a/resources/profiles/Artillery/filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PA-CF @Artillery M1 Pro 0.4 nozzle.json @@ -1,9 +1,9 @@ { - "type": "filament", + "from": "system", "name": "Artillery PA-CF @Artillery M1 Pro 0.4 nozzle", "inherits": "Artillery Generic PLA", - "from": "system", "instantiation": "true", + "is_custom_defined": "0", "complete_print_exhaust_fan_speed": [ "0" ], @@ -49,11 +49,12 @@ "slow_down_layer_time": [ "2" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.3" + "0.8" ], "filament_retraction_speed": [ "30" @@ -115,6 +116,9 @@ "close_fan_the_first_x_layers": [ "3" ], + "reduce_fan_stop_start_freq": [ + "0" + ], "pressure_advance": [ "0.092" ] diff --git a/resources/profiles/Artillery/filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json index 40bd3de77a..1d0010b1df 100644 --- a/resources/profiles/Artillery/filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PC @Artillery M1 Pro 0.4 nozzle.json @@ -11,22 +11,22 @@ "0" ], "fan_cooling_layer_time": [ - "100" + "30" ], "fan_max_speed": [ - "100" + "0" ], "fan_min_speed": [ - "100" + "0" ], "filament_flow_ratio": [ - "1.04" + "0.94" ], "filament_max_volumetric_speed": [ - "14" + "6" ], "additional_cooling_fan_speed": [ - "100" + "0" ], "filament_settings_id": [ "Artillery PC @Artillery M1 Pro 0.4 nozzle" @@ -34,23 +34,28 @@ "filament_type": [ "PC" ], + "is_custom_defined": "0", "nozzle_temperature": [ - "210" + "295" ], "nozzle_temperature_initial_layer": [ - "210" + "295" ], "nozzle_temperature_range_high": [ - "240" + "300" + ], + "nozzle_temperature_range_low": [ + "250" ], "slow_down_layer_time": [ - "10" + "2" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.3" + "0.8" ], "filament_retraction_speed": [ "30" @@ -65,7 +70,7 @@ "0.4" ], "temperature_vitrification": [ - "60" + "120" ], "enable_pressure_advance": [ "1" @@ -77,7 +82,7 @@ "50" ], "slow_down_min_speed": [ - "20" + "0" ], "filament_retract_lift_below": [ "259" @@ -86,18 +91,33 @@ "30" ], "textured_plate_temp": [ - "100" + "110" ], "textured_plate_temp_initial_layer": [ - "100" + "110" ], "cool_plate_temp": [ - "100" + "110" ], "cool_plate_temp_initial_layer": [ - "100" + "110" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "60" + ], + "chamber_temperature": [ + "50" + ], + "reduce_fan_stop_start_freq": [ + "0" ], "pressure_advance": [ - "0.032" + "0.03" ] } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.2 nozzle.json index ef0de50e6d..b1b14f636a 100644 --- a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.2 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json index 7e1b1bdd19..b6440584b5 100644 --- a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.4 nozzle.json @@ -37,6 +37,7 @@ "filament_type": [ "PET" ], + "is_custom_defined": "0", "slow_down_layer_time": [ "12" ], @@ -82,14 +83,11 @@ "overhang_fan_threshold": [ "10%" ], - "overhang_fan_speed": [ - "90" - ], "enable_pressure_advance": [ "1" ], "pressure_advance": [ - "0.063" + "0.08" ], "textured_plate_temp": [ "80" @@ -104,12 +102,16 @@ "80" ], "filament_flow_ratio": [ - "1.029" + "0.97" ], "slow_down_min_speed": [ "20" ], + "overhang_fan_speed": [ + "100" + ], "filament_deretraction_speed": [ "30" - ] + ], + "version": "2.1.2.2" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.6 nozzle.json index 9c29ae18b6..23a6cc7d8f 100644 --- a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.6 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.8 nozzle.json index 4df0aae950..f548a115cc 100644 --- a/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PET @Artillery M1 Pro 0.8 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "100" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.2 nozzle.json index d1882eccae..d409e61cea 100644 --- a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.2 nozzle.json @@ -232,6 +232,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json index 4f51108e50..2b96a61f93 100644 --- a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.4 nozzle.json @@ -28,6 +28,7 @@ "filament_start_gcode": [ "; filament start gcode " ], + "is_custom_defined": "0", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], @@ -68,10 +69,10 @@ "70" ], "nozzle_temperature": [ - "240" + "250" ], "nozzle_temperature_initial_layer": [ - "240" + "250" ], "fan_max_speed": [ "90" @@ -104,7 +105,7 @@ "220" ], "filament_flow_ratio": [ - "1.029" + "0.95" ], "slow_down_min_speed": [ "20" diff --git a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.6 nozzle.json index e870a95cb7..24ba7fccec 100644 --- a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.6 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.8 nozzle.json index 4f39e4a55f..5957f705e2 100644 --- a/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PETG @Artillery M1 Pro 0.8 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json index 82a992ac9c..c5be6f682d 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.2 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "210" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json index bc40c2bdf9..2c987c326a 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.6 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "210" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json index 722a0c0ee8..4f3a302e7c 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA @Artillery M1 Pro 0.8 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "210" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json index ab2a670623..233829c04d 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.2 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json index b6bf142c7a..fccd74088d 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle.json @@ -1,8 +1,4 @@ { - "type": "filament", - "name": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle", - "inherits": "Artillery Generic PLA", - "from": "system", "instantiation": "true", "complete_print_exhaust_fan_speed": [ "0" @@ -20,7 +16,7 @@ "100" ], "filament_flow_ratio": [ - "0.95" + "0.98" ], "filament_max_volumetric_speed": [ "27" @@ -34,8 +30,11 @@ "filament_type": [ "PLA Basic" ], + "from": "system", + "is_custom_defined": "0", + "name": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle", "nozzle_temperature": [ - "210" + "220" ], "nozzle_temperature_initial_layer": [ "220" @@ -46,6 +45,7 @@ "slow_down_layer_time": [ "6" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], @@ -64,6 +64,7 @@ "filament_z_hop": [ "0.6" ], + "inherits": "Artillery Generic PLA", "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json index bf26b66778..09f64ee70f 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.6 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json index 3521807ef5..6998c0691f 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.8 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json index 45f6ae72a0..66d7ce8156 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic+ @Artillery M1 Pro 0.4 nozzle.json @@ -34,6 +34,7 @@ "filament_type": [ "PLA Basic+" ], + "is_custom_defined": "0", "nozzle_temperature": [ "210" ], @@ -43,6 +44,7 @@ "slow_down_layer_time": [ "6" ], + "version": "2.1.1.0", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], diff --git a/resources/profiles/Artillery/filament/Artillery PLA Basic.json b/resources/profiles/Artillery/filament/Artillery PLA Basic.json index 2bd2f060c5..a5432bae98 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Basic.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Basic.json @@ -60,5 +60,6 @@ ], "pressure_advance": [ "0.046" - ] + ], + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json index a266d79ff0..2cc630fb5d 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.2 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.2 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json index 08ed5ffb0a..14835342b1 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle.json @@ -20,7 +20,7 @@ "100" ], "filament_flow_ratio": [ - "0.95" + "1" ], "filament_max_volumetric_speed": [ "27" @@ -34,8 +34,9 @@ "filament_type": [ "PLA Matte" ], + "is_custom_defined": "0", "nozzle_temperature": [ - "210" + "220" ], "nozzle_temperature_initial_layer": [ "220" @@ -55,6 +56,7 @@ "slow_down_layer_time": [ "6" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], @@ -83,6 +85,6 @@ "15" ], "pressure_advance": [ - "0.032" + "0.038" ] } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json index 13b36fd2c9..cc0e26a067 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.6 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.6 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json index c46519bb0f..3096a99b63 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Matte @Artillery M1 Pro 0.8 nozzle.json @@ -30,5 +30,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.8 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Matte.json b/resources/profiles/Artillery/filament/Artillery PLA Matte.json index 858272c274..7bfbb02af6 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Matte.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Matte.json @@ -60,5 +60,6 @@ ], "pressure_advance": [ "0.046" - ] + ], + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json index dd56353128..b641ecaba5 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.2 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.2 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json index f28ef2632e..88ac852851 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle.json @@ -25,6 +25,7 @@ "filament_settings_id": [ "Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -34,11 +35,12 @@ "slow_down_layer_time": [ "6" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.1" + "0.8" ], "filament_retraction_speed": [ "20" @@ -47,7 +49,7 @@ "20" ], "additional_cooling_fan_speed": [ - "100" + "50" ], "filament_start_gcode": [ "" diff --git a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json index 786ae45125..bbc76298be 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.6 nozzle.json @@ -27,5 +27,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.6 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json index 4df235ee49..acf6ea996f 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Silk @Artillery M1 Pro 0.8 nozzle.json @@ -30,5 +30,7 @@ ], "compatible_printers": [ "Artillery M1 Pro 0.8 nozzle" - ] + ], + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Silk.json b/resources/profiles/Artillery/filament/Artillery PLA Silk.json index 87434301f3..4a8c79bdb4 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Silk.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Silk.json @@ -60,5 +60,6 @@ ], "pressure_advance": [ "0.046" - ] + ], + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA Tough.json b/resources/profiles/Artillery/filament/Artillery PLA Tough.json index 01141db114..f1075664fa 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA Tough.json +++ b/resources/profiles/Artillery/filament/Artillery PLA Tough.json @@ -66,5 +66,6 @@ ], "pressure_advance": [ "0.046" - ] + ], + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json index 187e2d67f9..3889b56a0b 100644 --- a/resources/profiles/Artillery/filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle.json @@ -26,7 +26,7 @@ "14" ], "additional_cooling_fan_speed": [ - "100" + "50" ], "filament_settings_id": [ "Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle" @@ -34,11 +34,12 @@ "filament_type": [ "PLA-CF" ], + "is_custom_defined": "0", "nozzle_temperature": [ - "210" + "220" ], "nozzle_temperature_initial_layer": [ - "210" + "220" ], "nozzle_temperature_range_high": [ "240" @@ -46,11 +47,12 @@ "slow_down_layer_time": [ "10" ], + "version": "2.1.2.2", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], "filament_retraction_length": [ - "1.3" + "0.8" ], "filament_retraction_speed": [ "30" diff --git a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.2 nozzle.json index 722389db32..d5a94356b5 100644 --- a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.2 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -282,5 +283,6 @@ ], "textured_plate_temp_initial_layer": [ "45" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json index be8b3080d0..9824f644fd 100644 --- a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.4 nozzle.json @@ -37,6 +37,7 @@ "hot_plate_temp_initial_layer": [ "60" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -90,5 +91,6 @@ ], "pressure_advance": [ "0.05" - ] + ], + "version": "2.1.2.2" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.6 nozzle.json index 8c5bd08fd2..971233ea75 100644 --- a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.6 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -282,5 +283,6 @@ ], "textured_plate_temp_initial_layer": [ "45" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.8 nozzle.json index 0fbfd43a63..70c1c74207 100644 --- a/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery PVA @Artillery M1 Pro 0.8 nozzle.json @@ -226,6 +226,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "240" ], @@ -282,5 +283,6 @@ ], "textured_plate_temp_initial_layer": [ "45" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json index e120c0279a..d9dafbf9ae 100644 --- a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.4 nozzle.json @@ -23,8 +23,9 @@ "60" ], "additional_cooling_fan_speed": [ - "100" + "50" ], + "is_custom_defined": "0", "compatible_printers": [ "Artillery M1 Pro 0.4 nozzle" ], @@ -108,5 +109,6 @@ ], "cool_plate_temp_initial_layer": [ "60" - ] + ], + "version": "2.1.2.2" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.6 nozzle.json index e8d65fb86f..76c277f609 100644 --- a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.6 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "60" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.8 nozzle.json index 7ffea128a6..9c6941562e 100644 --- a/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/filament/Artillery TPU @Artillery M1 Pro 0.8 nozzle.json @@ -220,6 +220,7 @@ "idle_temperature": [ "0" ], + "is_custom_defined": "0", "nozzle_temperature": [ "220" ], @@ -282,5 +283,6 @@ ], "cool_plate_temp_initial_layer": [ "60" - ] + ], + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/filament/Artillery TPU.json b/resources/profiles/Artillery/filament/Artillery TPU.json index f9d57e4309..8e746d44ac 100644 --- a/resources/profiles/Artillery/filament/Artillery TPU.json +++ b/resources/profiles/Artillery/filament/Artillery TPU.json @@ -78,5 +78,6 @@ ], "pressure_advance": [ "0.06" - ] + ], + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json index 68bff14ed7..2177f1afff 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json @@ -48,6 +48,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n", "long_retractions_when_cut": [ "0" @@ -455,6 +456,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "1", + "version": "2.1.1.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json index 114caaa827..1b4aaf7e92 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json @@ -7,8 +7,9 @@ "instantiation": "true", "is_artillery": "1", "emit_machine_limits_to_gcode": "1", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n", - "machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250729 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-3 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif} \nG1 X260 Y250 F3600 ; move to safe pos \nM400\nTIMELAPSE_TAKE_FRAME\n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S255\nM141 S0\nM106 P1 S255\nM104 S160\nG4 P10000\nM109 S160\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================", + "machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250729 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-3 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif} \nG90\nG1 X200 Y260 F21000\nG1 X200 Y275 F6000\nG1 X160 Y275 F6000\nG1 X137 Y275 F3000\nM400\nTIMELAPSE_TAKE_FRAME\n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S255\nM141 S0\nM106 P1 S255\nM104 S160\nG4 P10000\nM109 S160\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================", "machine_max_acceleration_extruding": [ "20000", "1250" @@ -57,7 +58,7 @@ "20", "12" ], - "machine_start_gcode": ";===== START G-CODE =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250708 =====================\n;===== Filament Temperature Configuration =====================\n;Nozzle_Preheat_Temp:140\n;Bed_Preheat_Temp:[bed_temperature_initial_layer_single]\n{if (nozzle_temperature_initial_layer[0] >250)};Filament_Common_Extrusion_Temp:[nozzle_temperature_initial_layer]{else};Filament_Common_Extrusion_Temp:250{endif}\n;Nozzle_Init_Layer_Temp:[nozzle_temperature_initial_layer]\n;Filament_Softening_Temp:[nozzle_temperature_range_low]\n\n;===== Default Settings =====================\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S153\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA-CF\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y5.8 Z0.2 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X80 Y-0.5 Z5 F18000\nM400\nG1 X80 Y-0.5 Z0.3 F600\nM400\n\nG92 E0\nG1 Z0.3 E8 F300\nM400\n\nG92 E0\nG1 X180 Y-0.5 Z0.3 F1800.0 E10.0;draw line\n\nG92 E0\nG1 X180 Y-2 Z0.3 F1800.0 E0.15;draw line\n\nG92 E0\nG1 X90 Y-2 Z0.3 F1800.0 E9;draw line\n\nG92 E0\nG1 X90 Y0 Z0.2 E0.2 F1800;\n\nG92 E0\nG1 Z0.6 F600\nM400\n\nG1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} F9000\nM400\n\n;===== END G-CODE =====================\n\n\n\n", + "machine_start_gcode":";===== START G-CODE =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250708 =====================\n;===== Filament Temperature Configuration =====================\n;Nozzle_Preheat_Temp:140\n;Bed_Preheat_Temp:[bed_temperature_initial_layer_single]\n{if (nozzle_temperature_initial_layer[0] >250)};Filament_Common_Extrusion_Temp:[nozzle_temperature_initial_layer]{else};Filament_Common_Extrusion_Temp:250{endif}\n;Nozzle_Init_Layer_Temp:[nozzle_temperature_initial_layer]\n;Filament_Softening_Temp:[nozzle_temperature_range_low]\n\n;===== Default Settings =====================\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S153\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA-CF\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y2 Z0 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X20 Y2 Z0 F18000\nM400\n\nG92 E0\nG0 E4;\nM400\n\nG92 E0\nG1 X240 Y2 Z0.2 F1800.0 E11.0;\n\nG92 E0\nG1 X240 Y10 Z0.2 F1800.0 E1;\n\nG92 E0\nG1 X239.5\nG0 E0.2\n\nG92 E0\nG0 Y2.5 E0.125\n\nG92 E0\nG1 X20 F1800.0 E11;\n\nM400\nG92 E0\nG1 Z0.6 F600\nM400\n\nG1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} F9000\nM400\n\n;===== END G-CODE =====================\n\n\n", "print_host": "192.168.3.29", "printable_area": [ "0x0", @@ -69,6 +70,7 @@ "retraction_length": [ "1.3" ], + "version": "2.1.2.2", "z_hop": [ "0.6" ], diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json index cca8f1024f..0f4cbc94d6 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json @@ -48,6 +48,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n", "long_retractions_when_cut": [ "0" @@ -455,6 +456,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "1", + "version": "2.1.1.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json index 46aa56c70a..d4c30ae637 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json @@ -48,6 +48,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n", "long_retractions_when_cut": [ "0" @@ -455,6 +456,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "1", + "version": "2.1.1.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json index 2551f15203..9fc8e6fc5b 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json @@ -51,6 +51,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "", "machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1", "machine_load_filament_time": "0", @@ -211,6 +212,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "0", + "version": "2.0.2.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json index 26cb3daca0..88913a1426 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json @@ -54,6 +54,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "", "machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1", "machine_load_filament_time": "0", @@ -211,6 +212,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "0", + "version": "2.0.2.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json index a16628e7f3..21ac4ada3e 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json @@ -54,6 +54,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0", "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", @@ -211,6 +212,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "1", + "version": "2.0.2.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json index 2198d8ed37..456028bdc8 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json @@ -54,6 +54,7 @@ "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", + "is_custom_defined": "0", "layer_change_gcode": "G92 E0", "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y250 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", @@ -211,6 +212,7 @@ "upward_compatible_machine": [], "use_firmware_retraction": "0", "use_relative_e_distances": "1", + "version": "2.0.2.0", "wipe": [ "0" ], diff --git a/resources/profiles/Artillery/process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json index 62833e4165..4c95c4c56a 100644 --- a/resources/profiles/Artillery/process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json @@ -5,6 +5,8 @@ "from": "system", "instantiation": "true", "initial_layer_speed": "30", + "is_custom_defined": "0", "layer_height": "0.06", - "print_settings_id": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle" -} \ No newline at end of file + "print_settings_id": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" +} diff --git a/resources/profiles/Artillery/process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json index eac469621d..51e88faab9 100644 --- a/resources/profiles/Artillery/process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json @@ -6,8 +6,10 @@ "instantiation": "true", "default_acceleration": "10000", "initial_layer_speed": "30", + "is_custom_defined": "0", "layer_height": "0.06", "outer_wall_acceleration": "5000", "outer_wall_speed": "120", - "print_settings_id": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle" + "print_settings_id": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json index 6782b66043..481c6b555f 100644 --- a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json @@ -6,9 +6,10 @@ "instantiation": "true", "default_acceleration": "10000", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "350", "initial_layer_infill_speed": "80", - "inner_wall_speed": "300", + "inner_wall_speed": "350", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", @@ -18,6 +19,7 @@ "top_surface_pattern": "monotonicline", "travel_speed": "500", "tree_support_branch_diameter_double_wall": "1", + "version": "2.1.2.2", "wall_generator": "classic", "initial_layer_print_height": "0.2", "internal_solid_infill_line_width": "0.42", @@ -37,7 +39,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -54,7 +56,7 @@ "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -86,7 +88,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", "initial_layer_min_bead_width": "85%", @@ -99,9 +101,9 @@ "internal_bridge_flow": "1", "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "350", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -120,7 +122,7 @@ "min_feature_size": "25%", "min_length_factor": "0.5", "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "10", + "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "notes": "", @@ -129,9 +131,9 @@ "ooze_prevention": "0", "outer_wall_acceleration": "5000", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -195,8 +197,8 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "200", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "450", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", "spiral_mode_smooth": "0", @@ -229,10 +231,10 @@ "timelapse_type": "0", "top_shell_thickness": "0.8", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "20000", "top_surface_jerk": "9", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "200", + "travel_acceleration": "1000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", diff --git a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json index f50d9d0e7b..fe3c9310e2 100644 --- a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json @@ -10,5 +10,6 @@ "outer_wall_line_width": "0.42", "print_settings_id": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json index 56e5a6dfc0..31bb0d5773 100644 --- a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json @@ -10,5 +10,6 @@ "outer_wall_line_width": "0.42", "print_settings_id": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json index 2f78eb25c1..f5c38ad2ea 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json @@ -93,12 +93,13 @@ "internal_solid_infill_line_width": "0.22", "internal_solid_infill_pattern": "zig-zag", "internal_solid_infill_speed": "150", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.08", "line_width": "0.22", @@ -263,6 +264,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.1.1.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json index f83d5abd27..f926302a21 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -6,12 +6,14 @@ "instantiation": "true", "default_acceleration": "4000", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "210", "initial_layer_infill_speed": "80", + "is_custom_defined": "0", "print_settings_id": "0.08mm High Quality @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", "top_shell_layers": "9", "travel_speed": "500", + "version": "2.1.1.0", "initial_layer_print_height": "0.2", "inner_wall_speed": "120", "internal_solid_infill_line_width": "0.42", @@ -35,7 +37,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -52,7 +54,7 @@ "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -84,7 +86,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", "initial_layer_min_bead_width": "85%", @@ -97,8 +99,8 @@ "internal_bridge_flow": "1", "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", - "internal_solid_infill_pattern": "monotonic", - "ironing_angle": "0", + "internal_solid_infill_pattern": "zig-zag", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -117,7 +119,7 @@ "min_feature_size": "25%", "min_length_factor": "0.5", "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "10", + "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "notes": "", @@ -125,9 +127,9 @@ "only_one_wall_top": "0", "ooze_prevention": "0", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -226,11 +228,11 @@ "timelapse_type": "0", "top_shell_thickness": "0.8", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", - "top_surface_pattern": "monotonic", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json index 8bcd20f416..7810e8ae2f 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle", "sparse_infill_speed": "150", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json index 6d00c14176..deb545a5aa 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle", "sparse_infill_speed": "150", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json index fa2f4dbd91..17488bc26e 100644 --- a/resources/profiles/Artillery/process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json @@ -7,5 +7,6 @@ "default_acceleration": "10000", "outer_wall_acceleration": "5000", "outer_wall_speed": "120", - "print_settings_id": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle" + "print_settings_id": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json index 07c209d6ec..c4db4a77dd 100644 --- a/resources/profiles/Artillery/process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json @@ -5,5 +5,6 @@ "from": "system", "instantiation": "true", "layer_height": "0.1", - "print_settings_id": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle" + "print_settings_id": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json index 345ae3491a..6dc0bb41f5 100644 --- a/resources/profiles/Artillery/process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json @@ -5,11 +5,13 @@ "from": "system", "instantiation": "true", "default_acceleration": "10000", + "is_custom_defined": "0", "layer_height": "0.1", "outer_wall_acceleration": "5000", "outer_wall_speed": "120", "print_settings_id": "0.10mm Standard @Artillery M1 Pro 0.2 nozzle", "sparse_infill_pattern": "zig-zag", "support_style": "default", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json index 817bb4adfa..127fb7573b 100644 --- a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json @@ -7,17 +7,19 @@ "bottom_shell_layers": "5", "default_acceleration": "10000", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "350", "initial_layer_infill_speed": "80", - "inner_wall_speed": "300", + "inner_wall_speed": "350", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.12mm Fine @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", - "sparse_infill_speed": "400", + "sparse_infill_speed": "430", "top_shell_layers": "5", "top_shell_thickness": "0.6", "top_surface_pattern": "monotonicline", "travel_speed": "700", + "version": "2.1.2.2", "initial_layer_print_height": "0.2", "internal_solid_infill_line_width": "0.42", "layer_height": "0.12", @@ -35,7 +37,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -52,7 +54,7 @@ "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -84,7 +86,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", "initial_layer_min_bead_width": "85%", @@ -97,9 +99,9 @@ "internal_bridge_flow": "1", "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "350", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -127,9 +129,9 @@ "ooze_prevention": "0", "outer_wall_acceleration": "5000", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -193,7 +195,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", "spiral_mode_smooth": "0", @@ -227,12 +229,12 @@ "thick_internal_bridges": "1", "timelapse_type": "0", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "200", + "travel_acceleration": "10000", "travel_jerk": "12", - "travel_speed_z": "0", + "travel_speed_z": "500", "tree_support_adaptive_layer_height": "1", "tree_support_angle_slow": "25", "tree_support_auto_brim": "1", @@ -280,5 +282,5 @@ ], "xy_contour_compensation": "0", "xy_hole_compensation": "0", - "top_bottom_infill_wall_overlap": "15%" + "top_bottom_infill_wall_overlap":"15%" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json index 5eb11491d8..ca7c9e881a 100644 --- a/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json @@ -10,5 +10,6 @@ "outer_wall_line_width": "0.42", "print_settings_id": "0.12mm Fine @Artillery X4Plus 0.4 nozzle", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json index c9d200b4d1..9c4cee1f1b 100644 --- a/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json @@ -10,5 +10,6 @@ "outer_wall_line_width": "0.42", "print_settings_id": "0.12mm Fine @Artillery X4Pro 0.4 nozzle", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json index 62dc77f66d..ab093070f0 100644 --- a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -7,21 +7,23 @@ "bottom_shell_layers": "5", "default_acceleration": "4000", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "230", "inner_wall_speed": "150", + "is_custom_defined": "0", "print_settings_id": "0.12mm High Quality @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", "top_shell_thickness": "0.6", "top_surface_pattern": "monotonicline", "travel_speed": "500", + "version": "2.1.2.2", "initial_layer_print_height": "0.2", "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_speed": "150", + "internal_solid_infill_speed": "180", "layer_height": "0.12", "outer_wall_acceleration": "2000", "outer_wall_line_width": "0.42", "outer_wall_speed": "60", - "sparse_infill_speed": "150", + "sparse_infill_speed": "180", "support_line_width": "0.42", "top_surface_line_width": "0.42", "accel_to_decel_enable": "1", @@ -35,7 +37,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -84,7 +86,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_infill_speed": "30", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", @@ -98,8 +100,8 @@ "internal_bridge_flow": "1", "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", - "internal_solid_infill_pattern": "monotonic", - "ironing_angle": "0", + "internal_solid_infill_pattern": "zig-zag", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -118,7 +120,7 @@ "min_feature_size": "25%", "min_length_factor": "0.5", "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "10", + "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "notes": "", @@ -126,9 +128,9 @@ "only_one_wall_top": "0", "ooze_prevention": "0", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -227,10 +229,10 @@ "timelapse_type": "0", "top_shell_layers": "4", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "150", + "travel_acceleration": "10000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", diff --git a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json index 59a7885c79..30d7ae88b0 100644 --- a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle", "sparse_infill_speed": "180", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json index 2e2a3e9b2c..b54fd63a69 100644 --- a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle", "sparse_infill_speed": "150", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json index 89201e2f78..f1fd0f62f2 100644 --- a/resources/profiles/Artillery/process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json @@ -8,5 +8,6 @@ "layer_height": "0.12", "outer_wall_acceleration": "5000", "outer_wall_speed": "120", - "print_settings_id": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle" + "print_settings_id": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json index 589065bc37..fd8857dc74 100644 --- a/resources/profiles/Artillery/process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json @@ -5,8 +5,10 @@ "from": "system", "instantiation": "true", "default_acceleration": "10000", + "is_custom_defined": "0", "layer_height": "0.14", "outer_wall_acceleration": "5000", "outer_wall_speed": "120", - "print_settings_id": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle" + "print_settings_id": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json index c5a47dce99..bf15e55fa9 100644 --- a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -10,6 +10,7 @@ "gap_infill_speed": "200", "initial_layer_infill_speed": "80", "internal_solid_infill_speed": "200", + "is_custom_defined": "0", "print_settings_id": "0.16mm High Quality @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", "sparse_infill_speed": "200", @@ -17,6 +18,7 @@ "top_shell_thickness": "1", "top_surface_pattern": "monotonicline", "travel_speed": "500", + "version": "2.1.2.2", "initial_layer_print_height": "0.2", "inner_wall_speed": "150", "internal_solid_infill_line_width": "0.42", @@ -37,7 +39,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -54,7 +56,7 @@ "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -86,7 +88,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", "initial_layer_min_bead_width": "85%", @@ -100,7 +102,7 @@ "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_pattern": "monotonic", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -127,9 +129,9 @@ "only_one_wall_top": "0", "ooze_prevention": "0", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -193,7 +195,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", "spiral_mode_smooth": "0", @@ -227,10 +229,10 @@ "thick_internal_bridges": "1", "timelapse_type": "0", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "150", + "travel_acceleration": "10000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", diff --git a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json index 181381f77a..dc73f3a2c3 100644 --- a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle", "sparse_infill_speed": "180", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json index c925ceff9b..e38bc7bdc0 100644 --- a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json @@ -16,5 +16,6 @@ "print_settings_id": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle", "sparse_infill_speed": "180", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json index 79729dfa9a..409bfc670b 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json @@ -6,14 +6,15 @@ "instantiation": "true", "bottom_shell_layers": "4", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "300", "initial_layer_infill_speed": "80", "inner_wall_speed": "300", - "internal_solid_infill_speed": "200", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.16mm Optimal @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", - "sparse_infill_speed": "300", + "sparse_infill_speed": "330", "support_style": "default", "support_type": "tree(auto)", "top_shell_layers": "6", @@ -21,6 +22,7 @@ "top_surface_pattern": "monotonicline", "travel_speed": "500", "tree_support_branch_diameter_double_wall": "1", + "version": "2.1.2.2", "initial_layer_print_height": "0.2", "internal_solid_infill_line_width": "0.42", "layer_height": "0.16", @@ -38,7 +40,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -49,14 +51,14 @@ ], "compatible_printers_condition": "", "counterbore_hole_bridging": "none", - "default_acceleration": "5000", + "default_acceleration": "10000", "default_jerk": "0", "detect_narrow_internal_solid_infill": "1", "detect_overhang_wall": "1", "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -88,7 +90,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", "initial_layer_min_bead_width": "85%", @@ -102,7 +104,7 @@ "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_pattern": "monotonic", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -121,7 +123,7 @@ "min_feature_size": "25%", "min_length_factor": "0.5", "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "10", + "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "notes": "", @@ -130,9 +132,9 @@ "ooze_prevention": "0", "outer_wall_acceleration": "5000", "outer_wall_jerk": "9", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -196,7 +198,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", "spiral_mode_smooth": "0", @@ -228,10 +230,10 @@ "thick_internal_bridges": "1", "timelapse_type": "0", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "200", + "travel_acceleration": "10000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", @@ -280,5 +282,5 @@ ], "xy_contour_compensation": "0", "xy_hole_compensation": "0", - "top_bottom_infill_wall_overlap": "15%" + "top_bottom_infill_wall_overlap":"15%" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json index fa9bc49dc8..91c953fd32 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json @@ -12,5 +12,6 @@ "print_settings_id": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle", "sparse_infill_speed": "180", "support_line_width": "0.42", - "top_surface_line_width": "0.42" + "top_surface_line_width": "0.42", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json index 77f75b6395..6190830603 100644 --- a/resources/profiles/Artillery/process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json @@ -2,9 +2,10 @@ "type": "process", "name": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle", "inherits": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle", - "from": "system", "instantiation": "true", + "is_custom_defined": "0", "layer_height": "0.18", "print_settings_id": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle", - "slow_down_layers": "3" + "slow_down_layers": "3", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json index e7464ceaac..6c0dc79f39 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json @@ -11,6 +11,7 @@ "gap_infill_speed": "250", "initial_layer_infill_speed": "80", "inner_wall_speed": "300", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.20mm Standard @Artillery M1 Pro 0.4 nozzle", "reduce_crossing_wall": "0", @@ -26,6 +27,7 @@ "travel_speed": "700", "tree_support_branch_diameter_angle": "5", "tree_support_branch_diameter_double_wall": "0", + "version": "2.1.2.2", "wall_generator": "arachne", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", @@ -56,7 +58,7 @@ "draft_shield": "disabled", "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "1", + "enable_arc_fitting": "0", "enable_overhang_speed": "1", "enable_prime_tower": "1", "enable_support": "0", @@ -103,7 +105,7 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "250", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -197,7 +199,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "sparse_infill_speed": "270", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", @@ -205,7 +207,7 @@ "staggered_inner_seams": "1", "standby_temperature_delta": "-5", "support_angle": "0", - "support_base_pattern": "rectilinear", + "support_base_pattern": "default", "support_base_pattern_spacing": "2.5", "support_bottom_interface_spacing": "0.5", "support_bottom_z_distance": "0.2", @@ -221,11 +223,11 @@ "support_interface_speed": "80", "support_interface_top_layers": "2", "support_line_width": "0.42", - "support_object_xy_distance": "0.35", + "support_object_xy_distance": "0.5", "support_on_build_plate_only": "0", "support_remove_small_overhang": "1", "support_threshold_angle": "30", - "support_top_z_distance": "0.2", + "support_top_z_distance": "0.16", "thick_bridges": "0", "thick_internal_bridges": "1", "timelapse_type": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json index 095eca39f6..7d80de5b4a 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json @@ -87,12 +87,13 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "150", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.2", "line_width": "0.42", @@ -248,6 +249,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.0.2.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json index 4f2ba17308..80366cfe6b 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json @@ -87,12 +87,13 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "150", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.2", "line_width": "0.42", @@ -248,6 +249,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.0.2.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json index 6cd017a2a2..6344696c95 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json @@ -87,12 +87,13 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.2", "line_width": "0.42", @@ -248,6 +249,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.0.2.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json index 205850caa9..7c611624e1 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json @@ -87,12 +87,13 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.2", "line_width": "0.42", @@ -248,6 +249,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.0.2.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json index 3c82b8e353..888f71c411 100644 --- a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json @@ -7,7 +7,8 @@ "bottom_shell_layers": "3", "default_acceleration": "10000", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", - "gap_infill_speed": "200", + "gap_infill_speed": "250", + "is_custom_defined": "0", "print_settings_id": "0.20mm Strength @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", "support_style": "default", @@ -17,6 +18,7 @@ "travel_speed": "500", "tree_support_branch_diameter_angle": "15", "tree_support_branch_diameter_double_wall": "1", + "version": "2.1.2.2", "outer_wall_speed": "60", "wall_loops": "6", "accel_to_decel_enable": "1", @@ -30,7 +32,7 @@ "bridge_density": "100%", "bridge_flow": "1", "bridge_no_support": "0", - "bridge_speed": "70", + "bridge_speed": "50", "brim_ears_detection_length": "1", "brim_ears_max_angle": "125", "brim_object_gap": "0", @@ -47,7 +49,7 @@ "detect_thin_wall": "1", "dont_filter_internal_bridges": "disabled", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.15", "elefant_foot_compensation_layers": "1", "enable_arc_fitting": "0", "enable_overhang_speed": "1", @@ -79,7 +81,7 @@ "infill_direction": "45", "infill_jerk": "9", "infill_wall_overlap": "15%", - "initial_layer_acceleration": "0", + "initial_layer_acceleration": "500", "initial_layer_infill_speed": "30", "initial_layer_jerk": "9", "initial_layer_line_width": "0.5", @@ -90,15 +92,15 @@ "inner_wall_acceleration": "0", "inner_wall_jerk": "9", "inner_wall_line_width": "0.45", - "inner_wall_speed": "200", + "inner_wall_speed": "300", "interface_shells": "0", "internal_bridge_flow": "1", "internal_bridge_speed": "150%", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "250", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -118,7 +120,7 @@ "min_feature_size": "25%", "min_length_factor": "0.5", "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "10", + "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", "notes": "", @@ -129,8 +131,8 @@ "outer_wall_jerk": "9", "outer_wall_line_width": "0.42", "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", @@ -191,11 +193,11 @@ "small_perimeter_threshold": "0", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", + "sparse_infill_density": "25%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "200", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "270", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", "spiral_mode_smooth": "0", @@ -228,12 +230,12 @@ "thick_internal_bridges": "1", "timelapse_type": "0", "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "0", + "top_surface_acceleration": "2000", "top_surface_jerk": "9", "top_surface_line_width": "0.42", "top_surface_pattern": "monotonic", - "top_surface_speed": "100", - "travel_acceleration": "0", + "top_surface_speed": "200", + "travel_acceleration": "10000", "travel_jerk": "12", "travel_speed_z": "0", "tree_support_adaptive_layer_height": "1", @@ -280,5 +282,5 @@ ], "xy_contour_compensation": "0", "xy_hole_compensation": "0", - "top_bottom_infill_wall_overlap": "15%" + "top_bottom_infill_wall_overlap": "25%" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json index e11485212b..5c0993e74f 100644 --- a/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json @@ -6,5 +6,6 @@ "instantiation": "true", "outer_wall_speed": "60", "print_settings_id": "0.20mm Strength @Artillery X4Plus 0.4 nozzle", + "version": "2.0.2.0", "wall_loops": "6" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json index 9bc49fa84d..9f2c965213 100644 --- a/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json @@ -6,5 +6,6 @@ "instantiation": "true", "outer_wall_speed": "60", "print_settings_id": "0.20mm Strength @Artillery X4Pro 0.4 nozzle", + "version": "2.0.2.0", "wall_loops": "6" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json index b0bbf7da19..618d984bff 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json @@ -8,6 +8,7 @@ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", "gap_infill_speed": "200", "inner_wall_speed": "300", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.24mm Draft @Artillery M1 Pro 0.4 nozzle", "slow_down_layers": "3", @@ -16,6 +17,7 @@ "top_shell_thickness": "1", "tree_support_branch_diameter_angle": "15", "tree_support_branch_diameter_double_wall": "1", + "version": "2.1.1.0", "initial_layer_print_height": "0.2", "layer_height": "0.24", "accel_to_decel_enable": "1", @@ -96,7 +98,7 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -191,7 +193,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "sparse_infill_speed": "200", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json index e2e13de246..0e31812eba 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json @@ -93,12 +93,13 @@ "internal_solid_infill_line_width": "0.62", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "150", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.24", "line_width": "0.62", @@ -200,7 +201,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "sparse_infill_speed": "100", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", @@ -263,6 +264,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.1.1.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json index 73faaa0416..8752e09ab1 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json @@ -93,12 +93,13 @@ "internal_solid_infill_line_width": "0.82", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "150", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", "ironing_speed": "15", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "layer_height": "0.24", "line_width": "0.82", @@ -200,7 +201,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "sparse_infill_speed": "100", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", @@ -263,6 +264,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "2.1.1.0", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json index b67dedd7cf..848b07af02 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json @@ -7,5 +7,6 @@ "initial_layer_print_height": "0.2", "layer_height": "0.24", "outer_wall_speed": "120", - "print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle" + "print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json index ea118fc33d..5947cb7487 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json @@ -6,5 +6,6 @@ "instantiation": "true", "initial_layer_print_height": "0.2", "layer_height": "0.24", - "print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle" + "print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json index dee34543bf..2c2219020a 100644 --- a/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json @@ -5,5 +5,7 @@ "from": "system", "instantiation": "true", "detect_thin_wall": "0", - "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle" + "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json index cdddaac679..e6dbe92d88 100644 --- a/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json @@ -5,5 +5,7 @@ "from": "system", "instantiation": "true", "bottom_shell_layers": "3", - "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle" + "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json index 82d05cd7f9..3b44014d12 100644 --- a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json @@ -9,6 +9,7 @@ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode", "gap_infill_speed": "200", "initial_layer_infill_speed": "80", + "is_custom_defined": "0", "outer_wall_speed": "200", "print_settings_id": "0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle", "reduce_crossing_wall": "1", @@ -20,6 +21,7 @@ "travel_speed": "500", "tree_support_branch_diameter_angle": "15", "tree_support_branch_diameter_double_wall": "1", + "version": "2.1.1.0", "initial_layer_print_height": "0.2", "layer_height": "0.28", "accel_to_decel_enable": "1", @@ -99,7 +101,7 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", "internal_solid_infill_speed": "300", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "15%", "ironing_pattern": "zig-zag", "ironing_spacing": "0.1", @@ -193,7 +195,7 @@ "sparse_infill_density": "15%", "sparse_infill_filament": "1", "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", + "sparse_infill_pattern": "grid", "sparse_infill_speed": "200", "spiral_mode": "0", "spiral_mode_max_xy_smoothing": "200%", diff --git a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json index 27c259d105..a92c92d8b2 100644 --- a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json @@ -7,5 +7,6 @@ "initial_layer_print_height": "0.2", "layer_height": "0.28", "outer_wall_speed": "120", - "print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle" + "print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json index 8fa494c6bb..cf3de3542f 100644 --- a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json @@ -6,5 +6,6 @@ "instantiation": "true", "initial_layer_print_height": "0.2", "layer_height": "0.28", - "print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle" + "print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle", + "version": "2.0.2.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json index 5ef572b610..8e399a4f45 100644 --- a/resources/profiles/Artillery/process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json @@ -6,5 +6,7 @@ "instantiation": "true", "detect_thin_wall": "0", "layer_height": "0.3", - "print_settings_id": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle" + "print_settings_id": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json index 0f0a856f9b..6124b8de40 100644 --- a/resources/profiles/Artillery/process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json @@ -6,8 +6,10 @@ "instantiation": "true", "initial_layer_infill_speed": "55", "initial_layer_speed": "35", + "is_custom_defined": "0", "layer_height": "0.3", "print_settings_id": "0.30mm Strength @Artillery M1 Pro 0.6 nozzle", "sparse_infill_density": "25%", + "version": "2.1.1.0", "wall_loops": "4" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json index 2ab29f261f..792652e238 100644 --- a/resources/profiles/Artillery/process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json @@ -5,6 +5,8 @@ "from": "system", "instantiation": "true", "bottom_shell_layers": "3", + "is_custom_defined": "0", "layer_height": "0.32", - "print_settings_id": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle" + "print_settings_id": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json index c946d0eb70..d07eba0951 100644 --- a/resources/profiles/Artillery/process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json @@ -2,8 +2,9 @@ "type": "process", "name": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle", "inherits": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle", - "from": "system", "instantiation": "true", + "is_custom_defined": "0", "layer_height": "0.36", - "print_settings_id": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle" + "print_settings_id": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json index fde7dcc99a..a6039be6e0 100644 --- a/resources/profiles/Artillery/process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json @@ -5,6 +5,8 @@ "from": "system", "instantiation": "true", "bottom_shell_layers": "3", + "is_custom_defined": "0", "layer_height": "0.4", - "print_settings_id": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle" + "print_settings_id": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json index 5b67eca303..1e0bd0837e 100644 --- a/resources/profiles/Artillery/process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json @@ -5,5 +5,7 @@ "from": "system", "instantiation": "true", "layer_height": "0.42", - "print_settings_id": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle" + "print_settings_id": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json index adff882f6d..a66ff6e6f8 100644 --- a/resources/profiles/Artillery/process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json @@ -7,5 +7,7 @@ "bottom_shell_layers": "3", "layer_height": "0.48", "print_settings_id": "0.48mm Standard @Artillery M1 Pro 0.8 nozzle", - "slow_down_layers": "3" + "slow_down_layers": "3", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file diff --git a/resources/profiles/Artillery/process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json index 88523c512f..06f2aa5350 100644 --- a/resources/profiles/Artillery/process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json @@ -10,5 +10,7 @@ "support_style": "default", "support_type": "tree(auto)", "tree_support_branch_diameter_angle": "15", - "tree_support_branch_diameter_double_wall": "1" + "tree_support_branch_diameter_double_wall": "1", + "is_custom_defined": "0", + "version": "2.1.1.0" } \ No newline at end of file