3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-15 02:37:51 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Slic3r has been modified to propagate the following filament specific

Browse source 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
This commit is contained in:
bubnikv 2017-06-21 16:15:39 +02:00
parent 0bd2bb1e8e
commit f0325575c2
16 changed files with 180 additions and 135 deletions
Download patch file Download diff file Expand all files Collapse all files

4
lib/Slic3r/GUI/ConfigWizard.pm
View file

@ -66,7 +66,7 @@ sub run {
# set first_layer_bed_temperature to temperature + 5 # set first_layer_bed_temperature to temperature + 5
$self->{config}->set('first_layer_bed_temperature', $self->{config}->set('first_layer_bed_temperature',
($self->{config}->bed_temperature > 0) ? ($self->{config}->bed_temperature + 5) : 0); [ ($self->{config}->bed_temperature->[0] > 0) ? ($self->{config}->bed_temperature->[0] + 5) : 0 ]);
} }
$self->Destroy; $self->Destroy;
@ -364,7 +364,7 @@ sub new {
$self->append_text('Enter the bed temperature needed for getting your filament to stick to your heated bed, then click Next.'); $self->append_text('Enter the bed temperature needed for getting your filament to stick to your heated bed, then click Next.');
$self->append_text('A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed.'); $self->append_text('A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed.');
$self->append_option('bed_temperature'); $self->append_option('bed_temperature#0');
return $self; return $self;
} }

47
lib/Slic3r/GUI/Tab.pm
View file

@ -1078,8 +1078,8 @@ sub build {
my $line = Slic3r::GUI::OptionsGroup::Line->new( my $line = Slic3r::GUI::OptionsGroup::Line->new(
label => 'Bed', label => 'Bed',
); );
$line->append_option($optgroup->get_option('first_layer_bed_temperature')); $line->append_option($optgroup->get_option('first_layer_bed_temperature', 0));
$line->append_option($optgroup->get_option('bed_temperature')); $line->append_option($optgroup->get_option('bed_temperature', 0));
$optgroup->append_line($line); $optgroup->append_line($line);
} }
} }
@ -1089,8 +1089,8 @@ sub build {
my $page = $self->add_options_page('Cooling', 'hourglass.png'); my $page = $self->add_options_page('Cooling', 'hourglass.png');
{ {
my $optgroup = $page->new_optgroup('Enable'); my $optgroup = $page->new_optgroup('Enable');
$optgroup->append_single_option_line('fan_always_on'); $optgroup->append_single_option_line('fan_always_on', 0);
$optgroup->append_single_option_line('cooling'); $optgroup->append_single_option_line('cooling', 0);
my $line = Slic3r::GUI::OptionsGroup::Line->new( my $line = Slic3r::GUI::OptionsGroup::Line->new(
label => '', label => '',
@ -1109,21 +1109,21 @@ sub build {
my $line = Slic3r::GUI::OptionsGroup::Line->new( my $line = Slic3r::GUI::OptionsGroup::Line->new(
label => 'Fan speed', label => 'Fan speed',
); );
$line->append_option($optgroup->get_option('min_fan_speed')); $line->append_option($optgroup->get_option('min_fan_speed', 0));
$line->append_option($optgroup->get_option('max_fan_speed')); $line->append_option($optgroup->get_option('max_fan_speed', 0));
$optgroup->append_line($line); $optgroup->append_line($line);
} }
$optgroup->append_single_option_line('bridge_fan_speed'); $optgroup->append_single_option_line('bridge_fan_speed', 0);
$optgroup->append_single_option_line('disable_fan_first_layers'); $optgroup->append_single_option_line('disable_fan_first_layers', 0);
} }
{ {
my $optgroup = $page->new_optgroup('Cooling thresholds', my $optgroup = $page->new_optgroup('Cooling thresholds',
label_width => 250, label_width => 250,
); );
$optgroup->append_single_option_line('fan_below_layer_time'); $optgroup->append_single_option_line('fan_below_layer_time', 0);
$optgroup->append_single_option_line('slowdown_below_layer_time'); $optgroup->append_single_option_line('slowdown_below_layer_time', 0);
$optgroup->append_single_option_line('min_print_speed'); $optgroup->append_single_option_line('min_print_speed', 0);
} }
} }
@ -1182,10 +1182,11 @@ sub _update {
$self->_update_description; $self->_update_description;
my $cooling = $self->{config}->cooling; my $cooling = $self->{config}->cooling->[0];
$self->get_field($_)->toggle($cooling) my $fan_always_on = $cooling || $self->{config}->fan_always_on->[0];
$self->get_field($_, 0)->toggle($cooling)
for qw(max_fan_speed fan_below_layer_time slowdown_below_layer_time min_print_speed); for qw(max_fan_speed fan_below_layer_time slowdown_below_layer_time min_print_speed);
$self->get_field($_)->toggle($cooling || $self->{config}->fan_always_on) $self->get_field($_, 0)->toggle($fan_always_on)
for qw(min_fan_speed disable_fan_first_layers); for qw(min_fan_speed disable_fan_first_layers);
} }
@ -1195,21 +1196,21 @@ sub _update_description {
my $config = $self->config; my $config = $self->config;
my $msg = ""; my $msg = "";
my $fan_other_layers = $config->fan_always_on my $fan_other_layers = $config->fan_always_on->[0]
? sprintf "will always run at %d%%%s.", $config->min_fan_speed, ? sprintf "will always run at %d%%%s.", $config->min_fan_speed->[0],
($config->disable_fan_first_layers > 1 ($config->disable_fan_first_layers->[0] > 1
? " except for the first " . $config->disable_fan_first_layers . " layers" ? " except for the first " . $config->disable_fan_first_layers->[0] . " layers"
: $config->disable_fan_first_layers == 1 : $config->disable_fan_first_layers->[0] == 1
? " except for the first layer" ? " except for the first layer"
: "") : "")
: "will be turned off."; : "will be turned off.";
if ($config->cooling) { if ($config->cooling->[0]) {
$msg = sprintf "If estimated layer time is below ~%ds, fan will run at %d%% and print speed will be reduced so that no less than %ds are spent on that layer (however, speed will never be reduced below %dmm/s).", $msg = sprintf "If estimated layer time is below ~%ds, fan will run at %d%% and print speed will be reduced so that no less than %ds are spent on that layer (however, speed will never be reduced below %dmm/s).",
$config->slowdown_below_layer_time, $config->max_fan_speed, $config->slowdown_below_layer_time, $config->min_print_speed; $config->slowdown_below_layer_time->[0], $config->max_fan_speed->[0], $config->slowdown_below_layer_time->[0], $config->min_print_speed->[0];
if ($config->fan_below_layer_time > $config->slowdown_below_layer_time) { if ($config->fan_below_layer_time->[0] > $config->slowdown_below_layer_time->[0]) {
$msg .= sprintf "\nIf estimated layer time is greater, but still below ~%ds, fan will run at a proportionally decreasing speed between %d%% and %d%%.", $msg .= sprintf "\nIf estimated layer time is greater, but still below ~%ds, fan will run at a proportionally decreasing speed between %d%% and %d%%.",
$config->fan_below_layer_time, $config->max_fan_speed, $config->min_fan_speed; $config->fan_below_layer_time->[0], $config->max_fan_speed->[0], $config->min_fan_speed->[0];
} }
$msg .= "\nDuring the other layers, fan $fan_other_layers" $msg .= "\nDuring the other layers, fan $fan_other_layers"
} else { } else {

16
slic3r.pl
View file

@ -315,7 +315,7 @@ $j
--temperature Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0]) --temperature Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0])
--first-layer-temperature Extrusion temperature for the first layer, in degree Celsius, --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
set 0 to disable (default: same as --temperature) set 0 to disable (default: same as --temperature)
--bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}) --bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}[0])
--first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius, --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
set 0 to disable (default: same as --bed-temperature) set 0 to disable (default: same as --bed-temperature)
@ -464,15 +464,15 @@ $j
Cooling options: Cooling options:
--cooling Enable fan and cooling control --cooling Enable fan and cooling control
--min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}%) --min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}[0]%)
--max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}%) --max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}[0]%)
--bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}%) --bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}[0]%)
--fan-below-layer-time Enable fan if layer print time is below this approximate number --fan-below-layer-time Enable fan if layer print time is below this approximate number
of seconds (default: $config->{fan_below_layer_time}) of seconds (default: $config->{fan_below_layer_time}[0])
--slowdown-below-layer-time Slow down if layer print time is below this approximate number --slowdown-below-layer-time Slow down if layer print time is below this approximate number
of seconds (default: $config->{slowdown_below_layer_time}) of seconds (default: $config->{slowdown_below_layer_time}[0])
--min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed}) --min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed}[0])
--disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}) --disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}[0])
--fan-always-on Keep fan always on at min fan speed, even for layers that don't need --fan-always-on Keep fan always on at min fan speed, even for layers that don't need
cooling cooling

32
t/cooling.t
View file

@ -27,18 +27,18 @@ sub buffer {
} }
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('disable_fan_first_layers', 0); $config->set('disable_fan_first_layers', [ 0 ]);
{ {
my $buffer = buffer($config); my $buffer = buffer($config);
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time + 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time->[0] + 1);
my $gcode = $buffer->append('G1 F3000;_EXTRUDE_SET_SPEED\nG1 X100 E1', 0, 0, 0) . $buffer->flush; my $gcode = $buffer->append('G1 F3000;_EXTRUDE_SET_SPEED\nG1 X100 E1', 0, 0, 0) . $buffer->flush;
like $gcode, qr/F3000/, 'speed is not altered when elapsed time is greater than slowdown threshold'; like $gcode, qr/F3000/, 'speed is not altered when elapsed time is greater than slowdown threshold';
} }
{ {
my $buffer = buffer($config); my $buffer = buffer($config);
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time - 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time->[0] - 1);
my $gcode = $buffer->append( my $gcode = $buffer->append(
"G1 X50 F2500\n" . "G1 X50 F2500\n" .
"G1 F3000;_EXTRUDE_SET_SPEED\n" . "G1 F3000;_EXTRUDE_SET_SPEED\n" .
@ -53,7 +53,7 @@ $config->set('disable_fan_first_layers', 0);
{ {
my $buffer = buffer($config); my $buffer = buffer($config);
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time + 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time->[0] + 1);
my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0) . $buffer->flush; my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0) . $buffer->flush;
unlike $gcode, qr/M106/, 'fan is not activated when elapsed time is greater than fan threshold'; unlike $gcode, qr/M106/, 'fan is not activated when elapsed time is greater than fan threshold';
} }
@ -63,7 +63,7 @@ $config->set('disable_fan_first_layers', 0);
my $gcode = ""; my $gcode = "";
for my $obj_id (0 .. 1) { for my $obj_id (0 .. 1) {
# use an elapsed time which is < the slowdown threshold but greater than it when summed twice # use an elapsed time which is < the slowdown threshold but greater than it when summed twice
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time - 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->slowdown_below_layer_time->[0] - 1);
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, 0, 0); $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, 0, 0);
} }
$gcode .= $buffer->flush; $gcode .= $buffer->flush;
@ -76,7 +76,7 @@ $config->set('disable_fan_first_layers', 0);
for my $layer_id (0 .. 1) { for my $layer_id (0 .. 1) {
for my $obj_id (0 .. 1) { for my $obj_id (0 .. 1) {
# use an elapsed time which is < the threshold but greater than it when summed twice # use an elapsed time which is < the threshold but greater than it when summed twice
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time - 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time->[0] - 1);
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0); $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0);
} }
} }
@ -90,7 +90,7 @@ $config->set('disable_fan_first_layers', 0);
for my $layer_id (0 .. 1) { for my $layer_id (0 .. 1) {
for my $obj_id (0 .. 1) { for my $obj_id (0 .. 1) {
# use an elapsed time which is < the threshold even when summed twice # use an elapsed time which is < the threshold even when summed twice
$buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time/2 - 1); $buffer->gcodegen->set_elapsed_time($buffer->gcodegen->config->fan_below_layer_time->[0]/2 - 1);
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0); $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0);
} }
} }
@ -100,10 +100,10 @@ $config->set('disable_fan_first_layers', 0);
{ {
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('cooling', 1); $config->set('cooling', [ 1 ]);
$config->set('bridge_fan_speed', 100); $config->set('bridge_fan_speed', [ 100 ]);
$config->set('fan_below_layer_time', 0); $config->set('fan_below_layer_time', [ 0 ]);
$config->set('slowdown_below_layer_time', 0); $config->set('slowdown_below_layer_time', [ 0 ]);
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('top_solid_layers', 1); # internal bridges use solid_infil speed $config->set('top_solid_layers', 1); # internal bridges use solid_infil speed
$config->set('bottom_solid_layers', 1); # internal bridges use solid_infil speed $config->set('bottom_solid_layers', 1); # internal bridges use solid_infil speed
@ -134,10 +134,10 @@ $config->set('disable_fan_first_layers', 0);
{ {
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('cooling', 1); $config->set('cooling', [ 1 ]);
$config->set('fan_below_layer_time', 0); $config->set('fan_below_layer_time', [ 0 ]);
$config->set('slowdown_below_layer_time', 10); $config->set('slowdown_below_layer_time', [ 10 ]);
$config->set('min_print_speed', 0); $config->set('min_print_speed', [ 0 ]);
$config->set('start_gcode', ''); $config->set('start_gcode', '');
my $print = Slic3r::Test::init_print('20mm_cube', config => $config); my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@ -152,7 +152,7 @@ $config->set('disable_fan_first_layers', 0);
$layer_times[-1] += abs($info->{dist_XY} || $info->{dist_E} || $info->{dist_Z} || 0) / ($args->{F} // $self->F) * 60; $layer_times[-1] += abs($info->{dist_XY} || $info->{dist_E} || $info->{dist_Z} || 0) / ($args->{F} // $self->F) * 60;
} }
}); });
my $all_below = !defined first { $_ > 0 && $_ < $config->slowdown_below_layer_time } @layer_times; my $all_below = !defined first { $_ > 0 && $_ < $config->slowdown_below_layer_time->[0] } @layer_times;
ok $all_below, 'slowdown_below_layer_time is honored'; ok $all_below, 'slowdown_below_layer_time is honored';
} }

4
t/fill.t
View file

@ -199,7 +199,7 @@ for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
$config->set('infill_extruder', 2); $config->set('infill_extruder', 2);
$config->set('infill_extrusion_width', 0.5); $config->set('infill_extrusion_width', 0.5);
$config->set('fill_density', 40); $config->set('fill_density', 40);
$config->set('cooling', 0); # for preventing speeds from being altered $config->set('cooling', [ 0 ]); # for preventing speeds from being altered
$config->set('first_layer_speed', '100%'); # for preventing speeds from being altered $config->set('first_layer_speed', '100%'); # for preventing speeds from being altered
my $test = sub { my $test = sub {
@ -249,7 +249,7 @@ for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
$config->set('solid_infill_every_layers', 2); $config->set('solid_infill_every_layers', 2);
$config->set('perimeter_speed', 99); $config->set('perimeter_speed', 99);
$config->set('external_perimeter_speed', 99); $config->set('external_perimeter_speed', 99);
$config->set('cooling', 0); $config->set('cooling', [ 0 ]);
$config->set('first_layer_speed', '100%'); $config->set('first_layer_speed', '100%');
my $print = Slic3r::Test::init_print('20mm_cube', config => $config); my $print = Slic3r::Test::init_print('20mm_cube', config => $config);

2
t/flow.t
View file

@ -43,7 +43,7 @@ use Slic3r::Test;
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('bridge_flow_ratio', 1); $config->set('bridge_flow_ratio', 1);
$config->set('cooling', 0); # to prevent speeds from being altered $config->set('cooling', [ 0 ]); # to prevent speeds from being altered
$config->set('first_layer_speed', '100%'); # to prevent speeds from being altered $config->set('first_layer_speed', '100%'); # to prevent speeds from being altered
my $test = sub { my $test = sub {

2
t/gaps.t
View file

@ -23,7 +23,7 @@ use Slic3r::Test;
$config->set('small_perimeter_speed', 66); $config->set('small_perimeter_speed', 66);
$config->set('gap_fill_speed', 99); $config->set('gap_fill_speed', 99);
$config->set('perimeters', 1); $config->set('perimeters', 1);
$config->set('cooling', 0); # to prevent speeds from being altered $config->set('cooling', [ 0 ]); # to prevent speeds from being altered
$config->set('first_layer_speed', '100%'); # to prevent speeds from being altered $config->set('first_layer_speed', '100%'); # to prevent speeds from being altered
$config->set('perimeter_extrusion_width', 0.35); $config->set('perimeter_extrusion_width', 0.35);
$config->set('first_layer_extrusion_width', 0.35); $config->set('first_layer_extrusion_width', 0.35);

2
t/multi.t
View file

@ -128,7 +128,7 @@ use Slic3r::Test;
$config->set('fill_density', 0); $config->set('fill_density', 0);
$config->set('solid_infill_speed', 99); $config->set('solid_infill_speed', 99);
$config->set('top_solid_infill_speed', 99); $config->set('top_solid_infill_speed', 99);
$config->set('cooling', 0); # for preventing speeds from being altered $config->set('cooling', [ 0 ]); # for preventing speeds from being altered
$config->set('first_layer_speed', '100%'); # for preventing speeds from being altered $config->set('first_layer_speed', '100%'); # for preventing speeds from being altered
my $test = sub { my $test = sub {

14
t/perimeters.t
View file

@ -161,7 +161,7 @@ use Slic3r::Test;
$config->set('perimeters', 3); $config->set('perimeters', 3);
$config->set('top_solid_layers', 0); $config->set('top_solid_layers', 0);
$config->set('bottom_solid_layers', 0); $config->set('bottom_solid_layers', 0);
$config->set('cooling', 0); # to prevent speeds from being altered $config->set('cooling', [ 0 ]); # to prevent speeds from being altered
$config->set('first_layer_speed', '100%'); # to prevent speeds from being altered $config->set('first_layer_speed', '100%'); # to prevent speeds from being altered
{ {
@ -242,10 +242,10 @@ use Slic3r::Test;
$config->set('perimeter_speed', 77); $config->set('perimeter_speed', 77);
$config->set('external_perimeter_speed', 66); $config->set('external_perimeter_speed', 66);
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('cooling', 1); $config->set('cooling', [ 1 ]);
$config->set('fan_below_layer_time', 0); $config->set('fan_below_layer_time', [ 0 ]);
$config->set('slowdown_below_layer_time', 0); $config->set('slowdown_below_layer_time', [ 0 ]);
$config->set('bridge_fan_speed', 100); $config->set('bridge_fan_speed', [ 100 ]);
$config->set('bridge_flow_ratio', 33); # arbitrary value $config->set('bridge_flow_ratio', 33); # arbitrary value
$config->set('overhangs', 1); $config->set('overhangs', 1);
my $print = Slic3r::Test::init_print('overhang', config => $config); my $print = Slic3r::Test::init_print('overhang', config => $config);
@ -289,7 +289,7 @@ use Slic3r::Test;
$config->set('layer_height', 0.4); $config->set('layer_height', 0.4);
$config->set('first_layer_height', 0.35); $config->set('first_layer_height', 0.35);
$config->set('extra_perimeters', 1); $config->set('extra_perimeters', 1);
$config->set('cooling', 0); # to prevent speeds from being altered $config->set('cooling', [ 0 ]); # to prevent speeds from being altered
$config->set('first_layer_speed', '100%'); # to prevent speeds from being altered $config->set('first_layer_speed', '100%'); # to prevent speeds from being altered
$config->set('perimeter_speed', 99); $config->set('perimeter_speed', 99);
$config->set('external_perimeter_speed', 99); $config->set('external_perimeter_speed', 99);
@ -377,7 +377,7 @@ use Slic3r::Test;
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('fill_density', 0); # to prevent bridging over sparse infill $config->set('fill_density', 0); # to prevent bridging over sparse infill
$config->set('overhangs', 1); $config->set('overhangs', 1);
$config->set('cooling', 0); # to prevent speeds from being altered $config->set('cooling', [ 0 ]); # to prevent speeds from being altered
$config->set('first_layer_speed', '100%'); # to prevent speeds from being altered $config->set('first_layer_speed', '100%'); # to prevent speeds from being altered
my $test = sub { my $test = sub {

8
t/shells.t
View file

@ -20,7 +20,7 @@ use Slic3r::Test;
$config->set('top_solid_infill_speed', 99); $config->set('top_solid_infill_speed', 99);
$config->set('bridge_speed', 72); $config->set('bridge_speed', 72);
$config->set('first_layer_speed', '100%'); $config->set('first_layer_speed', '100%');
$config->set('cooling', 0); $config->set('cooling', [ 0 ]);
my $test = sub { my $test = sub {
my ($conf) = @_; my ($conf) = @_;
@ -86,7 +86,7 @@ use Slic3r::Test;
$config->set('first_layer_height', '100%'); $config->set('first_layer_height', '100%');
$config->set('bottom_solid_layers', 0); $config->set('bottom_solid_layers', 0);
$config->set('top_solid_layers', 3); $config->set('top_solid_layers', 3);
$config->set('cooling', 0); $config->set('cooling', [ 0 ]);
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('solid_infill_speed', 99); $config->set('solid_infill_speed', 99);
$config->set('top_solid_infill_speed', 99); $config->set('top_solid_infill_speed', 99);
@ -115,7 +115,7 @@ use Slic3r::Test;
# discarded instead of grown # discarded instead of grown
$config->set('perimeters', 1); $config->set('perimeters', 1);
$config->set('fill_density', 0); $config->set('fill_density', 0);
$config->set('cooling', 0); # prevent speed alteration $config->set('cooling', [ 0 ]); # prevent speed alteration
$config->set('first_layer_speed', '100%'); # prevent speed alteration $config->set('first_layer_speed', '100%'); # prevent speed alteration
$config->set('layer_height', 0.4); $config->set('layer_height', 0.4);
$config->set('first_layer_height', '100%'); $config->set('first_layer_height', '100%');
@ -138,7 +138,7 @@ use Slic3r::Test;
{ {
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('perimeters', 3); $config->set('perimeters', 3);
$config->set('cooling', 0); # prevent speed alteration $config->set('cooling', [ 0 ]); # prevent speed alteration
$config->set('first_layer_speed', '100%'); # prevent speed alteration $config->set('first_layer_speed', '100%'); # prevent speed alteration
$config->set('layer_height', 0.4); $config->set('layer_height', 0.4);
$config->set('first_layer_height', '100%'); $config->set('first_layer_height', '100%');

6
t/skirt_brim.t
View file

@ -18,7 +18,7 @@ use Slic3r::Test;
$config->set('skirt_height', 2); $config->set('skirt_height', 2);
$config->set('perimeters', 0); $config->set('perimeters', 0);
$config->set('support_material_speed', 99); $config->set('support_material_speed', 99);
$config->set('cooling', 0); # to prevent speeds to be altered $config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered $config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $test = sub { my $test = sub {
@ -52,7 +52,7 @@ use Slic3r::Test;
$config->set('bottom_solid_layers', 0); # to prevent solid shells and their speeds $config->set('bottom_solid_layers', 0); # to prevent solid shells and their speeds
$config->set('brim_width', 5); $config->set('brim_width', 5);
$config->set('support_material_speed', 99); $config->set('support_material_speed', 99);
$config->set('cooling', 0); # to prevent speeds to be altered $config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered $config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $print = Slic3r::Test::init_print('20mm_cube', config => $config); my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@ -97,7 +97,7 @@ use Slic3r::Test;
$config->set('support_material_speed', 99); $config->set('support_material_speed', 99);
$config->set('perimeter_extruder', 1); $config->set('perimeter_extruder', 1);
$config->set('support_material_extruder', 2); $config->set('support_material_extruder', 2);
$config->set('cooling', 0); # to prevent speeds to be altered $config->set('cooling', [ 0 ]); # to prevent speeds to be altered
$config->set('first_layer_speed', '100%'); # to prevent speeds to be altered $config->set('first_layer_speed', '100%'); # to prevent speeds to be altered
my $print = Slic3r::Test::init_print('overhang', config => $config); my $print = Slic3r::Test::init_print('overhang', config => $config);

4
t/support.t
View file

@ -114,7 +114,7 @@ use Slic3r::Test;
$config->set('support_material_extrusion_width', 0.6); $config->set('support_material_extrusion_width', 0.6);
$config->set('first_layer_extrusion_width', '100%'); $config->set('first_layer_extrusion_width', '100%');
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('cooling', 0); # prevent speed alteration $config->set('cooling', [ 0 ]); # prevent speed alteration
$config->set('first_layer_speed', '100%'); # prevent speed alteration $config->set('first_layer_speed', '100%'); # prevent speed alteration
$config->set('start_gcode', ''); # prevent any unexpected Z move $config->set('start_gcode', ''); # prevent any unexpected Z move
my $print = Slic3r::Test::init_print('20mm_cube', config => $config); my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@ -197,7 +197,7 @@ use Slic3r::Test;
$config->set('support_material', 1); $config->set('support_material', 1);
$config->set('top_solid_layers', 0); # so that we don't have the internal bridge over infill $config->set('top_solid_layers', 0); # so that we don't have the internal bridge over infill
$config->set('bridge_speed', 99); $config->set('bridge_speed', 99);
$config->set('cooling', 0); $config->set('cooling', [ 0 ]);
$config->set('first_layer_speed', '100%'); $config->set('first_layer_speed', '100%');
my $test = sub { my $test = sub {

18
xs/src/libslic3r/GCode.cpp
View file

@ -445,14 +445,14 @@ bool GCode::do_export(FILE *file, Print &print)
m_placeholder_parser.update_timestamp(); m_placeholder_parser.update_timestamp();
// Disable fan. // Disable fan.
if (print.config.cooling.value && print.config.disable_fan_first_layers.value) if (print.config.cooling.values.front() && print.config.disable_fan_first_layers.values.front())
write(file, m_writer.set_fan(0, true)); write(file, m_writer.set_fan(0, true));
// Set bed temperature if the start G-code does not contain any bed temp control G-codes. // Set bed temperature if the start G-code does not contain any bed temp control G-codes.
if (print.config.first_layer_bed_temperature.value > 0 && if (print.config.first_layer_bed_temperature.values.front() > 0 &&
boost::ifind_first(print.config.start_gcode.value, std::string("M140")).empty() && boost::ifind_first(print.config.start_gcode.value, std::string("M140")).empty() &&
boost::ifind_first(print.config.start_gcode.value, std::string("M190")).empty()) boost::ifind_first(print.config.start_gcode.value, std::string("M190")).empty())
write(file, m_writer.set_bed_temperature(print.config.first_layer_bed_temperature.value, true)); write(file, m_writer.set_bed_temperature(print.config.first_layer_bed_temperature.values.front(), true));
// Get optimal tool ordering to minimize tool switches of a multi-exruder print. // Get optimal tool ordering to minimize tool switches of a multi-exruder print.
// For a print by objects, find the 1st printing object. // For a print by objects, find the 1st printing object.
@ -582,8 +582,8 @@ bool GCode::do_export(FILE *file, Print &print)
// Ff we are printing the bottom layer of an object, and we have already finished // Ff we are printing the bottom layer of an object, and we have already finished
// another one, set first layer temperatures. This happens before the Z move // another one, set first layer temperatures. This happens before the Z move
// is triggered, so machine has more time to reach such temperatures. // is triggered, so machine has more time to reach such temperatures.
if (print.config.first_layer_bed_temperature.value > 0) if (print.config.first_layer_bed_temperature.values.front() > 0)
write(file, m_writer.set_bed_temperature(print.config.first_layer_bed_temperature)); write(file, m_writer.set_bed_temperature(print.config.first_layer_bed_temperature.values.front()));
// Set first layer extruder. // Set first layer extruder.
this->_print_first_layer_extruder_temperatures(file, print, initial_extruder_id, false); this->_print_first_layer_extruder_temperatures(file, print, initial_extruder_id, false);
} }
@ -819,8 +819,8 @@ void GCode::process_layer(
if (temperature > 0 && temperature != print.config.first_layer_temperature.get_at(extruder.id)) if (temperature > 0 && temperature != print.config.first_layer_temperature.get_at(extruder.id))
gcode += m_writer.set_temperature(temperature, false, extruder.id); gcode += m_writer.set_temperature(temperature, false, extruder.id);
} }
if (print.config.bed_temperature.value > 0 && print.config.bed_temperature != print.config.first_layer_bed_temperature.value) if (print.config.bed_temperature.values.front() > 0 && print.config.bed_temperature.values.front() != print.config.first_layer_bed_temperature.values.front())
gcode += m_writer.set_bed_temperature(print.config.bed_temperature); gcode += m_writer.set_bed_temperature(print.config.bed_temperature.values.front());
// Mark the temperature transition from 1st to 2nd layer to be finished. // Mark the temperature transition from 1st to 2nd layer to be finished.
m_second_layer_things_done = true; m_second_layer_things_done = true;
} }
@ -1861,7 +1861,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
this->set_last_pos(path.last_point()); this->set_last_pos(path.last_point());
if (m_config.cooling) if (m_config.cooling.values.front())
m_elapsed_time += path_length / F * 60.f; m_elapsed_time += path_length / F * 60.f;
return gcode; return gcode;
@ -1913,7 +1913,7 @@ std::string GCode::travel_to(const Point &point, ExtrusionRole role, std::string
factor on the whole elapsed time but only alters non-travel moves, thus the resulting factor on the whole elapsed time but only alters non-travel moves, thus the resulting
time is still shorter than the configured threshold. We could create a new time is still shorter than the configured threshold. We could create a new
elapsed_travel_time but we would still need to account for bridges, retractions, wipe etc. elapsed_travel_time but we would still need to account for bridges, retractions, wipe etc.
if (m_config.cooling) if (m_config.cooling.values.front())
m_elapsed_time += unscale(travel.length()) / m_config.get_abs_value("travel_speed"); m_elapsed_time += unscale(travel.length()) / m_config.get_abs_value("travel_speed");
*/ */

28
xs/src/libslic3r/GCode/CoolingBuffer.cpp
View file

@ -59,25 +59,25 @@ std::string CoolingBuffer::flush()
m_gcode.clear(); m_gcode.clear();
m_elapsed_time = 0.; m_elapsed_time = 0.;
int fan_speed = config.fan_always_on ? config.min_fan_speed.value : 0; int fan_speed = config.fan_always_on.values.front() ? config.min_fan_speed.values.front() : 0;
float speed_factor = 1.0; float speed_factor = 1.0;
if (config.cooling) { if (config.cooling.values.front()) {
#ifdef SLIC3R_DEBUG #ifdef SLIC3R_DEBUG
printf("Layer %zu estimated printing time: %f seconds\n", m_layer_id, elapsed); printf("Layer %zu estimated printing time: %f seconds\n", m_layer_id, elapsed);
#endif #endif
if (elapsed < (float)config.slowdown_below_layer_time) { if (elapsed < (float)config.slowdown_below_layer_time.values.front()) {
// Layer time very short. Enable the fan to a full throttle and slow down the print // Layer time very short. Enable the fan to a full throttle and slow down the print
// (stretch the layer print time to slowdown_below_layer_time). // (stretch the layer print time to slowdown_below_layer_time).
fan_speed = config.max_fan_speed; fan_speed = config.max_fan_speed.values.front();
speed_factor = elapsed / (float)config.slowdown_below_layer_time; speed_factor = elapsed / (float)config.slowdown_below_layer_time.values.front();
} else if (elapsed < (float)config.fan_below_layer_time) { } else if (elapsed < (float)config.fan_below_layer_time.values.front()) {
// Layer time quite short. Enable the fan proportionally according to the current layer time. // Layer time quite short. Enable the fan proportionally according to the current layer time.
fan_speed = config.max_fan_speed fan_speed = config.max_fan_speed.values.front()
- (config.max_fan_speed - config.min_fan_speed) - (config.max_fan_speed.values.front() - config.min_fan_speed.values.front())
* (elapsed - (float)config.slowdown_below_layer_time) * (elapsed - (float)config.slowdown_below_layer_time.values.front())
/ (config.fan_below_layer_time - config.slowdown_below_layer_time); / (config.fan_below_layer_time.values.front() - config.slowdown_below_layer_time.values.front());
} }
#ifdef SLIC3R_DEBUG #ifdef SLIC3R_DEBUG
@ -92,7 +92,7 @@ std::string CoolingBuffer::flush()
std::istringstream ss(gcode); std::istringstream ss(gcode);
std::string line; std::string line;
bool bridge_fan_start = false; bool bridge_fan_start = false;
float min_print_speed = float(config.min_print_speed * 60.); float min_print_speed = float(config.min_print_speed.values.front() * 60.);
while (std::getline(ss, line)) { while (std::getline(ss, line)) {
if (boost::starts_with(line, "G1") if (boost::starts_with(line, "G1")
&& boost::contains(line, ";_EXTRUDE_SET_SPEED") && boost::contains(line, ";_EXTRUDE_SET_SPEED")
@ -107,17 +107,17 @@ std::string CoolingBuffer::flush()
gcode = new_gcode; gcode = new_gcode;
} }
} }
if (m_layer_id < config.disable_fan_first_layers) if (m_layer_id < config.disable_fan_first_layers.values.front())
fan_speed = 0; fan_speed = 0;
gcode = m_gcodegen.writer().set_fan(fan_speed) + gcode; gcode = m_gcodegen.writer().set_fan(fan_speed) + gcode;
// bridge fan speed // bridge fan speed
if (!config.cooling || config.bridge_fan_speed == 0 || m_layer_id < config.disable_fan_first_layers) { if (!config.cooling.values.front() || config.bridge_fan_speed.values.front() == 0 || m_layer_id < config.disable_fan_first_layers.values.front()) {
boost::replace_all(gcode, ";_BRIDGE_FAN_START", ""); boost::replace_all(gcode, ";_BRIDGE_FAN_START", "");
boost::replace_all(gcode, ";_BRIDGE_FAN_END", ""); boost::replace_all(gcode, ";_BRIDGE_FAN_END", "");
} else { } else {
boost::replace_all(gcode, ";_BRIDGE_FAN_START", m_gcodegen.writer().set_fan(config.bridge_fan_speed, true)); boost::replace_all(gcode, ";_BRIDGE_FAN_START", m_gcodegen.writer().set_fan(config.bridge_fan_speed.values.front(), true));
boost::replace_all(gcode, ";_BRIDGE_FAN_END", m_gcodegen.writer().set_fan(fan_speed, true)); boost::replace_all(gcode, ";_BRIDGE_FAN_END", m_gcodegen.writer().set_fan(fan_speed, true));
} }
boost::replace_all(gcode, ";_WIPE", ""); boost::replace_all(gcode, ";_WIPE", "");

106
xs/src/libslic3r/PrintConfig.cpp
View file

@ -26,14 +26,18 @@ PrintConfigDef::PrintConfigDef()
def->default_value = opt; def->default_value = opt;
} }
def = this->add("bed_temperature", coInt); def = this->add("bed_temperature", coInts);
def->label = "Other layers"; def->label = "Other layers";
def->tooltip = "Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output."; def->tooltip = "Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output.";
def->cli = "bed-temperature=i"; def->cli = "bed-temperature=i@";
def->full_label = "Bed temperature"; def->full_label = "Bed temperature";
def->min = 0; def->min = 0;
def->max = 300; def->max = 300;
def->default_value = new ConfigOptionInt(0); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(0);
def->default_value = opt;
}
def = this->add("before_layer_gcode", coString); def = this->add("before_layer_gcode", coString);
def->label = "Before layer change G-code"; def->label = "Before layer change G-code";
@ -61,14 +65,18 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(0); def->default_value = new ConfigOptionFloat(0);
def = this->add("bridge_fan_speed", coInt); def = this->add("bridge_fan_speed", coInts);
def->label = "Bridges fan speed"; def->label = "Bridges fan speed";
def->tooltip = "This fan speed is enforced during all bridges and overhangs."; def->tooltip = "This fan speed is enforced during all bridges and overhangs.";
def->sidetext = "%"; def->sidetext = "%";
def->cli = "bridge-fan-speed=i"; def->cli = "bridge-fan-speed=i@";
def->min = 0; def->min = 0;
def->max = 100; def->max = 100;
def->default_value = new ConfigOptionInt(100); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(100);
def->default_value = opt;
}
def = this->add("bridge_flow_ratio", coFloat); def = this->add("bridge_flow_ratio", coFloat);
def->label = "Bridge flow ratio"; def->label = "Bridge flow ratio";
@ -108,11 +116,15 @@ PrintConfigDef::PrintConfigDef()
def->cli = "complete-objects!"; def->cli = "complete-objects!";
def->default_value = new ConfigOptionBool(false); def->default_value = new ConfigOptionBool(false);
def = this->add("cooling", coBool); def = this->add("cooling", coBools);
def->label = "Enable auto cooling"; def->label = "Enable auto cooling";
def->tooltip = "This flag enables the automatic cooling logic that adjusts print speed and fan speed according to layer printing time."; def->tooltip = "This flag enables the automatic cooling logic that adjusts print speed and fan speed according to layer printing time.";
def->cli = "cooling!"; def->cli = "cooling!";
def->default_value = new ConfigOptionBool(true); {
ConfigOptionBools* opt = new ConfigOptionBools();
opt->values.push_back(true);
def->default_value = opt;
}
def = this->add("default_acceleration", coFloat); def = this->add("default_acceleration", coFloat);
def->label = "Default"; def->label = "Default";
@ -122,14 +134,18 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(0); def->default_value = new ConfigOptionFloat(0);
def = this->add("disable_fan_first_layers", coInt); def = this->add("disable_fan_first_layers", coInts);
def->label = "Disable fan for the first"; def->label = "Disable fan for the first";
def->tooltip = "You can set this to a positive value to disable fan at all during the first layers, so that it does not make adhesion worse."; def->tooltip = "You can set this to a positive value to disable fan at all during the first layers, so that it does not make adhesion worse.";
def->sidetext = "layers"; def->sidetext = "layers";
def->cli = "disable-fan-first-layers=i"; def->cli = "disable-fan-first-layers=i@";
def->min = 0; def->min = 0;
def->max = 1000; def->max = 1000;
def->default_value = new ConfigOptionInt(3); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(3);
def->default_value = opt;
}
def = this->add("dont_support_bridges", coBool); def = this->add("dont_support_bridges", coBool);
def->label = "Don't support bridges"; def->label = "Don't support bridges";
@ -304,21 +320,29 @@ PrintConfigDef::PrintConfigDef()
def->cli = "extrusion-width=s"; def->cli = "extrusion-width=s";
def->default_value = new ConfigOptionFloatOrPercent(0, false); def->default_value = new ConfigOptionFloatOrPercent(0, false);
def = this->add("fan_always_on", coBool); def = this->add("fan_always_on", coBools);
def->label = "Keep fan always on"; def->label = "Keep fan always on";
def->tooltip = "If this is enabled, fan will never be disabled and will be kept running at least at its minimum speed. Useful for PLA, harmful for ABS."; def->tooltip = "If this is enabled, fan will never be disabled and will be kept running at least at its minimum speed. Useful for PLA, harmful for ABS.";
def->cli = "fan-always-on!"; def->cli = "fan-always-on!";
def->default_value = new ConfigOptionBool(false); {
ConfigOptionBools* opt = new ConfigOptionBools();
opt->values.push_back(false);
def->default_value = opt;
}
def = this->add("fan_below_layer_time", coInt); def = this->add("fan_below_layer_time", coInts);
def->label = "Enable fan if layer print time is below"; def->label = "Enable fan if layer print time is below";
def->tooltip = "If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the minimum and maximum speeds."; def->tooltip = "If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the minimum and maximum speeds.";
def->sidetext = "approximate seconds"; def->sidetext = "approximate seconds";
def->cli = "fan-below-layer-time=i"; def->cli = "fan-below-layer-time=i@";
def->width = 60; def->width = 60;
def->min = 0; def->min = 0;
def->max = 1000; def->max = 1000;
def->default_value = new ConfigOptionInt(60); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(60);
def->default_value = opt;
}
def = this->add("filament_colour", coStrings); def = this->add("filament_colour", coStrings);
def->label = "Color"; def->label = "Color";
@ -516,13 +540,17 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(0); def->default_value = new ConfigOptionFloat(0);
def = this->add("first_layer_bed_temperature", coInt); def = this->add("first_layer_bed_temperature", coInts);
def->label = "First layer"; def->label = "First layer";
def->tooltip = "Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output."; def->tooltip = "Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output.";
def->cli = "first-layer-bed-temperature=i"; def->cli = "first-layer-bed-temperature=i@";
def->max = 0; def->max = 0;
def->max = 300; def->max = 300;
def->default_value = new ConfigOptionInt(0); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(0);
def->default_value = opt;
}
def = this->add("first_layer_extrusion_width", coFloatOrPercent); def = this->add("first_layer_extrusion_width", coFloatOrPercent);
def->label = "First layer"; def->label = "First layer";
@ -694,14 +722,18 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(0.3); def->default_value = new ConfigOptionFloat(0.3);
def = this->add("max_fan_speed", coInt); def = this->add("max_fan_speed", coInts);
def->label = "Max"; def->label = "Max";
def->tooltip = "This setting represents the maximum speed of your fan."; def->tooltip = "This setting represents the maximum speed of your fan.";
def->sidetext = "%"; def->sidetext = "%";
def->cli = "max-fan-speed=i"; def->cli = "max-fan-speed=i@";
def->min = 0; def->min = 0;
def->max = 100; def->max = 100;
def->default_value = new ConfigOptionInt(100); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(100);
def->default_value = opt;
}
def = this->add("max_layer_height", coFloats); def = this->add("max_layer_height", coFloats);
def->label = "Max"; def->label = "Max";
@ -749,14 +781,18 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(0); def->default_value = new ConfigOptionFloat(0);
def = this->add("min_fan_speed", coInt); def = this->add("min_fan_speed", coInts);
def->label = "Min"; def->label = "Min";
def->tooltip = "This setting represents the minimum PWM your fan needs to work."; def->tooltip = "This setting represents the minimum PWM your fan needs to work.";
def->sidetext = "%"; def->sidetext = "%";
def->cli = "min-fan-speed=i"; def->cli = "min-fan-speed=i@";
def->min = 0; def->min = 0;
def->max = 100; def->max = 100;
def->default_value = new ConfigOptionInt(35); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(35);
def->default_value = opt;
}
def = this->add("min_layer_height", coFloats); def = this->add("min_layer_height", coFloats);
def->label = "Min"; def->label = "Min";
@ -770,13 +806,17 @@ PrintConfigDef::PrintConfigDef()
def->default_value = opt; def->default_value = opt;
} }
def = this->add("min_print_speed", coFloat); def = this->add("min_print_speed", coFloats);
def->label = "Min print speed"; def->label = "Min print speed";
def->tooltip = "Slic3r will not scale speed down below this speed."; def->tooltip = "Slic3r will not scale speed down below this speed.";
def->sidetext = "mm/s"; def->sidetext = "mm/s";
def->cli = "min-print-speed=f"; def->cli = "min-print-speed=f@";
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionFloat(10); {
ConfigOptionFloats* opt = new ConfigOptionFloats();
opt->values.push_back(10.);
def->default_value = opt;
}
def = this->add("min_skirt_length", coFloat); def = this->add("min_skirt_length", coFloat);
def->label = "Minimum extrusion length"; def->label = "Minimum extrusion length";
@ -1151,15 +1191,19 @@ PrintConfigDef::PrintConfigDef()
def->min = 0; def->min = 0;
def->default_value = new ConfigOptionInt(1); def->default_value = new ConfigOptionInt(1);
def = this->add("slowdown_below_layer_time", coInt); def = this->add("slowdown_below_layer_time", coInts);
def->label = "Slow down if layer print time is below"; def->label = "Slow down if layer print time is below";
def->tooltip = "If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value."; def->tooltip = "If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value.";
def->sidetext = "approximate seconds"; def->sidetext = "approximate seconds";
def->cli = "slowdown-below-layer-time=i"; def->cli = "slowdown-below-layer-time=i@";
def->width = 60; def->width = 60;
def->min = 0; def->min = 0;
def->max = 1000; def->max = 1000;
def->default_value = new ConfigOptionInt(5); {
ConfigOptionInts* opt = new ConfigOptionInts();
opt->values.push_back(5);
def->default_value = opt;
}
def = this->add("small_perimeter_speed", coFloatOrPercent); def = this->add("small_perimeter_speed", coFloatOrPercent);
def->label = "Small perimeters"; def->label = "Small perimeters";

22
xs/src/libslic3r/PrintConfig.hpp
View file

@ -425,35 +425,35 @@ class PrintConfig : public GCodeConfig
public: public:
ConfigOptionBool avoid_crossing_perimeters; ConfigOptionBool avoid_crossing_perimeters;
ConfigOptionPoints bed_shape; ConfigOptionPoints bed_shape;
ConfigOptionInt bed_temperature; ConfigOptionInts bed_temperature;
ConfigOptionFloat bridge_acceleration; ConfigOptionFloat bridge_acceleration;
ConfigOptionInt bridge_fan_speed; ConfigOptionInts bridge_fan_speed;
ConfigOptionFloat brim_width; ConfigOptionFloat brim_width;
ConfigOptionBool complete_objects; ConfigOptionBool complete_objects;
ConfigOptionBool cooling; ConfigOptionBools cooling;
ConfigOptionFloat default_acceleration; ConfigOptionFloat default_acceleration;
ConfigOptionInt disable_fan_first_layers; ConfigOptionInts disable_fan_first_layers;
ConfigOptionFloat duplicate_distance; ConfigOptionFloat duplicate_distance;
ConfigOptionFloat extruder_clearance_height; ConfigOptionFloat extruder_clearance_height;
ConfigOptionFloat extruder_clearance_radius; ConfigOptionFloat extruder_clearance_radius;
ConfigOptionStrings extruder_colour; ConfigOptionStrings extruder_colour;
ConfigOptionPoints extruder_offset; ConfigOptionPoints extruder_offset;
ConfigOptionBool fan_always_on; ConfigOptionBools fan_always_on;
ConfigOptionInt fan_below_layer_time; ConfigOptionInts fan_below_layer_time;
ConfigOptionStrings filament_colour; ConfigOptionStrings filament_colour;
ConfigOptionStrings filament_notes; ConfigOptionStrings filament_notes;
ConfigOptionFloat first_layer_acceleration; ConfigOptionFloat first_layer_acceleration;
ConfigOptionInt first_layer_bed_temperature; ConfigOptionInts first_layer_bed_temperature;
ConfigOptionFloatOrPercent first_layer_extrusion_width; ConfigOptionFloatOrPercent first_layer_extrusion_width;
ConfigOptionFloatOrPercent first_layer_speed; ConfigOptionFloatOrPercent first_layer_speed;
ConfigOptionInts first_layer_temperature; ConfigOptionInts first_layer_temperature;
ConfigOptionFloat infill_acceleration; ConfigOptionFloat infill_acceleration;
ConfigOptionBool infill_first; ConfigOptionBool infill_first;
ConfigOptionInt max_fan_speed; ConfigOptionInts max_fan_speed;
ConfigOptionFloats max_layer_height; ConfigOptionFloats max_layer_height;
ConfigOptionInt min_fan_speed; ConfigOptionInts min_fan_speed;
ConfigOptionFloats min_layer_height; ConfigOptionFloats min_layer_height;
ConfigOptionFloat min_print_speed; ConfigOptionFloats min_print_speed;
ConfigOptionFloat min_skirt_length; ConfigOptionFloat min_skirt_length;
ConfigOptionString notes; ConfigOptionString notes;
ConfigOptionFloats nozzle_diameter; ConfigOptionFloats nozzle_diameter;
@ -469,7 +469,7 @@ public:
ConfigOptionFloat skirt_distance; ConfigOptionFloat skirt_distance;
ConfigOptionInt skirt_height; ConfigOptionInt skirt_height;
ConfigOptionInt skirts; ConfigOptionInt skirts;
ConfigOptionInt slowdown_below_layer_time; ConfigOptionInts slowdown_below_layer_time;
ConfigOptionBool spiral_vase; ConfigOptionBool spiral_vase;
ConfigOptionInt standby_temperature_delta; ConfigOptionInt standby_temperature_delta;
ConfigOptionInts temperature; ConfigOptionInts temperature;