3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-11-01 21:21:10 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 5

Slic3r has been modified to propagate the following filament specific

Browse source 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
This commit is contained in:
bubnikv 2017-06-21 16:15:39 +02:00
parent 0bd2bb1e8e
commit f0325575c2
16 changed files with 180 additions and 135 deletions
Download patch file Download diff file Expand all files Collapse all files

16
slic3r.pl
View file

@ -315,7 +315,7 @@ $j
--temperature Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0])
--first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
set 0 to disable (default: same as --temperature)
--bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature})
--bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}[0])
--first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
set 0 to disable (default: same as --bed-temperature)
@ -464,15 +464,15 @@ $j
Cooling options:
--cooling Enable fan and cooling control
--min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}%)
--max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}%)
--bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}%)
--min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}[0]%)
--max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}[0]%)
--bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}[0]%)
--fan-below-layer-time Enable fan if layer print time is below this approximate number
of seconds (default: $config->{fan_below_layer_time})
of seconds (default: $config->{fan_below_layer_time}[0])
--slowdown-below-layer-time Slow down if layer print time is below this approximate number
of seconds (default: $config->{slowdown_below_layer_time})
--min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed})
--disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers})
of seconds (default: $config->{slowdown_below_layer_time}[0])
--min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed}[0])
--disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}[0])
--fan-always-on Keep fan always on at min fan speed, even for layers that don't need
cooling