PA per filament

src/libslic3r/GCode.cpp

@@ -435,6 +435,11 @@ bool GCode::gcode_label_objects = true;
         gcode += tcr_gcode;
         check_add_eol(toolchange_gcode_str);
 
+        //SoftFever: set new PA for new filament
+        if (gcodegen.config().enable_pressure_advance.get_at(new_extruder_id)) {
+            gcode += gcodegen.writer().set_pressure_advance(gcodegen.config().pressure_advance.get_at(new_extruder_id));
+        }
+
         // A phony move to the end position at the wipe tower.
         gcodegen.writer().travel_to_xy(end_pos.cast<double>());
         gcodegen.set_last_pos(wipe_tower_point_to_object_point(gcodegen, end_pos + plate_origin_2d));
@@ -1641,19 +1646,6 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     if (is_bbl_printers) {
       // if (print.config().spaghetti_detector.value)
       file.write("M981 S1 P20000 ;open spaghetti detector\n");
-      file.write_format("M900 K%.3f M%0.3f ; Override pressure advance value\n",
-                        m_config.pressure_advance.values.front(),
-                        outer_wall_volumetric_speed / (1.75 * 1.75 / 4 * 3.14) *
-                            m_config.pressure_advance.values.front());
-    } else {
-      if (m_config.enable_pressure_advance.value) {
-        if(print.config().gcode_flavor.value == gcfKlipper)
-            file.write_format("SET_PRESSURE_ADVANCE ADVANCE=%.3f ; Override pressure advance value\n",
-                          m_config.pressure_advance.values.front());
-        else
-            file.write_format("M900 K%.3f ; Override pressure advance value\n",
-                          m_config.pressure_advance.values.front());
-      }
     }
 
     // Do all objects for each layer.
@@ -4226,6 +4218,10 @@ std::string GCode::set_extruder(unsigned int extruder_id, double print_z)
     if (m_ooze_prevention.enable)
         gcode += m_ooze_prevention.post_toolchange(*this);
 
+    if (m_config.enable_pressure_advance.get_at(extruder_id)) {
+        gcode += m_writer.set_pressure_advance(m_config.pressure_advance.get_at(extruder_id));
+    }
+
     return gcode;
 }
 

src/libslic3r/GCodeWriter.cpp

@@ -209,6 +209,22 @@ std::string GCodeWriter::set_jerk_xy(unsigned int jerk)
 
 }
 
+std::string GCodeWriter::set_pressure_advance(double pa) const
+{
+    std::ostringstream gcode;
+    if (pa < 0)
+        return gcode.str();
+
+    if (FLAVOR_IS(gcfKlipper))
+        gcode << "SET_PRESSURE_ADVANCE ADVANCE=" << std::setprecision(4) << pa << "; Override pressure advance value\n";
+    else
+        gcode << "M900 K" <<std::setprecision(4)<< pa << "; Override pressure advance value\n";
+
+    return gcode.str();
+}
+
+
+
 std::string GCodeWriter::reset_e(bool force)
 {
     if (FLAVOR_IS(gcfMach3)

src/libslic3r/GCodeWriter.hpp

@@ -47,6 +47,7 @@ public:
     std::string set_bed_temperature(std::vector<int> temps_per_bed, int default_temp, bool wait = false);
     std::string set_acceleration(unsigned int acceleration);
     std::string set_jerk_xy(unsigned int jerk);
+    std::string set_pressure_advance(double pa) const;
     std::string reset_e(bool force = false);
     std::string update_progress(unsigned int num, unsigned int tot, bool allow_100 = false) const;
     // return false if this extruder was already selected

src/libslic3r/PrintConfig.cpp

@@ -1085,10 +1085,10 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloats { 1. });
 
-    def = this->add("enable_pressure_advance", coBool);
+    def = this->add("enable_pressure_advance", coBools);
     def->label = L("Enable pressure advance");
     def->tooltip = L("Enable pressure advance, auto calibration result will be overwriten once enabled.");
-    def->set_default_value(new ConfigOptionBool(false));
+    def->set_default_value(new ConfigOptionBools{ false });
 
     def = this->add("pressure_advance", coFloats);
     def->label = L("Pressure advance");

src/libslic3r/PrintConfig.hpp

@@ -760,7 +760,7 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionString,              machine_end_gcode))
     ((ConfigOptionStrings,             filament_end_gcode))
     ((ConfigOptionFloats,              filament_flow_ratio))
-    ((ConfigOptionBool,                enable_pressure_advance))
+    ((ConfigOptionBools,               enable_pressure_advance))
     ((ConfigOptionFloats,              pressure_advance))
     ((ConfigOptionFloats,              filament_diameter))
     ((ConfigOptionFloats,              filament_density))

src/slic3r/GUI/Tab.cpp

@@ -2675,7 +2675,7 @@ void TabFilament::toggle_options()
     }
     if (m_active_page->title() == "Filament")
     {
-        bool pa = m_config->opt_bool("enable_pressure_advance");
+        bool pa = m_config->opt_bool("enable_pressure_advance", 0);
         toggle_option("pressure_advance", pa);
 
         toggle_line("cool_plate_temp_initial_layer", is_BBL_printer);