ENH: add acceleration para

thanks SoftFever

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie82934e2fb5cdb4ec77246e2d5cd6be36fdc7d5a

src/libslic3r/GCode.cpp

@@ -3808,6 +3808,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
             acceleration = m_config.outer_wall_acceleration.value;
         } else if (m_config.top_surface_acceleration.value > 0 && is_top_surface(path.role())) {
             acceleration = m_config.top_surface_acceleration.value;
+        } else if (m_config.inner_wall_acceleration.value > 0 && path.role() == erPerimeter) {
+            acceleration = m_config.inner_wall_acceleration.value;
+        } else if (m_config.get_abs_value("sparse_infill_acceleration") > 0 && (path.role() == erInternalInfill)) {
+            acceleration = m_config.get_abs_value("sparse_infill_acceleration");
         } else {
             acceleration = m_config.default_acceleration.value;
         }

src/libslic3r/Preset.cpp

@@ -729,7 +729,7 @@ static std::vector<std::string> s_Preset_print_options {
     "inner_wall_speed", "outer_wall_speed", "sparse_infill_speed", "internal_solid_infill_speed",
     "top_surface_speed", "support_speed", "support_object_xy_distance", "support_interface_speed",
     "bridge_speed", "gap_infill_speed", "travel_speed", "travel_speed_z", "initial_layer_speed", "outer_wall_acceleration",
-    "initial_layer_acceleration", "top_surface_acceleration", "default_acceleration", 
+    "initial_layer_acceleration", "top_surface_acceleration", "default_acceleration", "inner_wall_acceleration", "sparse_infill_acceleration",
     "accel_to_decel_enable", "accel_to_decel_factor", "skirt_loops", "skirt_distance",
     "skirt_height", "draft_shield",
     "brim_width", "brim_object_gap", "brim_type", "enable_support", "support_type", "support_threshold_angle", "enforce_support_layers",

src/libslic3r/Print.cpp

@@ -158,7 +158,9 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "infill_jerk",
         "top_surface_jerk",
         "initial_layer_jerk",
-        "travel_jerk"
+        "travel_jerk",
+        "inner_wall_acceleration",
+        "sparse_infill_acceleration"
     };
 
     static std::unordered_set<std::string> steps_ignore;

src/libslic3r/PrintConfig.cpp

@@ -1403,6 +1403,23 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(500));
 
+    def = this->add("inner_wall_acceleration", coFloat);
+    def->label = L("Inner wall");
+    def->tooltip = L("Acceleration of inner walls. 0 means using normal printing acceleration");
+    def->sidetext = L("mm/s²");
+    def->min = 0;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionFloat(0));
+
+    def             = this->add("sparse_infill_acceleration", coFloatOrPercent);
+    def->label      = L("Sparse infill");
+    def->tooltip    = L("Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
+    def->sidetext   = L("mm/s² or %");
+    def->min        = 0;
+    def->mode       = comAdvanced;
+    def->ratio_over = "default_acceleration";
+    def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
+
     def = this->add("initial_layer_acceleration", coFloat);
     def->label = L("Initial layer");
     def->tooltip = L("Acceleration of initial layer. Using a lower value can improve build plate adhensive");

src/libslic3r/PrintConfig.hpp

@@ -892,6 +892,8 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionEnum<PrintSequence>,print_sequence))
     ((ConfigOptionBools,              slow_down_for_layer_cooling))
     ((ConfigOptionFloat,              default_acceleration))
+    ((ConfigOptionFloat,              inner_wall_acceleration))
+    ((ConfigOptionFloatOrPercent,     sparse_infill_acceleration))
     ((ConfigOptionInts,               close_fan_the_first_x_layers))
     ((ConfigOptionEnum<DraftShield>,  draft_shield))
     ((ConfigOptionFloat,              extruder_clearance_height_to_rod))//BBs

src/slic3r/GUI/ConfigManipulation.cpp

@@ -569,7 +569,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
 
     bool have_default_acceleration = config->opt_float("default_acceleration") > 0;
     //BBS
-    for (auto el : { "initial_layer_acceleration", "outer_wall_acceleration", "top_surface_acceleration" })
+    for (auto el : { "initial_layer_acceleration", "outer_wall_acceleration", "top_surface_acceleration", "inner_wall_acceleration", "sparse_infill_acceleration" })
         toggle_field(el, have_default_acceleration);
     if (is_BBL_Printer) {
         for (auto el : {"default_jerk", "outer_wall_jerk", "inner_wall_jerk", "infill_jerk", "top_surface_jerk", "initial_layer_jerk", "travel_jerk"})

src/slic3r/GUI/Tab.cpp

@@ -1944,10 +1944,12 @@ void TabPrint::build()
         optgroup->append_single_option_line("travel_speed");
 
         optgroup = page->new_optgroup(L("Acceleration"), L"param_acceleration", 15);
+        optgroup->append_single_option_line("default_acceleration");
         optgroup->append_single_option_line("initial_layer_acceleration");
         optgroup->append_single_option_line("outer_wall_acceleration");
+        optgroup->append_single_option_line("inner_wall_acceleration");
         optgroup->append_single_option_line("top_surface_acceleration");
-        optgroup->append_single_option_line("default_acceleration");
+        optgroup->append_single_option_line("sparse_infill_acceleration");
         optgroup->append_single_option_line("accel_to_decel_enable");
         optgroup->append_single_option_line("accel_to_decel_factor");