3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-07 06:57:36 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

Changed Slic3r mentions (#3344)

Browse source
This commit is contained in:
Thomas 2023-12-29 13:18:46 +01:00 • committed by GitHub
parent fab8b78d69
commit e3f08c544b
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
18 changed files with 193 additions and 193 deletions
Download patch file Download diff file Expand all files Collapse all files

14
src/libslic3r/PrintConfig.cpp
View file

@ -487,7 +487,7 @@ void PrintConfigDef::init_common_params()
def = this->add("print_host", coString);
def->label = L("Hostname, IP or URL");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
def->tooltip = L("Orca Slicer can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. "
"Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL "
"in the following format: https://username:password@your-octopi-address/");
@ -505,7 +505,7 @@ void PrintConfigDef::init_common_params()
def = this->add("printhost_apikey", coString);
def->label = L("API Key / Password");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain "
def->tooltip = L("Orca Slicer can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication.");
def->mode = comAdvanced;
def->cli = ConfigOptionDef::nocli;
@ -1633,7 +1633,7 @@ def = this->add("filament_loading_speed", coFloats);
def->label = L("Minimal purge on wipe tower");
def->tooltip = L("After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet stable. "
"Before purging the print head into an infill or a sacrificial object, Slic3r will always prime "
"Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime "
"this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably.");
def->sidetext = L("mm³");
def->min = 0;
@ -1837,7 +1837,7 @@ def = this->add("filament_loading_speed", coFloats);
def->label = L("Sparse infill anchor length");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. "
"\nSet this parameter to zero to disable anchoring perimeters connected to a single infill line.");
@ -1864,7 +1864,7 @@ def = this->add("filament_loading_speed", coFloats);
def->label = L("Maximum length of the infill anchor");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. "
"\nIf set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0.");
@ -2826,7 +2826,7 @@ def = this->add("filament_loading_speed", coFloats);
def = this->add("host_type", coEnum);
def->label = L("Host Type");
def->tooltip = L("Slic3r can upload G-code files to a printer host. This field must contain "
def->tooltip = L("Orca Slicer can upload G-code files to a printer host. This field must contain "
"the kind of the host.");
def->enum_keys_map = &ConfigOptionEnum<PrintHostType>::get_enum_values();
def->enum_values.push_back("prusalink");
@ -3021,7 +3021,7 @@ def = this->add("filament_loading_speed", coFloats);
def->tooltip = L("If you want to process the output G-code through custom scripts, "
"just list their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first argument, "
"and they can access the Slic3r config settings by reading environment variables.");
"and they can access the Orca Slicer config settings by reading environment variables.");
def->gui_flags = "serialized";
def->multiline = true;
def->full_width = true;