diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json
new file mode 100644
index 0000000000..49a5cb56d1
--- /dev/null
+++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -0,0 +1,292 @@
+{
+    "type": "process",
+    "name": "0.12mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "print_settings_id": "0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "layer_height": "0.12",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+    "compatible_printers": [
+        "Anycubic Kobra 2 Neo 0.4 nozzle"
+    ],
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "adaptive_layer_height": "1",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0.6",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "0.9",
+    "bridge_no_support": "1",
+    "bridge_speed": "60",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0.15",
+    "brim_type": "outer_only",
+    "brim_width": "5",
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "2000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.075",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "1",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "1",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "0",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "topbottom",
+    "gap_infill_speed": "100",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400",
+    "infill_anchor_max": "10",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "45",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.12",
+    "initial_layer_speed": "45",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "1500",
+    "inner_wall_jerk": "10",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "65",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "zig-zag",
+    "internal_solid_infill_speed": "100",
+    "ironing_angle": "0",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "5",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "15",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "1",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1000",
+    "outer_wall_jerk": "10",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "45",
+    "overhang_1_4_speed": "60",
+    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "28",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "1",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "precise_z_height": "0",
+    "prime_tower_brim_width": "5",
+    "prime_tower_width": "45",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "rotate_solid_infill_direction": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "5%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "1",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_direction": "45",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "150",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.1",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.4",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "1",
+    "support_remove_small_overhang": "1",
+    "support_speed": "100",
+    "support_style": "default",
+    "support_threshold_angle": "40",
+    "support_top_z_distance": "0.1",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_bottom_infill_wall_overlap": "25%",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "1000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "60",
+    "travel_acceleration": "2000",
+    "travel_jerk": "10",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "classic",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "2",
+    "wall_sequence": "outer wall/inner wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "15",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_max_purge_speed": "90",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+    "solid_infill_rotate_template": ""
+}
\ No newline at end of file
diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json
new file mode 100644
index 0000000000..ffd74ae991
--- /dev/null
+++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -0,0 +1,291 @@
+{
+    "type": "process",
+    "name": "0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "layer_height": "0.16",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+    "compatible_printers": [
+        "Anycubic Kobra 2 Neo 0.4 nozzle"
+    ],
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "adaptive_layer_height": "1",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0.6",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "0.9",
+    "bridge_no_support": "1",
+    "bridge_speed": "30",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0.15",
+    "brim_type": "outer_only",
+    "brim_width": "5",
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "2000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.075",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "1",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "1",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "1",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "0",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "topbottom",
+    "gap_infill_speed": "100",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400",
+    "infill_anchor_max": "10",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "45",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "45",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "1500",
+    "inner_wall_jerk": "10",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "100",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "zig-zag",
+    "internal_solid_infill_speed": "100",
+    "ironing_angle": "0",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "5",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "15",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "1",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1000",
+    "outer_wall_jerk": "10",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "20",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "1",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "precise_z_height": "0",
+    "prime_tower_brim_width": "5",
+    "prime_tower_width": "45",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "rotate_solid_infill_direction": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "15%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "1",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_direction": "45",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "150",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.1",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.4",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "1",
+    "support_remove_small_overhang": "1",
+    "support_speed": "100",
+    "support_style": "default",
+    "support_threshold_angle": "40",
+    "support_top_z_distance": "0.1",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_bottom_infill_wall_overlap": "25%",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "1000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "60",
+    "travel_acceleration": "2000",
+    "travel_jerk": "10",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "classic",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "2",
+    "wall_sequence": "outer wall/inner wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "15",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_max_purge_speed": "90",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0.1"
+}
\ No newline at end of file
diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json
new file mode 100644
index 0000000000..3ff5e918f5
--- /dev/null
+++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -0,0 +1,291 @@
+{
+    "type": "process",
+    "name": "0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "inherits": "fdm_process_common",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "print_settings_id": "0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
+    "layer_height": "0.28",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+    "compatible_printers": [
+        "Anycubic Kobra 2 Neo 0.4 nozzle"
+    ],
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "adaptive_layer_height": "1",
+    "alternate_extra_wall": "0",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0.6",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "0.9",
+    "bridge_no_support": "1",
+    "bridge_speed": "30",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0.15",
+    "brim_type": "outer_only",
+    "brim_width": "5",
+    "compatible_printers_condition": "",
+    "counterbore_hole_bridging": "none",
+    "default_acceleration": "2000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.075",
+    "elefant_foot_compensation_layers": "1",
+    "enable_arc_fitting": "1",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "1",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "1",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "0",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_fill_target": "topbottom",
+    "gap_infill_speed": "80",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "1",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400",
+    "infill_anchor_max": "10",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "45",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.28",
+    "initial_layer_speed": "45",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "1500",
+    "inner_wall_jerk": "10",
+    "inner_wall_line_width": "0.45",
+    "inner_wall_speed": "100",
+    "interface_shells": "0",
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "zig-zag",
+    "internal_solid_infill_speed": "100",
+    "ironing_angle": "0",
+    "ironing_flow": "15%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.1",
+    "ironing_speed": "15",
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "5",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_length_factor": "0.5",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "15",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "1",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1000",
+    "outer_wall_jerk": "10",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "55",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "1",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "precise_z_height": "0",
+    "prime_tower_brim_width": "5",
+    "prime_tower_width": "45",
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "rotate_solid_infill_direction": "1",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "15%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "1",
+    "slowdown_for_curled_perimeters": "0",
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+        "0,0",
+        "\n0.2,0.4444",
+        "\n0.4,0.6145",
+        "\n0.6,0.7059",
+        "\n0.8,0.7619",
+        "\n1.5,0.8571",
+        "\n2,0.8889",
+        "\n3,0.9231",
+        "\n5,0.9520",
+        "\n10,1"
+    ],
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_direction": "45",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_speed": "120",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.1",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.4",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "1",
+    "support_remove_small_overhang": "1",
+    "support_speed": "100",
+    "support_style": "default",
+    "support_threshold_angle": "40",
+    "support_top_z_distance": "0.1",
+    "support_type": "tree(auto)",
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "timelapse_type": "0",
+    "top_bottom_infill_wall_overlap": "25%",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "1000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "60",
+    "travel_acceleration": "2000",
+    "travel_jerk": "10",
+    "travel_speed": "300",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "classic",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "2",
+    "wall_sequence": "outer wall/inner wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_before_external_loop": "0",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "15",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_max_purge_speed": "90",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0.1"
+}
\ No newline at end of file