diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json
index 6f7bd1649a..b63413d8ce 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
@@ -94,6 +94,9 @@
     ],
     "z_hop": [
         "0.2"
+    ],
+        "machine_max_junction_deviation": [
+        "0.01"
     ],
     "fan_speedup_time": "0.2",
     "fan_speedup_overhangs": "1",
@@ -102,7 +105,7 @@
     "printable_height": "180",
     "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
     "machine_pause_gcode": "M601",
-    "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.0.3+14902\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all without mesh bed level\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow",
+    "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.4.0+11974\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all without mesh bed level\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))} Y{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))}",
     "change_filament_gcode": "M600",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json
index 8d5307d1a8..18576df366 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json	
@@ -95,6 +95,9 @@
     "z_hop": [
         "0.2"
     ],
+    "machine_max_junction_deviation": [
+        "0.01"
+    ],
     "fan_speedup_time": "0.2",
     "fan_speedup_overhangs": "1",
     "fan_kickstart": "0",
@@ -102,7 +105,7 @@
     "printable_height": "210",
     "machine_end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y201 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM572 S0 ; reset PA\nM593 X T2 F0 ; disable IS\nM593 Y T2 F0 ; disable IS\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]",
     "machine_pause_gcode": "M601",
-    "machine_start_gcode": "M17 ; enable steppers\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.3 P \"MK3.5\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.2.2+8853\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nG28 ; home all\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S170 ; set extruder temp for bed leveling\nM109 T0 R170 ; wait for temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X23 Y5 W80 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\n; Extrude purge line\n\nG92 E0 ; reset extruder position\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z0.05 F8000 ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F8000 ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; reset flow to 100%\n",
+    "machine_start_gcode": "M17 ; enable steppers\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.3 P \"MK3.5\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.4.0+11974\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nG28 ; home all\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S170 ; set extruder temp for bed leveling\nM109 T0 R170 ; wait for temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X23 Y5 W80 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\n; Extrude purge line\n\nG92 E0 ; reset extruder position\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z0.05 F8000 ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F8000 ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; reset flow to 100%\n",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))} Y{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))}\n",
     "change_filament_gcode": "M600",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json
index 9f2b524b57..6298c71d49 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json	
@@ -19,6 +19,9 @@
     "top_shell_layers": "13",
     "bottom_shell_thickness": "0.5",
     "bottom_shell_layers": "10",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json
index 9f82ceb6eb..a9a79b47a1 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @MK3.5.json	
@@ -19,7 +19,9 @@
     "top_shell_layers": "13",
     "bottom_shell_thickness": "0.5",
     "bottom_shell_layers": "10",
+    "support_base_pattern_spacing": "1",
     "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json
index 9217fc2f00..63d1757fd0 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json	
@@ -21,7 +21,9 @@
     "bottom_shell_layers": "8",
     "bridge_speed": "30",
     "internal_solid_infill_speed": "140",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json
index 6fc9c6886c..eb90dc1922 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @MK3.5.json	
@@ -21,7 +21,9 @@
     "bottom_shell_layers": "8",
     "bridge_speed": "30",
     "internal_solid_infill_speed": "140",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json
index b8107625fa..6a87714bb0 100644
--- a/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json	
@@ -24,7 +24,9 @@
     "internal_solid_infill_acceleration": "3000",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MINIIS 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json
index 92d201b8e1..7327e51e82 100644
--- a/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.10mm Speed @MK3.5.json	
@@ -24,7 +24,9 @@
     "internal_solid_infill_acceleration": "3000",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MK3.5 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json
index e8518fdb25..c4d772993f 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json	
@@ -31,7 +31,8 @@
     "overhang_1_4_speed": "60",
     "internal_solid_infill_acceleration": "2500",
     "sparse_infill_acceleration": "2500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json
index abaef8f727..76ce6b9221 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @MK3.5.json	
@@ -31,7 +31,8 @@
     "overhang_1_4_speed": "60",
     "internal_solid_infill_acceleration": "2500",
     "sparse_infill_acceleration": "2500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json
index f0d03268c4..72175e280d 100644
--- a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json	
@@ -36,7 +36,9 @@
     "internal_solid_infill_acceleration": "2500",
     "sparse_infill_acceleration": "2500",
     "travel_acceleration": "3000",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json
index 6099147be4..8f4b41b380 100644
--- a/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.12mm Standard @MK3.5.json	
@@ -36,7 +36,9 @@
     "internal_solid_infill_acceleration": "2500",
     "sparse_infill_acceleration": "2500",
     "travel_acceleration": "3000",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json
index 58a8211986..81711734a1 100644
--- a/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.15mm High Flow @MINIIS.json	
@@ -29,7 +29,8 @@
     "inner_wall_acceleration": "3500",
     "outer_wall_acceleration": "2500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MINIIS 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json
index 92db093a4c..a3ecfea49b 100644
--- a/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm High Flow @MK3.5.json	
@@ -29,7 +29,8 @@
     "inner_wall_acceleration": "3500",
     "outer_wall_acceleration": "2500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MK3.5 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json
index 30d9a165d5..3aa3019d76 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json	
@@ -29,7 +29,8 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json
index 853e0e01e6..6f6a9cffcd 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json	
@@ -29,7 +29,8 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MINIIS 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json
index 09c562d356..e322f1ce63 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5 0.25.json	
@@ -29,7 +29,8 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_interface_spacing": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json
index 175c896845..31eb1443bb 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @MK3.5.json	
@@ -29,7 +29,8 @@
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_interface_spacing": "0.17",
     "compatible_printers": [
         "Prusa MK3.5 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json
index b6fe166ce1..362ed653d2 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json	
@@ -29,7 +29,9 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MINIIS 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json
index 606e52ecb7..5cd6746563 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json	
@@ -37,7 +37,10 @@
     "inner_wall_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json
index 3f1a5c6825..d61a785155 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json	
@@ -33,7 +33,8 @@
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MINIIS 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json
index eca3cdad8c..3d55cc1e39 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.25.json	
@@ -29,7 +29,9 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "1",
+    "support_top_z_distance": "0.09",
+    "support_bottom_z_distance": "0.09",
     "compatible_printers": [
         "Prusa MK3.5 0.25 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json
index 6c6a80a261..c0087d57ea 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5 0.6.json	
@@ -37,7 +37,11 @@
     "inner_wall_acceleration": "2500",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json
index 4044df4712..e6161e5896 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MK3.5.json	
@@ -28,7 +28,8 @@
     "internal_solid_infill_acceleration": "2500",
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
-    "support_top_z_distance": "0.1",
+    "support_top_z_distance": "0.17",
+    "support_bottom_z_distance": "0.17",
     "compatible_printers": [
         "Prusa MK3.5 0.4 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json
index aeca348889..15363df16c 100644
--- a/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm High Flow @MINIIS 0.6.json	
@@ -36,5 +36,10 @@
     "outer_wall_acceleration": "4000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
-    "overhang_1_4_speed": "45"
+    "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm High Flow @MK3.5 0.6.json b/resources/profiles/Prusa/process/0.20mm High Flow @MK3.5 0.6.json
index 2aa0d96b93..c9056822db 100644
--- a/resources/profiles/Prusa/process/0.20mm High Flow @MK3.5 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm High Flow @MK3.5 0.6.json	
@@ -36,5 +36,10 @@
     "outer_wall_acceleration": "4000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
-    "overhang_1_4_speed": "45"
+    "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json
index 2e2cb971fe..29f9977358 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json	
@@ -34,5 +34,10 @@
     "outer_wall_acceleration": "2000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
-    "overhang_1_4_speed": "45"
+    "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MK3.5 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @MK3.5 0.6.json
index fb256ecc05..79c38ffeea 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @MK3.5 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @MK3.5 0.6.json	
@@ -34,5 +34,10 @@
     "outer_wall_acceleration": "2000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
-    "overhang_1_4_speed": "45"
+    "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json
index 6ed283fa8c..d27e89b756 100644
--- a/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json	
@@ -29,6 +29,11 @@
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
     "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MK3.5 0.6.json b/resources/profiles/Prusa/process/0.20mm Standard @MK3.5 0.6.json
index f6e1946a04..e4b4f4b5d1 100644
--- a/resources/profiles/Prusa/process/0.20mm Standard @MK3.5 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Standard @MK3.5 0.6.json	
@@ -29,6 +29,11 @@
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
     "overhang_1_4_speed": "45",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json
index 4521f5fbb1..f1784af6c5 100644
--- a/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.25mm High Flow @MINIIS.json	
@@ -40,7 +40,11 @@
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
     "overhang_1_4_speed": "45",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json
index 00faf7f563..0cb9257ddf 100644
--- a/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm High Flow @MK3.5.json	
@@ -40,7 +40,11 @@
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
     "overhang_1_4_speed": "45",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json
index c5085cbf7c..33e3de92dc 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json	
@@ -30,7 +30,11 @@
     "overhang_1_4_speed": "45",
     "travel_speed": "300",
     "internal_solid_infill_acceleration": "3000",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json b/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json
index 6dec0d7f5c..7ebe2664ef 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @MK3.5.json	
@@ -30,7 +30,11 @@
     "overhang_1_4_speed": "45",
     "travel_speed": "300",
     "internal_solid_infill_acceleration": "3000",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json
index e98b851fc4..4191366100 100644
--- a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json	
@@ -29,7 +29,11 @@
     "gap_infill_speed": "60",
     "support_speed": "80",
     "travel_speed": "300",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json
index e9c0451d61..64e099d97e 100644
--- a/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm Standard @MK3.5.json	
@@ -29,7 +29,11 @@
     "gap_infill_speed": "60",
     "support_speed": "80",
     "travel_speed": "300",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json
index 90a7a28fb8..dcc20a87bd 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json	
@@ -21,7 +21,11 @@
     "bottom_shell_thickness": "0.5",
     "bottom_shell_layers": "2",
     "travel_speed": "300",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MINIIS 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json b/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json
index 7d4ed7d622..975851d38f 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @MK3.5.json	
@@ -21,7 +21,11 @@
     "bottom_shell_thickness": "0.5",
     "bottom_shell_layers": "2",
     "travel_speed": "300",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MK3.5 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json
index a1fbbc989f..7602017ccd 100644
--- a/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.32mm High Flow @MINIIS.json	
@@ -37,7 +37,11 @@
     "outer_wall_acceleration": "4000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json
index 43a0733ac4..b295a0b1b3 100644
--- a/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.32mm High Flow @MK3.5.json	
@@ -39,7 +39,11 @@
     "outer_wall_acceleration": "4000",
     "bridge_acceleration": "1500",
     "internal_solid_infill_acceleration": "3000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json
index 411a870db7..c1edeeb9eb 100644
--- a/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.32mm Standard @MINIIS.json	
@@ -30,7 +30,11 @@
     "top_surface_speed": "55",
     "gap_infill_speed": "45",
     "travel_speed": "300",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json
index 1f4001c0fb..5674aed58e 100644
--- a/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.32mm Standard @MK3.5.json	
@@ -30,7 +30,11 @@
     "top_surface_speed": "55",
     "gap_infill_speed": "45",
     "travel_speed": "300",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.25",    
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json
index bb7145adc8..edc3044976 100644
--- a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json	
@@ -30,7 +30,11 @@
     "top_surface_speed": "55",
     "gap_infill_speed": "45",
     "travel_speed": "300",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MINIIS 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json
index 9ff6c800c2..82e2034788 100644
--- a/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.35mm Standard @MK3.5.json	
@@ -30,7 +30,11 @@
     "top_surface_speed": "55",
     "gap_infill_speed": "45",
     "travel_speed": "300",
-    "support_top_z_distance": "0.25",
+    "support_base_pattern_spacing": "2",
+    "support_top_z_distance": "0.22",
+    "support_bottom_z_distance": "0.22",
+    "support_bottom_interface_spacing": "0.22",
+    "support_interface_spacing": "0.25",
     "compatible_printers": [
         "Prusa MK3.5 0.6 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json b/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json
index 593fda4beb..ea55022d19 100644
--- a/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.40mm High Flow @MINIIS.json	
@@ -41,7 +41,11 @@
     "inner_wall_acceleration": "3000",
     "outer_wall_acceleration": "2500",
     "bridge_acceleration": "1000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MINIIS 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json b/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json
index 056c8cb2be..79fda27a93 100644
--- a/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.40mm High Flow @MK3.5.json	
@@ -41,7 +41,11 @@
     "inner_wall_acceleration": "3000",
     "outer_wall_acceleration": "2500",
     "bridge_acceleration": "1000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MK3.5 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json
index c040568d16..a29bbbdbbe 100644
--- a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json	
@@ -40,7 +40,11 @@
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MINIIS 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json b/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json
index 31fddc238b..41659260f1 100644
--- a/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json	
+++ b/resources/profiles/Prusa/process/0.40mm Standard @MK3.5.json	
@@ -41,7 +41,11 @@
     "inner_wall_acceleration": "2000",
     "outer_wall_acceleration": "1500",
     "bridge_acceleration": "1000",
+    "support_base_pattern_spacing": "2",
     "support_top_z_distance": "0.25",
+    "support_bottom_z_distance": "0.25",
+    "support_bottom_interface_spacing": "0.25",
+    "support_interface_spacing": "0.35",
     "compatible_printers": [
         "Prusa MK3.5 0.8 nozzle"
     ]
diff --git a/resources/profiles/Prusa/process/process_common_MK3.5.json b/resources/profiles/Prusa/process/process_common_MK3.5.json
index a5471d2bf6..4873772bf7 100644
--- a/resources/profiles/Prusa/process/process_common_MK3.5.json
+++ b/resources/profiles/Prusa/process/process_common_MK3.5.json
@@ -55,10 +55,13 @@
     "raft_contact_distance": "0.15",
     "raft_expansion": "1.5",
     "raft_first_layer_density": "90%",
-    "raft_first_layer_expansion": "3.5",
     "support_threshold_angle": "40",
     "support_interface_bottom_layers": "0",
     "support_base_pattern": "rectilinear",
     "support_interface_top_layers": "3",
-    "support_top_z_distance": "0.17"
+    "raft_first_layer_expansion": "3",
+    "support_base_pattern_spacing": "2",
+    "support_bottom_interface_spacing": "0.2",
+    "support_interface_spacing": "0.2",
+    "support_top_z_distance": "0.2"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/process_common_miniis.json b/resources/profiles/Prusa/process/process_common_miniis.json
index 443fae9dc3..533d660224 100644
--- a/resources/profiles/Prusa/process/process_common_miniis.json
+++ b/resources/profiles/Prusa/process/process_common_miniis.json
@@ -55,10 +55,13 @@
     "raft_contact_distance": "0.15",
     "raft_expansion": "1.5",
     "raft_first_layer_density": "90%",
-    "raft_first_layer_expansion": "3.5",
     "support_threshold_angle": "40",
     "support_interface_bottom_layers": "0",
     "support_base_pattern": "rectilinear",
     "support_interface_top_layers": "3",
-    "support_top_z_distance": "0.17"
+    "raft_first_layer_expansion": "3",
+    "support_base_pattern_spacing": "2",
+    "support_bottom_interface_spacing": "0.2",
+    "support_interface_spacing": "0.2",
+    "support_top_z_distance": "0.2"
 }
\ No newline at end of file
diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index e3ad309b02..048a428e40 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -2727,8 +2727,8 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
 
         auto probe_dist_x  = std::max(1., m_config.bed_mesh_probe_distance.value.x());
         auto probe_dist_y  = std::max(1., m_config.bed_mesh_probe_distance.value.y());
-        int  probe_count_x = std::max(3, (int) std::ceil(mesh_bbox.size().x() / probe_dist_x));
-        int  probe_count_y = std::max(3, (int) std::ceil(mesh_bbox.size().y() / probe_dist_y));
+        int  probe_count_x = std::max(3, (int) std::ceil(mesh_bbox.size().x() / probe_dist_x) + 1);
+        int  probe_count_y = std::max(3, (int) std::ceil(mesh_bbox.size().y() / probe_dist_y) + 1);
         auto bed_mesh_algo = "bicubic";
         if (probe_count_x * probe_count_y <= 6) { // lagrange needs up to a total of 6 mesh points
             bed_mesh_algo = "lagrange";
diff --git a/src/slic3r/GUI/OG_CustomCtrl.cpp b/src/slic3r/GUI/OG_CustomCtrl.cpp
index 8be287fd3d..331d4a5db8 100644
--- a/src/slic3r/GUI/OG_CustomCtrl.cpp
+++ b/src/slic3r/GUI/OG_CustomCtrl.cpp
@@ -53,7 +53,7 @@ OG_CustomCtrl::OG_CustomCtrl(   wxWindow*            parent,
     // BBS: new font
     m_font = Label::Body_14;
     SetFont(m_font);
-    m_em_unit   = em_unit(m_parent);
+    m_em_unit = em_unit(m_parent);
     m_v_gap   = lround(1.2 * m_em_unit);
     m_v_gap2  = lround(0.8 * m_em_unit);
     m_h_gap   = lround(0.2 * m_em_unit);
@@ -597,7 +597,7 @@ void OG_CustomCtrl::msw_rescale()
     SetFont(m_font);
     m_em_unit   = em_unit(m_parent);
     m_v_gap     = lround(1.2 * m_em_unit);
-    m_v_gap2     = lround(0.8 * m_em_unit);
+    m_v_gap2    = lround(0.8 * m_em_unit);
     m_h_gap     = lround(0.2 * m_em_unit);
 
     //m_bmp_mode_sz = create_scaled_bitmap("mode_simple", this, wxOSX ? 10 : 12).GetSize();
@@ -992,7 +992,7 @@ wxPoint OG_CustomCtrl::CtrlLine::draw_act_bmps(wxDC& dc, wxPoint pos, const wxBi
         pos.y += lround((height - get_bitmap_size(bmp_undo).GetHeight()) / 2);
     }
 #endif
-    wxCoord h_pos = pos.x;
+    wxCoord h_pos = pos.x - ctrl->m_h_gap;  // Orca: adjust position to the left
     wxCoord v_pos = pos.y;
 
 #ifndef DISABLE_UNDO_SYS