3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2026-01-04 13:57:43 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 7

Merge branch 'main' into profile-fixes

Browse source
This commit is contained in:
cochcoder 2024-04-10 18:46:58 +00:00 • committed by GitHub
commit cdb51cf670
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
138 changed files with 6296 additions and 460 deletions
Download patch file Download diff file Expand all files Collapse all files

3
.github/workflows/build_all.yml vendored
View file

@ -24,6 +24,9 @@ on:
- '**/CMakeLists.txt'
- 'version.inc'
- ".github/workflows/build_*.yml"
- 'BuildLinux.sh'
- 'build_release_vs2022.bat'
- 'build_release_macos.sh'
workflow_dispatch: # allows for manual dispatch
inputs:

2
doc/Calibration.md
View file

@ -79,7 +79,7 @@ The PA value for this test will be increased by 0.002 for every 1 mm increase in
Steps:
1. Select the printer, filament, and process you would like to use for the test.
2. Examine each corner of the print and mark the height that yields the best overall result.
3. I selected a height of 8 mm for this case, so the pressure advance value should be calculated as `0.002x8 = 0.016`.
3. I selected a height of 8 mm for this case, so the pressure advance value should be calculated as `PressureAdvanceStart+(PressureAdvanceStep x measured)` example: `0+(0.002 x 8) = 0.016`.
![tower](https://user-images.githubusercontent.com/103989404/210140231-e886b98d-280a-4464-9781-c74ed9b7d44e.jpg)
![tower_measure](https://user-images.githubusercontent.com/103989404/210140232-885b549b-e3b8-46b9-a24c-5229c9182408.jpg)

3
doc/adaptive-bed-mesh.md
View file

@ -34,7 +34,8 @@ G29 L{adaptive_bed_mesh_min[0]} R{adaptive_bed_mesh_max[0]} F{adaptive_bed_mesh_
### Klipper:
```
; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally
BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=1 ADAPTIVE_MARGIN=0
; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic
BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0
```
### RRF:
```

105
localization/i18n/de/OrcaSlicer_de.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-29 21:10+0800\n"
"POT-Creation-Date: 2024-04-05 11:32+0200\n"
"PO-Revision-Date: \n"
"Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
"Language-Team: \n"
@ -11,7 +11,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
"X-Generator: Poedit 3.2.2\n"
"X-Generator: Poedit 3.4.2\n"
msgid "Supports Painting"
msgstr "Stützen aufmalen"
@ -4168,7 +4168,7 @@ msgstr "Volumen:"
msgid "Size:"
msgstr "Größe:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6058,7 +6058,7 @@ msgid "The provided file name is not valid."
msgstr "Der angegebene Dateiname ist ungültig."
msgid "The following characters are not allowed by a FAT file system:"
msgstr "die folgenden Zeichen sind nicht erlaubt beim Fat Datei System:"
msgstr "Folgende Zeichen werden vom FAT Dateisystem nicht unterstützt:"
msgid "Save Sliced file as:"
msgstr "Geslicte Datei speichern unter:"
@ -6261,6 +6261,21 @@ msgstr "Standardseite"
msgid "Set the page opened on startup."
msgstr "Legen Sie die Seite fest, die beim Start geöffnet wird."
msgid "Touchpad"
msgstr "Touchpad"
msgid "Camera style"
msgstr "Kamerastil"
msgid ""
"Select camera navigation style.\n"
"Default: LMB+move for rotation, RMB/MMB+move for panning.\n"
"Touchpad: Alt+move for rotation, Shift+move for panning."
msgstr ""
"Wählen Sie den Kameranavigationsstil aus.\n"
"Standard: LMB+Verschieben für Rotation, RMB/MMB+Verschieben für Schwenken.\n"
"Touchpad: Alt+Verschieben für Rotation, Shift+Verschieben für Schwenken."
msgid "Zoom to mouse position"
msgstr "Zum Mausposition zoomen"
@ -6277,6 +6292,12 @@ msgstr "Freie Kamera verwenden"
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr "Wenn aktiviert, wird die freie Kamera verwendet."
msgid "Reverse mouse zoom"
msgstr "Maus-Zoom umkehren"
msgid "If enabled, reverses the direction of zoom with mouse wheel."
msgstr "Wenn aktiviert, wird die Richtung des Zooms mit dem Mausrad umgekehrt."
msgid "Show splash screen"
msgstr "Splash-Screen anzeigen"
@ -6851,8 +6872,8 @@ msgstr ""
msgid ""
"Timelapse is not supported because Print sequence is set to \"By object\"."
msgstr ""
"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach Objekt"
"\" eingestellt ist."
"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach "
"Objekt\" eingestellt ist."
msgid "Errors"
msgstr "Fehler"
@ -7200,13 +7221,13 @@ msgstr "Ignorieren"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
"\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
"\"Timelapse Wischturm\" wählen."
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
">\"Timelapse Wischturm\" wählen."
msgid "Line width"
msgstr "Breite der Linie"
@ -7856,7 +7877,10 @@ msgstr ""
"Ramming bezeichnet die schnelle Extrusion kurz vor einem Werkzeugwechsel bei "
"einem Single-Extruder-MM-Drucker. Sein Zweck ist es, das Ende des entladenen "
"Filaments so zu formen, dass es das Einsetzen des neuen Filaments nicht "
"verhindert und selbst später wieder eingeführt werden kann. Diese "
"verhindert und selbst später wieder eingeführt werden kann.\n"
"\n"
"Dies ist eine Einstellung für Experten, eine falsche Einstellung führt "
"wahrscheinlich zu Verstopfungen, schleifendem Extruderrad, usw."
msgid "Total ramming time"
msgstr "Summe der Ramming-Zeit"
@ -7920,10 +7944,10 @@ msgid "To"
msgstr "Zu"
msgid "Bambu Network plug-in not detected."
msgstr "Bambu Network-Plug-in nicht erkannt."
msgstr "Bambu Network Plugin nicht erkannt."
msgid "Click here to download it."
msgstr "Klicken Sie hier, um es herunterzuladen."
msgstr "Hier klicken um es herunterzuladen."
msgid "Login"
msgstr "Anmelden"
@ -8102,7 +8126,7 @@ msgid "Gizmo cut"
msgstr "Trennen"
msgid "Gizmo Place face on bed"
msgstr "Fläche auf Druckbett platzieren "
msgstr "Fläche auf Druckbett platzieren"
msgid "Gizmo SLA support points"
msgstr "SLA Stützpunkte"
@ -8355,7 +8379,7 @@ msgid "Repair failed."
msgstr "Reparatur fehlgeschlagen."
msgid "Loading repaired objects"
msgstr "Laden reparierter Objekte"
msgstr "Reparierte Objekte laden"
msgid "Exporting 3mf file failed"
msgstr "Exportieren der 3mf-Datei fehlgeschlagen"
@ -10477,7 +10501,7 @@ msgid "Filament price. For statistics only"
msgstr "Filamentpreis. Nur für statistische Zwecke."
msgid "money/kg"
msgstr "€/kg"
msgstr "Kosten/kg"
msgid "Vendor"
msgstr "Hersteller"
@ -10753,13 +10777,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
"Die Lüftergeschwindigkeit wird linear von Null bei der "
"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
"\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
"wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
"läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
@ -10981,7 +11005,7 @@ msgid "The printer cost per hour"
msgstr "Die Druckkosten pro Stunde"
msgid "money/h"
msgstr "€/h"
msgstr "Kosten/h"
msgid "Support control chamber temperature"
msgstr "Druckkammer-Temperatursteuerung"
@ -11969,7 +11993,7 @@ msgid ""
"Apply scarf joints only to smooth perimeters where traditional seams do not "
"conceal the seams at sharp corners effectively."
msgstr ""
"Wenden Sie Schaltnähte nur auf glatte Umfänge an, bei denen traditionelle "
"Wenden Sie Schrägnähte nur auf glatte Umfänge an, bei denen traditionelle "
"Nahtstellen die Nähte an scharfen Ecken nicht effektiv verbergen."
msgid "Conditional angle threshold"
@ -11989,7 +12013,7 @@ msgstr ""
"Schrägnaht verwendet. Der Standardwert beträgt 155°."
msgid "Conditional overhang threshold"
msgstr ""
msgstr "Bedingte Überstandsschwelle"
#, no-c-format, no-boost-format
msgid ""
@ -11999,6 +12023,11 @@ msgid ""
"at 40% of the external wall's width. Due to performance considerations, the "
"degree of overhang is estimated."
msgstr ""
"Diese Option bestimmt den Überhangsschwellenwert für die Anwendung von "
"Schrägnahtnähten. Wenn der nicht unterstützte Teil des Umfangs kleiner als "
"dieser Schwellenwert ist, werden Schrägnahtnähte angewendet. Der "
"Standardwert für die Schwelle beträgt 40% der Breite der äußeren Wand. Auf "
"Grund von Leistungserwägungen wird der Grad des Überhangs geschätzt."
msgid "Scarf joint speed"
msgstr "Schrägnaht Geschwindigkeit"
@ -12013,8 +12042,8 @@ msgid ""
"percentage (e.g., 80%), the speed is calculated based on the respective "
"outer or inner wall speed. The default value is set to 100%."
msgstr ""
"Diese Option legt die Druckgeschwindigkeit für Schaltnähte fest. Es wird "
"empfohlen, Schaltnähte mit einer langsamen Geschwindigkeit (weniger als 100 "
"Diese Option legt die Druckgeschwindigkeit für Schrägnähte fest. Es wird "
"empfohlen, Schrägnähte mit einer langsamen Geschwindigkeit (weniger als 100 "
"mm/s) zu drucken. Es ist auch ratsam, die 'Glättung der Extrusionsrate' zu "
"aktivieren, wenn die eingestellte Geschwindigkeit erheblich von der "
"Geschwindigkeit der äußeren oder inneren Wände abweicht. Wenn die hier "
@ -12029,10 +12058,10 @@ msgid "Scarf joint flow ratio"
msgstr "Schrägnaht Flussverhältnis"
msgid "This factor affects the amount of material for scarf joints."
msgstr "Dieser Faktor beeinflusst die Menge an Material für Schaltnähte."
msgstr "Dieser Faktor beeinflusst die Menge an Material für Schrägnähte."
msgid "Scarf start height"
msgstr "Start Höhe des Schalnaht"
msgstr "Starthöhe der Schrägnaht"
msgid ""
"Start height of the scarf.\n"
@ -12699,7 +12728,7 @@ msgid "Distance from tree branch to the outermost brim line"
msgstr "Abstand vom Modell zur äußersten Randlinie"
msgid "Tip Diameter"
msgstr "Tippdurchmesser"
msgstr "Durchmesser der Spitze"
#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
msgid "Branch tip diameter for organic supports."
@ -12713,7 +12742,7 @@ msgstr "Diese Einstellung bestimmt den Anfangsdurchmesser der Stützknoten."
#. TRN PrintSettings: #lmFIXME
msgid "Branch Diameter Angle"
msgstr "Ast-Durchmesserwinkel"
msgstr "Ast-Verjüngungs-Winkel"
#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
msgid ""
@ -12728,7 +12757,7 @@ msgstr ""
"organischen Stütze erhöhen."
msgid "Branch Diameter with double walls"
msgstr "Ast-Durchmesser mit doppelten Wänden"
msgstr "Doppelte Wände für Ast-Durchmesser ab"
#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
msgid ""
@ -13420,7 +13449,7 @@ msgstr "Volumen pro Extruder"
msgid "Total filament volume extruded per extruder during the entire print."
msgstr ""
"Gesamtes Filamentvolumen, das pro Extruder während des gesamten Drucks "
"extrudiert wurde."
"extrudiert wird."
msgid "Total toolchanges"
msgstr "Gesamte Anzahl der Werkzeugwechsel"
@ -14234,7 +14263,7 @@ msgid "From Volumetric Speed"
msgstr "Vom volumetrischen Speed"
msgid "To Volumetric Speed"
msgstr "zum volumetrischen Speed"
msgstr "zur volumetrischen Geschwindigkeit"
msgid "Flow Dynamics Calibration Result"
msgstr "Flussdynamik-Kalibrierungsergebnis"
@ -14667,8 +14696,8 @@ msgstr ""
"Möchten Sie es überschreiben?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer @Drucker, "
@ -15861,8 +15890,8 @@ msgstr ""
#~ msgstr "Keine dünnen Schichten (EXPERIMENTELL)"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer "

67
localization/i18n/pl/OrcaSlicer_pl.po
View file

@ -1,6 +1,6 @@
msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Project-Id-Version: OrcaSlicer 2.0\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-29 21:10+0800\n"
"PO-Revision-Date: \n"
@ -5622,8 +5622,8 @@ msgid ""
"front door and/or remove the upper glass."
msgstr ""
"Aktualna temperatura podgrzewanego stołu jest stosunkowo wysoka. Dysza może "
"się zatkać podczas drukowania tym filamentu w zamkniętej obudowie. Proszę "
"otworzyć drzwi przednie i/lub zdjąć górny panel."
"się zatkać podczas drukowania tym filamentu w zamkniętej obudowie. Proszę "
"otworzyć drzwi przednie i/lub zdjąć górny panel."
msgid ""
"The nozzle hardness required by the filament is higher than the default "
@ -7109,8 +7109,8 @@ msgstr "Ignoruj"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Podczas nagrywania timelapse'a bez głowicy narzędziowej zaleca się dodanie "
"\"Timelaps - Wieża Czyszcząca\" \n"
@ -8852,7 +8852,7 @@ msgid "Printer preset names"
msgstr "Nazwy profilu drukarki"
msgid "Use 3rd-party print host"
msgstr "Użyj innego serwera druku"
msgstr "Użyj zewnętrznego serwera druku"
msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
msgstr ""
@ -8957,10 +8957,10 @@ msgid ""
msgstr ""
"Unikaj ruchów nad obrysami-\n"
"Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli "
"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami"
"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować "
"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu "
"bezpośredniego."
"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad "
"obrysami\" zostanie zignorowana dla tej ścieżki. Długość objazdu można "
"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z "
"długości ruchu bezpośredniego."
msgid "mm or %"
msgstr "mm lub %"
@ -9520,9 +9520,9 @@ msgid ""
"quality for needle and small details"
msgstr ""
"Włącz tę opcję, aby zwolnić prędkość druku, aby czas końcowej warstwy nie "
"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości wentylatora"
"\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może to poprawić "
"jakość chłodzenia dla igieł i małych detali"
"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości "
"wentylatora\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może "
"to poprawić jakość chłodzenia dla igieł i małych detali"
msgid "Normal printing"
msgstr "Normalne drukowanie"
@ -10649,10 +10649,10 @@ msgstr "Pełna prędkość wentylatora na warstwie"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie "
"\"close_fan_the_first_x_layers\" do maksymalnej na warstwie "
@ -11885,13 +11885,13 @@ msgid ""
"(indicating the absence of sharp corners), a scarf joint seam will be used. "
"The default value is 155°."
msgstr ""
"Ta opcja ustawia próg kątowy do zastosowania warunkowo szwu ukośnego.\n"
"Ten parametr określa minimalny kąt do zastosowania szwu ukośnego.\n"
"Jeśli maksymalny kąt w obrębie pętli obwodu przekroczy tę wartość (co "
"wskazuje na brak ostrych narożników), zostanie użyty szew ukośny. Domyślna "
"wartość to 155°."
msgid "Conditional overhang threshold"
msgstr ""
msgstr "Wartość progowa nawisu"
#, no-c-format, no-boost-format
msgid ""
@ -11901,6 +11901,11 @@ msgid ""
"at 40% of the external wall's width. Due to performance considerations, the "
"degree of overhang is estimated."
msgstr ""
"Ten parametr określa wartości progowe nawisu dla zastosowania szwu ukośnego. "
"Jeśli niepodparta część obwodu jest mniejsza niż ten próg, zostanie "
"zastosowany szew ukośny. Domyślny próg jest ustawiony na 40% szerokości "
"zewnętrznego obwodu. Ze względów wydajnościowych stopień nawisu jest "
"szacowany."
msgid "Scarf joint speed"
msgstr "Prędkość szwu ukośnego"
@ -12140,8 +12145,8 @@ msgstr ""
"poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb \"Wygładź\", "
"głowica narzędziowa przesunie się nad wieżę po wydrukowaniu każdej warstwy, "
"a następnie zrobi zdjęcie. Ponieważ stopiony filament może wyciekać z dyszy "
"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie \"Wygładź"
"\" do czyszczenia dyszy."
"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie "
"\"Wygładź\" do czyszczenia dyszy."
msgid "Traditional"
msgstr "Tradycyjny"
@ -12221,10 +12226,10 @@ msgid ""
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar"
"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć "
"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na "
"rozsądnie niskim poziomie."
"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania "
"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może "
"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej "
"wartości na rozsądnie niskim poziomie."
msgid "Slicing Mode"
msgstr "Tryb cięcia"
@ -14527,8 +14532,8 @@ msgstr ""
"Czy chcesz go zastąpić?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Nazwa profilu zostanie zmieniona na \"Producent Typ Rodzaj @nazwa drukarki, "
@ -16450,8 +16455,8 @@ msgstr ""
#~ "Elevation is too low for object. Use the \"Pad around object\" feature to "
#~ "print the object without elevation."
#~ msgstr ""
#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół modelu"
#~ "\", aby wydrukować model bez podniesienia."
#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół "
#~ "modelu\", aby wydrukować model bez podniesienia."
#~ msgid ""
#~ "The endings of the support pillars will be deployed on the gap between "
@ -16956,8 +16961,8 @@ msgstr ""
#~ "the front door and/or remove the upper glass."
#~ msgstr ""
#~ "Aktualna temperatura stołu drukującego jest stosunkowo wysoka. Dysza może "
#~ "się zatkać podczas drukowania tego filamentu w zamkniętej obudowie. "
#~ "Proszę otworzyć drzwi przednie i/lub zdjąć górny panel."
#~ "się zatkać podczas drukowania tego filamentu w zamkniętej obudowie. "
#~ "Proszę otworzyć drzwi przednie i/lub zdjąć górny panel."
#~ msgid ""
#~ "The nozzle hardness required by the filament is higher than the default "

114
localization/i18n/ru/OrcaSlicer_ru.po
View file

@ -5,18 +5,18 @@
#
msgid ""
msgstr ""
"Project-Id-Version: OrcaSlicer V2.0.0 beta\n"
"Project-Id-Version: OrcaSlicer V2.0.0 RC\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-29 21:10+0800\n"
"PO-Revision-Date: 2024-03-17 18:48+0700\n"
"PO-Revision-Date: 2024-03-30 17:42+0700\n"
"Last-Translator: \n"
"Language-Team: andylg@yandex.ru\n"
"Language: ru_RU\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"X-Generator: Poedit 3.4.2\n"
msgid "Supports Painting"
@ -3436,6 +3436,8 @@ msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. "
msgstr ""
"Чередующаяся дополнительная стенка не работает, если для \"Обеспечивать "
"верт. толщину оболочки\" установлено значение «Везде»."
msgid ""
"Change these settings automatically? \n"
@ -3443,6 +3445,10 @@ msgid ""
"alternate extra wall\n"
"No - Dont use alternate extra wall"
msgstr ""
"Изменить эти настройки автоматически?\n"
"Да - Изменить в «Обеспечивать верт. толщину оболочки» на значение "
"«Умеренное» и включить чередующуюся дополнительную стенку\n"
"Нет - Отказаться от использования чередующейся дополнительной стенки"
msgid ""
"Prime tower does not work when Adaptive Layer Height or Independent Support "
@ -3492,6 +3498,8 @@ msgid ""
"seam_slope_start_height need to be smaller than layer_height.\n"
"Reset to 0."
msgstr ""
"seam_slope_start_height должна быть меньше высоты слоя.\n"
"Значение сброшено на 0."
msgid "Auto bed leveling"
msgstr "Автовыравнивание стола"
@ -4225,7 +4233,7 @@ msgstr "Имя хоста или IP-адрес"
# ??? Пользовательская камера
msgid "Custom camera source"
msgstr "Источник пользовательской камеры"
msgstr "Пользовательский источник камеры"
msgid "Show \"Live Video\" guide page."
msgstr "Показать страницу руководства «Прямая трансляция»."
@ -6187,7 +6195,7 @@ msgid "Stealth Mode"
msgstr "Режим конфиденциальности (отключение телеметрии Bambulab)"
msgid "Enable network plugin"
msgstr ""
msgstr "Включить сетевой плагин"
msgid "Check for stable updates only"
msgstr "Уведомлять только о стабильных версиях программы"
@ -6255,7 +6263,7 @@ msgstr ""
"каждом изменении цвета."
msgid "Network"
msgstr ""
msgstr "Сеть"
msgid "Auto sync user presets(Printer/Filament/Process)"
msgstr "Автосинхронизация пользовательских профилей (принтера/прутка/процесса)"
@ -6965,8 +6973,8 @@ msgid ""
"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
msgstr ""
"Перед использованием устройства Bambu Lab ознакомьтесь с правилами и "
"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu Lab"
"\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu "
"Lab\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
"использования (далее - \"Условия\"). Если вы не соблюдаете или не согласны с "
"Политикой конфиденциальности Bambu Lab, пожалуйста, не пользуйтесь "
"оборудованием и услугами Bambu Lab."
@ -7147,8 +7155,8 @@ msgstr "Игнорировать"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"При записи таймлапса без видимости головы рекомендуется добавить «Черновая "
"башня таймлапса». \n"
@ -8810,6 +8818,12 @@ msgid ""
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
"Значение ускорения перемещения превышает значение заданное в настройках "
"принтера (machine_max_acceleration_travel).\n"
"Программа автоматически ограничит это ускорение, чтобы оно не превышало "
"возможности принтера. \n"
"Если хотите получить более высокие скорости, вы можете изменить это значение "
"в настройках принтера (вкладка «Ограничение принтера»)."
msgid "Generating skirt & brim"
msgstr "Генерация юбки и каймы"
@ -8894,10 +8908,10 @@ msgid "Printer preset names"
msgstr "Имена профиля принтера"
msgid "Use 3rd-party print host"
msgstr ""
msgstr "Использовать сторонний хост печати"
msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
msgstr ""
msgstr "Позволяет управлять принтером BambuLab через сторонние хосты печати."
msgid "Hostname, IP or URL"
msgstr "Имя хоста, IP/URL-адрес"
@ -9178,7 +9192,6 @@ msgstr ""
msgid "Cooling overhang threshold"
msgstr "Порог включения обдува на нависаниях"
#, fuzzy, c-format
msgid ""
"Force cooling fan to be specific speed when overhang degree of printed part "
"exceeds this value. Expressed as percentage which indicides how much width "
@ -9375,7 +9388,7 @@ msgstr ""
"степени их нависания."
msgid "Bridge counterbore holes"
msgstr ""
msgstr "Мост для зенкованных отверстий"
msgid ""
"This option creates bridges for counterbore holes, allowing them to be "
@ -10684,17 +10697,17 @@ msgstr "Полная скорость вентилятора на слое"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Скорость вентилятора будет нарастать линейно от нуля на слое "
"\"close_fan_the_first_x_layers\" до максимума на слое \"full_fan_speed_layer"
"\". Значение \"full_fan_speed_layer\" будет игнорироваться, если оно меньше "
"значения \"close_fan_the_first_x_layers\", в этом случае вентилятор будет "
"работать на максимально допустимой скорости на слое "
"\"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" до максимума на слое "
"\"full_fan_speed_layer\". Значение \"full_fan_speed_layer\" будет "
"игнорироваться, если оно меньше значения \"close_fan_the_first_x_layers\", в "
"этом случае вентилятор будет работать на максимально допустимой скорости на "
"слое \"close_fan_the_first_x_layers\" + 1."
msgid "Support interface fan speed"
msgstr "Скорость вентилятора на связующем слое"
@ -11927,13 +11940,14 @@ msgid ""
"(indicating the absence of sharp corners), a scarf joint seam will be used. "
"The default value is 155°."
msgstr ""
"Этот параметр задает пороговый угол для применения клиновидного шва.\n"
"Этот параметр задаёт пороговое значение угола для применения клиновидного "
"шва.\n"
"Если максимальный угол в контуре периметра превышает это значение (что "
"указывает на отсутствие острых углов), будет использован клиновидный шов. "
"Значение по умолчанию - 155°."
msgid "Conditional overhang threshold"
msgstr ""
msgstr "Пороговая величина нависания"
#, no-c-format, no-boost-format
msgid ""
@ -11943,6 +11957,11 @@ msgid ""
"at 40% of the external wall's width. Due to performance considerations, the "
"degree of overhang is estimated."
msgstr ""
"Этот параметр задаёт пороговое значение нависания для применения "
"клиновидного шва. Если неподдерживаемая часть периметра меньше этого "
"порогового значения, то будут применён клиновидный шов. Пороговое значение "
"по умолчанию установлено на 40% от ширины внешней периметра. Из соображений "
"производительности оценивается степень нависания."
msgid "Scarf joint speed"
msgstr "Скорость клиновидного шва"
@ -14138,7 +14157,7 @@ msgstr ""
"семейство = Basic - базовый, Matte - матовый)"
msgid "Pattern"
msgstr ""
msgstr "Шаблон"
msgid "Method"
msgstr "Метод"
@ -14475,7 +14494,7 @@ msgid "Export Log"
msgstr "Журнал экспорта"
msgid "OrcaSlicer Version:"
msgstr ""
msgstr "Версия OrcaSlicer:"
msgid "System Version:"
msgstr "Версия ОС:"
@ -14484,10 +14503,10 @@ msgid "DNS Server:"
msgstr "DNS-сервер:"
msgid "Test OrcaSlicer(GitHub)"
msgstr ""
msgstr "Тест доступности OrcaSlicer(GitHub)"
msgid "Test OrcaSlicer(GitHub):"
msgstr ""
msgstr "Тест доступности OrcaSlicer(GitHub):"
msgid "Test Bing.com"
msgstr "Тест Bing.com"
@ -14597,8 +14616,8 @@ msgstr ""
"Хотите перезаписать его?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n"
@ -15017,8 +15036,9 @@ msgstr "Не удалось получить действительную ссы
msgid "Success!"
msgstr "Успешно!"
# ??? Вы уверены, что хотите выйти, разлогиниться?
msgid "Are you sure to log out?"
msgstr ""
msgstr "Вы уверены, что хотите выйти из системы?"
msgid "Refresh Printers"
msgstr "Обновить принтеры"
@ -15052,7 +15072,7 @@ msgstr ""
"его в хранилище сертификатов/Keychain."
msgid "Login/Test"
msgstr ""
msgstr "Вход/Тест"
msgid "Connection to printers connected via the print host failed."
msgstr "Не удалось подключиться к принтерам, подключенным через хост печати."
@ -15190,45 +15210,51 @@ msgstr ""
"Ошибка: \"%2%\""
msgid "Connected to Obico successfully!"
msgstr ""
msgstr "Соединение с Obico успешно установлено."
msgid "Could not connect to Obico"
msgstr ""
msgstr "Не удалось подключиться к Obico"
msgid "Connected to SimplyPrint successfully!"
msgstr ""
msgstr "Соединение с SimplyPrint успешно установлено."
msgid "Could not connect to SimplyPrint"
msgstr ""
msgstr "Не удалось подключиться к SimplyPrint"
msgid "SimplyPrint account not linked. Go to Connect options to set it up."
msgstr ""
"Учётная запись SimplyPrint не привязана. Перейдите в раздел подключения для "
"настройки."
msgid ""
"File size exceeds the 100MB upload limit. Please upload your file through "
"the panel."
msgstr ""
"Размер файла превышает лимит загрузки в 100 МБ. Пожалуйста, загрузите файл "
"через панель."
msgid "Unknown error"
msgstr ""
msgstr "Неизвестная ошибка"
msgid "Connection to Flashforge works correctly."
msgstr ""
msgstr "Соединение с Flashforge успешно установлено."
msgid "Could not connect to Flashforge"
msgstr ""
msgstr "Не удалось подключиться к Flashforge"
msgid "The provided state is not correct."
msgstr ""
msgstr "Указано неверное состояние."
msgid "Please give the required permissions when authorizing this application."
msgstr ""
"Пожалуйста, предоставьте необходимые разрешения при авторизации этого "
"приложения."
msgid "Something unexpected happened when trying to log in, please try again."
msgstr ""
msgstr "При попытке войти произошла какая-то ошибка, попробуйте ещё раз."
msgid "User cancelled."
msgstr ""
msgstr "Отменено пользователем."
#: resources/data/hints.ini: [hint:Precise wall]
msgid ""

13
localization/i18n/tr/OrcaSlicer_tr.po
View file

@ -1,22 +1,17 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
msgid ""
msgstr ""
"Project-Id-Version: OrcaSlicer\n"
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-29 21:10+0800\n"
"PO-Revision-Date: 2024-03-29 21:50+0300\n"
"Last-Translator: Olcay ÖREN\n"
"Language-Team: Türkçe\n"
"Language: tr_TR\n"
"Language-Team: \n"
"Language: tr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
"X-Generator: Poedit 3.3.2\n"
"X-Loco-Version: 2.6.4-dev; wp-6.3.1\n"
"X-Generator: Poedit 3.4.1\n"
msgid "Supports Painting"
msgstr "Destek Boyama"

16
resources/profiles/Creality.json
View file

@ -295,8 +295,8 @@
"sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.2.json"
},
{
"name": "0.12mm Fine @Creality Ender3V3SE",
"sub_path": "process/0.12mm Fine @Creality Ender3V3SE.json"
"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
"sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.4.json"
},
{
"name": "0.12mm Fine @Creality Ender3V3SE 0.6",
@ -403,8 +403,8 @@
"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.2.json"
},
{
"name": "0.16mm Optimal @Creality Ender3V3SE",
"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE.json"
"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
"sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.4.json"
},
{
"name": "0.16mm Optimal @Creality Ender3V3SE 0.6",
@ -563,8 +563,8 @@
"sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.2.json"
},
{
"name": "0.20mm Standard @Creality Ender3V3SE",
"sub_path": "process/0.20mm Standard @Creality Ender3V3SE.json"
"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
"sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.4.json"
},
{
"name": "0.20mm Standard @Creality Ender3V3SE 0.6",
@ -679,8 +679,8 @@
"sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.2.json"
},
{
"name": "0.24mm Draft @Creality Ender3V3SE",
"sub_path": "process/0.24mm Draft @Creality Ender3V3SE.json"
"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
"sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.4.json"
},
{
"name": "0.24mm Draft @Creality Ender3V3SE 0.6",

27
resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
View file

@ -47,12 +47,12 @@
"8000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
@ -71,12 +71,12 @@
"5"
],
"machine_max_jerk_x": [
"10",
"10"
"7",
"7"
],
"machine_max_jerk_y": [
"10",
"10"
"7",
"7"
],
"machine_max_jerk_z": [
"0.4",
@ -91,8 +91,11 @@
"retraction_minimum_travel": [
"2"
],
"wipe_distance": [
"2"
],
"retract_before_wipe": [
"70%"
"0%"
],
"retraction_length": [
"0.5"
@ -116,11 +119,11 @@
"default_filament_profile": [
"Creality Generic PLA @Ender-3V3-all"
],
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X-1.7 Y30 Z0.28 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z20 ;Raise Z more\nG90 ;Absolute positionning\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"thumbnails": [
"96x96",
"300x300"
]
}
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json
View file

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

37
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
View file

@ -10,7 +10,7 @@
"printer_variant": "0.4",
"gcode_flavor": "marlin2",
"printer_structure": "i3",
"default_print_profile": "0.20mm Standard @Creality Ender3V3SE",
"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.4",
"extruder_clearance_height_to_rod": "47",
"extruder_clearance_max_radius": "90",
"extruder_clearance_radius": "90",
@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json
View file

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json
View file

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

40
resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
View file

@ -13,7 +13,7 @@
"bottom_shell_layers": "5",
"bottom_shell_thickness": "0",
"bridge_flow": "0.95",
"bridge_speed": "100",
"bridge_speed": "65",
"brim_type": "no_brim",
"brim_width": "5",
"brim_object_gap": "0.1",
@ -23,21 +23,21 @@
"top_surface_acceleration": "5000",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"elefant_foot_compensation": "0.1",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.42",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.4",
"line_width": "0.42",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_acceleration": "500",
"initial_layer_acceleration": "1000",
"travel_acceleration": "5000",
"inner_wall_acceleration": "5000",
"outer_wall_acceleration": "2500",
"outer_wall_acceleration": "5000",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.2",
"infill_combination": "0",
"infill_combination": "1",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "25%",
"interface_shells": "0",
@ -49,10 +49,10 @@
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_2_4_speed": "50",
"overhang_3_4_speed": "35",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.42",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
@ -69,9 +69,9 @@
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.15",
"support_top_z_distance": "0.16",
"support_filament": "0",
"support_line_width": "0.38",
"support_line_width": "0.42",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "4",
@ -88,30 +88,30 @@
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_surface_line_width": "0.42",
"top_shell_layers": "5",
"top_shell_thickness": "0.8",
"initial_layer_speed": "50",
"initial_layer_infill_speed": "105",
"outer_wall_speed": "250",
"inner_wall_speed": "300",
"internal_solid_infill_speed": "300",
"internal_solid_infill_speed": "250",
"top_surface_speed": "250",
"gap_infill_speed": "100",
"gap_infill_speed": "200",
"sparse_infill_speed": "300",
"travel_speed": "300",
"travel_speed": "400",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"default_jerk": "7",
"outer_wall_jerk": "8",
"outer_wall_jerk": "7",
"inner_wall_jerk": "7",
"infill_jerk": "8",
"infill_jerk": "7",
"top_surface_jerk": "7",
"initial_layer_jerk": "7",
"travel_jerk": "8",
"travel_jerk": "7",
"compatible_printers": [
"Creality Ender-3 V3 KE 0.4 nozzle"
]

4
resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json → resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json
View file

@ -1,7 +1,7 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.12mm Fine @Creality Ender3V3SE",
"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
"from": "system",
"inherits": "fdm_process_creality_common",
"instantiation": "true",
@ -113,6 +113,6 @@
"initial_layer_jerk": "8",
"travel_jerk": "8",
"compatible_printers": [
"Creality Ender-3 V3 SE"
"Creality Ender-3 V3 SE 0.4 nozzle"
]
}

38
resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
View file

@ -13,7 +13,7 @@
"bottom_shell_layers": "4",
"bottom_shell_thickness": "0",
"bridge_flow": "0.95",
"bridge_speed": "100",
"bridge_speed": "65",
"brim_type": "no_brim",
"brim_width": "5",
"brim_object_gap": "0.1",
@ -23,21 +23,21 @@
"top_surface_acceleration": "5000",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"elefant_foot_compensation": "0.1",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.42",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.4",
"line_width": "0.42",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_acceleration": "500",
"initial_layer_acceleration": "1000",
"travel_acceleration": "5000",
"inner_wall_acceleration": "5000",
"outer_wall_acceleration": "2500",
"outer_wall_acceleration": "5000",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.2",
"infill_combination": "0",
"infill_combination": "1",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "25%",
"interface_shells": "0",
@ -49,10 +49,10 @@
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_2_4_speed": "50",
"overhang_3_4_speed": "35",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.42",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
@ -71,7 +71,7 @@
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.2",
"support_filament": "0",
"support_line_width": "0.38",
"support_line_width": "0.42",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
@ -88,30 +88,30 @@
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_surface_line_width": "0.42",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "50",
"initial_layer_infill_speed": "105",
"outer_wall_speed": "250",
"inner_wall_speed": "300",
"internal_solid_infill_speed": "300",
"internal_solid_infill_speed": "250",
"top_surface_speed": "250",
"gap_infill_speed": "100",
"gap_infill_speed": "200",
"sparse_infill_speed": "300",
"travel_speed": "300",
"travel_speed": "400",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"default_jerk": "7",
"outer_wall_jerk": "8",
"outer_wall_jerk": "7",
"inner_wall_jerk": "7",
"infill_jerk": "8",
"infill_jerk": "7",
"top_surface_jerk": "7",
"initial_layer_jerk": "7",
"travel_jerk": "8",
"travel_jerk": "7",
"compatible_printers": [
"Creality Ender-3 V3 KE 0.4 nozzle"
]

4
resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json → resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json
View file

@ -1,7 +1,7 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.16mm Optimal @Creality Ender3V3SE",
"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
"from": "system",
"inherits": "fdm_process_creality_common",
"instantiation": "true",
@ -113,6 +113,6 @@
"initial_layer_jerk": "8",
"travel_jerk": "8",
"compatible_printers": [
"Creality Ender-3 V3 SE"
"Creality Ender-3 V3 SE 0.4 nozzle"
]
}

40
resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
View file

@ -13,7 +13,7 @@
"bottom_shell_layers": "4",
"bottom_shell_thickness": "0",
"bridge_flow": "0.95",
"bridge_speed": "100",
"bridge_speed": "65",
"brim_type": "no_brim",
"brim_width": "5",
"brim_object_gap": "0.1",
@ -23,21 +23,21 @@
"top_surface_acceleration": "5000",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"elefant_foot_compensation": "0.1",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.42",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.4",
"line_width": "0.42",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_acceleration": "500",
"initial_layer_acceleration": "1000",
"travel_acceleration": "5000",
"inner_wall_acceleration": "5000",
"outer_wall_acceleration": "2500",
"outer_wall_acceleration": "5000",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.2",
"infill_combination": "0",
"infill_combination": "1",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "25%",
"interface_shells": "0",
@ -49,10 +49,10 @@
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_2_4_speed": "50",
"overhang_3_4_speed": "35",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.42",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
@ -69,9 +69,9 @@
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.15",
"support_top_z_distance": "0.16",
"support_filament": "0",
"support_line_width": "0.38",
"support_line_width": "0.42",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "2",
@ -88,30 +88,30 @@
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_surface_line_width": "0.42",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "50",
"initial_layer_infill_speed": "105",
"outer_wall_speed": "250",
"inner_wall_speed": "300",
"internal_solid_infill_speed": "300",
"internal_solid_infill_speed": "250",
"top_surface_speed": "250",
"gap_infill_speed": "100",
"gap_infill_speed": "200",
"sparse_infill_speed": "300",
"travel_speed": "300",
"travel_speed": "400",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"default_jerk": "7",
"outer_wall_jerk": "8",
"outer_wall_jerk": "7",
"inner_wall_jerk": "7",
"infill_jerk": "8",
"infill_jerk": "7",
"top_surface_jerk": "7",
"initial_layer_jerk": "7",
"travel_jerk": "8",
"travel_jerk": "7",
"compatible_printers": [
"Creality Ender-3 V3 KE 0.4 nozzle"
]

4
resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json → resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json
View file

@ -1,7 +1,7 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.20mm Standard @Creality Ender3V3SE",
"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
"from": "system",
"inherits": "fdm_process_creality_common",
"instantiation": "true",
@ -113,6 +113,6 @@
"initial_layer_jerk": "8",
"travel_jerk": "8",
"compatible_printers": [
"Creality Ender-3 V3 SE"
"Creality Ender-3 V3 SE 0.4 nozzle"
]
}

40
resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
View file

@ -13,7 +13,7 @@
"bottom_shell_layers": "4",
"bottom_shell_thickness": "0",
"bridge_flow": "0.95",
"bridge_speed": "100",
"bridge_speed": "65",
"brim_type": "no_brim",
"brim_width": "5",
"brim_object_gap": "0.1",
@ -23,21 +23,21 @@
"top_surface_acceleration": "5000",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"elefant_foot_compensation": "0.1",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.42",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.4",
"line_width": "0.42",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_acceleration": "500",
"initial_layer_acceleration": "1000",
"travel_acceleration": "5000",
"inner_wall_acceleration": "5000",
"outer_wall_acceleration": "2500",
"outer_wall_acceleration": "5000",
"initial_layer_line_width": "0.5",
"initial_layer_print_height": "0.2",
"infill_combination": "0",
"infill_combination": "1",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "25%",
"interface_shells": "0",
@ -49,10 +49,10 @@
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_2_4_speed": "50",
"overhang_3_4_speed": "35",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.42",
"inner_wall_line_width": "0.45",
"wall_loops": "2",
"print_settings_id": "",
"raft_layers": "0",
@ -69,9 +69,9 @@
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_top_z_distance": "0.15",
"support_top_z_distance": "0.16",
"support_filament": "0",
"support_line_width": "0.38",
"support_line_width": "0.42",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "2",
@ -88,30 +88,30 @@
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_surface_line_width": "0.42",
"top_shell_layers": "4",
"top_shell_thickness": "0.8",
"initial_layer_speed": "50",
"initial_layer_infill_speed": "105",
"outer_wall_speed": "250",
"inner_wall_speed": "300",
"internal_solid_infill_speed": "300",
"internal_solid_infill_speed": "250",
"top_surface_speed": "250",
"gap_infill_speed": "100",
"gap_infill_speed": "200",
"sparse_infill_speed": "300",
"travel_speed": "300",
"travel_speed": "400",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"default_jerk": "7",
"outer_wall_jerk": "8",
"outer_wall_jerk": "7",
"inner_wall_jerk": "7",
"infill_jerk": "8",
"infill_jerk": "7",
"top_surface_jerk": "7",
"initial_layer_jerk": "7",
"travel_jerk": "8",
"travel_jerk": "7",
"compatible_printers": [
"Creality Ender-3 V3 KE 0.4 nozzle"
]

4
resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json → resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json
View file

@ -1,7 +1,7 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.24mm Draft @Creality Ender3V3SE",
"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
"from": "system",
"inherits": "fdm_process_creality_common",
"instantiation": "true",
@ -113,6 +113,6 @@
"initial_layer_jerk": "8",
"travel_jerk": "8",
"compatible_printers": [
"Creality Ender-3 V3 SE"
"Creality Ender-3 V3 SE 0.4 nozzle"
]
}

BIN
resources/profiles/Flashforge/flashfoge_adventurer5m_series_buildplate_model.STL
View file

Binary file not shown.

BIN
resources/profiles/Flashforge/flashforge_adventurer5m_series_buildplate_model.STL Normal file
View file

Binary file not shown.

0
resources/profiles/Flashforge/flashfoge_adventurer_5m_series_hotend.stl → resources/profiles/Flashforge/flashforge_adventurer_5m_series_hotend.stl
View file

2
resources/profiles/Flashforge/machine/Flashforge Adventurer 5M 0.6 Nozzle.json
View file

@ -61,7 +61,7 @@
"extruder_clearance_radius": [ "76" ],
"extruder_clearance_height_to_rod": [ "27" ],
"extruder_clearance_height_to_lid": [ "150" ],
"nozzle_type": "stainless_steel"
"nozzle_type": "hardened_steel"
}

2
resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro 0.6 Nozzle.json
View file

@ -61,6 +61,6 @@
"extruder_clearance_radius": [ "76" ],
"extruder_clearance_height_to_rod": [ "27" ],
"extruder_clearance_height_to_lid": [ "150" ],
"nozzle_type": "stainless_steel"
"nozzle_type": "hardened_steel"
}

4
resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json
View file

@ -5,8 +5,8 @@
"nozzle_diameter": "0.4;0.6",
"machine_tech": "FFF",
"family": "Flashforge",
"bed_model": "flashfoge_adventurer5m_series_buildplate_model.STL",
"bed_model": "flashforge_adventurer5m_series_buildplate_model.STL",
"bed_texture": "flashforge_adventurer5m_buildplate_texture.png",
"hotend_model": "",
"hotend_model": "flashforge_adventurer_5m_series_hotend.STL",
"default_materials": "Flashforge Generic ABS;Flashforge Generic PETG;Flashforge Generic PLA"
}

4
resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json
View file

@ -5,8 +5,8 @@
"nozzle_diameter": "0.4;0.6",
"machine_tech": "FFF",
"family": "Flashforge",
"bed_model": "flashfoge_adventurer5m_series_buildplate_model.STL",
"bed_model": "flashforge_adventurer5m_series_buildplate_model.STL",
"bed_texture": "flashforge_adventurer5m_buildplate_texture.png",
"hotend_model": "",
"hotend_model": "flashforge_adventurer_5m_series_hotend.STL",
"default_materials": "Flashforge Generic ABS;Flashforge Generic PETG;Flashforge Generic PLA"
}

17
resources/profiles/Flashforge/machine/fdm_adventurer3_common.json
View file

@ -19,10 +19,10 @@
"machine_max_acceleration_x": [ "500" ],
"machine_max_acceleration_y": [ "500" ],
"machine_max_acceleration_z": [ "100" ],
"machine_max_speed_e": [ "60" ],
"machine_max_speed_e": [ "30" ],
"machine_max_speed_x": [ "150" ],
"machine_max_speed_y": [ "150" ],
"machine_max_speed_z": [ "10" ],
"machine_max_speed_z": [ "20" ],
"machine_max_jerk_e": [ "2.5" ],
"machine_max_jerk_x": [ "8" ],
"machine_max_jerk_y": [ "8" ],
@ -36,11 +36,13 @@
"deretraction_speed": [ "25" ],
"z_hop": [ "0.4" ],
"single_extruder_multi_material": "1",
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M25",
"default_filament_profile": [ "Flashforge PLA" ],
"machine_start_gcode": "M140 S[bed_temperature_initial_layer] T0\nM104 S[nozzle_temperature_initial_layer] T0\nM104 S0 T1\nM107\nM900 K[pressure_advance] T0\nG90\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255",
"machine_end_gcode": "M104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer] T0\nM104 S[nozzle_temperature_initial_layer] T0\nM104 S0 T1\nM107\nM900 K[pressure_advance] T0\nG90\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;pre-extrude\nM108 T0\nG1 X-37.50 Y-75.00 F6000\nM106\nG1 Z0.200 F420\nG1 X-37.50 Y-75.00 F6000\nG1 X37.50 Y-75.00 E9.5 F1200\n",
"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F9000\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0",
@ -53,5 +55,10 @@
"extruder_clearance_height_to_lid": "150",
"manual_filament_change": "1",
"nozzle_type": "stainless_steel",
"auxiliary_fan": "0"
"auxiliary_fan": "1",
"parking_pos_retraction": "0",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"extra_loading_move": "0",
"version": "2.0.2.0"
}

4
resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json
View file

@ -43,8 +43,7 @@
"enable_arc_fitting": "0",
"initial_layer_min_bead_width": "100",
"min_bead_width": "100",
"detect_thin_wall": "1",
"elefant_foot_compensation": "0",
"elefant_foot_compensation": "0.15",
"small_perimeter_speed": "50%",
"overhang_speed_classic": "0",
"internal_bridge_speed": "48",
@ -54,6 +53,7 @@
"slow_down_layers": "1",
"wipe_speed": "200",
"reduce_crossing_wall": "1",
"max_travel_detour_distance": "50",
"compatible_printers": [
"Flashforge Adventurer 3 Series 0.4 Nozzle"
],

4
resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json
View file

@ -43,8 +43,7 @@
"enable_arc_fitting": "0",
"initial_layer_min_bead_width": "100",
"min_bead_width": "100",
"detect_thin_wall": "1",
"elefant_foot_compensation": "0",
"elefant_foot_compensation": "0.15",
"small_perimeter_speed": "50%",
"overhang_speed_classic": "0",
"internal_bridge_speed": "64",
@ -54,6 +53,7 @@
"slow_down_layers": "1",
"wipe_speed": "200",
"reduce_crossing_wall": "1",
"max_travel_detour_distance": "50",
"compatible_printers": [
"Flashforge Adventurer 3 Series 0.4 Nozzle"
],

4
resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json
View file

@ -43,8 +43,7 @@
"enable_arc_fitting": "0",
"initial_layer_min_bead_width": "100",
"min_bead_width": "100",
"detect_thin_wall": "1",
"elefant_foot_compensation": "0",
"elefant_foot_compensation": "0.15",
"small_perimeter_speed": "50%",
"overhang_speed_classic": "0",
"internal_bridge_speed": "50",
@ -54,6 +53,7 @@
"slow_down_layers": "1",
"wipe_speed": "200",
"reduce_crossing_wall": "1",
"max_travel_detour_distance": "50",
"compatible_printers": [
"Flashforge Adventurer 3 Series 0.6 Nozzle"
],

12
resources/profiles/Kingroon.json
View file

@ -12,6 +12,10 @@
{
"name": "Kingroon KP3S PRO V2",
"sub_path": "machine/Kingroon KP3S PRO V2.json"
},
{
"name": "Kingroon KP3S 3.0",
"sub_path": "machine/Kingroon KP3S 3.0.json"
}
],
"process_list": [
@ -34,6 +38,10 @@
{
"name": "0.20mm Standard @Kingroon KP3S PRO V2",
"sub_path": "process/0.20mm Standard @Kingroon KP3S PRO V2.json"
},
{
"name": "0.30mm Standard @Kingroon KP3S 3.0",
"sub_path": "process/0.30mm Standard @Kingroon KP3S 3.0.json"
}
],
"filament_list": [
@ -130,6 +138,10 @@
{
"name": "Kingroon KP3S PRO V2 0.4 nozzle",
"sub_path": "machine/Kingroon KP3S PRO V2 0.4 nozzle.json"
},
{
"name": "Kingroon KP3S 0.4 nozzle",
"sub_path": "machine/Kingroon KP3S 3.0 0.4 nozzle.json"
}
]
}

BIN
resources/profiles/Kingroon/Kingroon KP3S 3.0_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 43 KiB

3
resources/profiles/Kingroon/filament/Kingroon Generic ABS.json
View file

@ -14,6 +14,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic ASA.json
View file

@ -14,6 +14,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PA-CF.json
View file

@ -20,6 +20,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PA.json
View file

@ -17,6 +17,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PC.json
View file

@ -14,6 +14,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PETG.json
View file

@ -44,6 +44,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PLA-CF.json
View file

@ -20,6 +20,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PLA.json
View file

@ -8,6 +8,7 @@
"inherits": "fdm_filament_pla",
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic PVA.json
View file

@ -20,6 +20,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

3
resources/profiles/Kingroon/filament/Kingroon Generic TPU.json
View file

@ -11,6 +11,7 @@
],
"compatible_printers": [
"Kingroon KP3S PRO S1 0.4 nozzle",
"Kingroon KP3S PRO V2 0.4 nozzle"
"Kingroon KP3S PRO V2 0.4 nozzle",
"Kingroon KP3S 3.0 0.4 nozzle"
]
}

96
resources/profiles/Kingroon/machine/Kingroon KP3S 3.0 0.4 nozzle.json Normal file
View file

@ -0,0 +1,96 @@
{
"setting_id": "GM003",
"name": "Kingroon KP3S 3.0 0.4 nozzle",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Kingroon KP3S 3.0",
"default_print_profile": "0.30mm Standard @Kingroon KP3S 3.0",
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\n M117 Purge extruder\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
"type": "machine",
"nozzle_diameter": ["0.4"],
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"fan_speedup_overhangs": "0",
"fan_speedup_time": "1",
"from": "system",
"machine_max_acceleration_e": [
"10000",
"5000"
],
"machine_max_acceleration_extruding": [
"10000",
"9000"
],
"machine_max_acceleration_retracting": [
"10000",
"9000"
],
"machine_max_acceleration_x": [
"4000",
"9000"
],
"machine_max_acceleration_y": [
"4000",
"9000"
],
"machine_max_acceleration_z": [
"1100",
"100"
],
"machine_max_speed_e": [
"50",
"60"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"30",
"12"
],
"manual_filament_change": "1",
"min_layer_height": [
"0.1"
],
"nozzle_type": "brass",
"parking_pos_retraction": "0",
"printable_area": [
"0x0",
"180x0",
"180x180",
"0x180"
],
"printable_height": "180",
"purge_in_prime_tower": "0",
"retract_length_toolchange": [
"0.5"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.3"
],
"retraction_minimum_travel": [
"3"
],
"retraction_speed": [
"30"
],
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"wipe": [
"1"
],
"z_hop": [
"0.2"
]
}

12
resources/profiles/Kingroon/machine/Kingroon KP3S 3.0.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "Kingroon KP3S 3.0",
"model_id": "Kingroon KP3S 3.0",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Kingroon",
"bed_model": "kp3s_bed.stl",
"bed_texture": "Kingroon_buildplate.png",
"hotend_model": "",
"default_materials": "Kingroon Generic ABS;Kingroon Generic PLA;Kingroon Generic PLA-CF;Kingroon Generic PETG;Kingroon Generic TPU;Kingroon Generic ASA;Kingroon Generic PC;Kingroon Generic PVA;Kingroon Generic PA;Kingroon Generic PA-CF"
}

87
resources/profiles/Kingroon/process/0.30mm Standard @Kingroon KP3S 3.0.json Normal file
View file

@ -0,0 +1,87 @@
{
"type": "process",
"compatible_printers": [
"Kingroon KP3S 3.0 0.4 nozzle"
],
"name": "0.30mm Standard @Kingroon KP3S 3.0",
"inherits": "fdm_process_common",
"print_settings_id": "0.30mm Standard @Kingroon KP3S 3.0",
"bottom_surface_pattern": "monotonicline",
"bridge_acceleration": "500",
"bridge_speed": "30",
"brim_type": "no_brim",
"default_acceleration": "500",
"detect_narrow_internal_solid_infill": "0",
"dont_filter_internal_bridges": "limited",
"elefant_foot_compensation": "0.2",
"enable_prime_tower": "1",
"enable_support": "0",
"filter_out_gap_fill": "0.9",
"flush_into_support": "0",
"from": "User",
"gap_fill_target": "topbottom",
"gap_infill_speed": "40",
"infill_combination": "1",
"initial_layer_acceleration": "500",
"initial_layer_infill_speed": "50",
"initial_layer_print_height": "0.3",
"initial_layer_speed": "20",
"initial_layer_travel_speed": "250",
"inner_wall_acceleration": "700",
"inner_wall_line_width": "0.44",
"inner_wall_speed": "70",
"internal_bridge_speed": "50",
"internal_solid_infill_acceleration": "2000",
"internal_solid_infill_line_width": "0.5",
"internal_solid_infill_pattern": "monotonicline",
"internal_solid_infill_speed": "70",
"is_custom_defined": "0",
"layer_height": "0.3",
"line_width": "0.44",
"max_travel_detour_distance": "70",
"max_volumetric_extrusion_rate_slope": "20",
"outer_wall_acceleration": "500",
"outer_wall_line_width": "0.44",
"outer_wall_speed": "50",
"overhang_1_4_speed": "70%",
"overhang_2_4_speed": "50%",
"overhang_3_4_speed": "30%",
"overhang_4_4_speed": "20%",
"prime_tower_brim_width": "1",
"prime_tower_width": "20",
"prime_volume": "30",
"raft_first_layer_density": "100%",
"reduce_crossing_wall": "1",
"reduce_infill_retraction": "0",
"scarf_joint_speed": "70",
"seam_gap": "0",
"seam_slope_entire_loop": "1",
"seam_slope_start_height": "0.1",
"skirt_loops": "1",
"sparse_infill_acceleration": "1500",
"sparse_infill_line_width": "0.5",
"sparse_infill_pattern": "3dhoneycomb",
"sparse_infill_speed": "70",
"support_base_pattern": "default",
"support_interface_pattern": "auto",
"support_interface_speed": "40",
"support_line_width": "0.44",
"support_speed": "70",
"support_threshold_angle": "40",
"support_type": "normal(auto)",
"top_surface_acceleration": "500",
"top_surface_line_width": "0.44",
"top_surface_pattern": "monotonicline",
"top_surface_speed": "40",
"travel_acceleration": "4000",
"travel_speed": "250",
"tree_support_angle_slow": "35",
"tree_support_branch_angle_organic": "45",
"tree_support_branch_diameter_double_wall": "5",
"tree_support_tip_diameter": "1",
"tree_support_top_rate": "50%",
"version": "2.0.0.0",
"wall_transition_angle": "59",
"wipe_before_external_loop": "1",
"wipe_tower_bridging": "2"
}

226
resources/profiles/MagicMaker.json Normal file
View file

@ -0,0 +1,226 @@
{
"name": "MagicMaker",
"version": "02.00.00.00",
"force_update": "0",
"description": "MagicMaker configurations",
"machine_model_list": [
{
"name": "MM hqs hj",
"sub_path": "machine/MM hqs hj.json"
},
{
"name": "MM hqs SF",
"sub_path": "machine/MM hqs SF.json"
},
{
"name": "MM hj SK",
"sub_path": "machine/MM hj SK.json"
},
{
"name": "MM BoneKing",
"sub_path": "machine/MM BoneKing.json"
},
{
"name": "MM slb",
"sub_path": "machine/MM slb.json"
}
],
"process_list": [
{
"name": "fdm_process_common",
"sub_path": "process/fdm_process_common.json"
},
{
"name": "0.10mm Fine @MM slb",
"sub_path": "process/0.10mm Fine @MM slb.json"
},
{
"name": "0.20mm Standard @MM slb",
"sub_path": "process/0.20mm Standard @MM slb.json"
},
{
"name": "0.30mm Draft @MM slb",
"sub_path": "process/0.30mm Draft @MM slb.json"
},
{
"name": "0.10mm Fine @MM hqs hj",
"sub_path": "process/0.10mm Fine @MM hqs hj.json"
},
{
"name": "0.20mm Standard @MM hqs hj",
"sub_path": "process/0.20mm Standard @MM hqs hj.json"
},
{
"name": "0.30mm Draft @MM hqs hj",
"sub_path": "process/0.30mm Draft @MM hqs hj.json"
},
{
"name": "0.10mm Fine @MM hqs SF",
"sub_path": "process/0.10mm Fine @MM hqs SF.json"
},
{
"name": "0.20mm Standard @MM hqs SF",
"sub_path": "process/0.20mm Standard @MM hqs SF.json"
},
{
"name": "0.30mm Draft @MM hqs SF",
"sub_path": "process/0.30mm Draft @MM hqs SF.json"
},
{
"name": "0.10mm Fine Fast @MM hqs SF",
"sub_path": "process/0.10mm Fine Fast @MM hqs SF.json"
},
{
"name": "0.20mm Standard Fast @MM hqs SF",
"sub_path": "process/0.20mm Standard Fast @MM hqs SF.json"
},
{
"name": "0.30mm Draft Fast @MM hqs SF",
"sub_path": "process/0.30mm Draft Fast @MM hqs SF.json"
},
{
"name": "0.10mm Fine @MM hj SK",
"sub_path": "process/0.10mm Fine @MM hj SK.json"
},
{
"name": "0.20mm Standard @MM hj SK",
"sub_path": "process/0.20mm Standard @MM hj SK.json"
},
{
"name": "0.30mm Draft @MM hj SK",
"sub_path": "process/0.30mm Draft @MM hj SK.json"
},
{
"name": "0.10mm Fine Fast @MM hj SK",
"sub_path": "process/0.10mm Fine Fast @MM hj SK.json"
},
{
"name": "0.20mm Standard Fast @MM hj SK",
"sub_path": "process/0.20mm Standard Fast @MM hj SK.json"
},
{
"name": "0.30mm Draft Fast @MM hj SK",
"sub_path": "process/0.30mm Draft Fast @MM hj SK.json"
},
{
"name": "0.10mm Fine @MM BoneKing",
"sub_path": "process/0.10mm Fine @MM BoneKing.json"
},
{
"name": "0.20mm Standard @MM BoneKing",
"sub_path": "process/0.20mm Standard @MM BoneKing.json"
},
{
"name": "0.30mm Draft @MM BoneKing",
"sub_path": "process/0.30mm Draft @MM BoneKing.json"
},
{
"name": "0.10mm Fine Fast @MM BoneKing",
"sub_path": "process/0.10mm Fine Fast @MM BoneKing.json"
},
{
"name": "0.20mm Standard Fast @MM BoneKing",
"sub_path": "process/0.20mm Standard Fast @MM BoneKing.json"
},
{
"name": "0.30mm Draft Fast @MM BoneKing",
"sub_path": "process/0.30mm Draft Fast @MM BoneKing.json"
},
{
"name": "0.12mm Fine SuperFast @MM BoneKing",
"sub_path": "process/0.12mm Fine SuperFast @MM BoneKing.json"
},
{
"name": "0.12mm Fine BestFast @MM BoneKing",
"sub_path": "process/0.12mm Fine BestFast @MM BoneKing.json"
}
],
"filament_list": [
{
"name": "fdm_filament_common",
"sub_path": "filament/fdm_filament_common.json"
},
{
"name": "fdm_filament_pla",
"sub_path": "filament/fdm_filament_pla.json"
},
{
"name": "fdm_filament_pet",
"sub_path": "filament/fdm_filament_pet.json"
},
{
"name": "fdm_filament_abs",
"sub_path": "filament/fdm_filament_abs.json"
},
{
"name": "fdm_filament_tpu",
"sub_path": "filament/fdm_filament_tpu.json"
},
{
"name": "fdm_filament_pc",
"sub_path": "filament/fdm_filament_pc.json"
},
{
"name": "fdm_filament_pa",
"sub_path": "filament/fdm_filament_pa.json"
},
{
"name": "fdm_filament_peek",
"sub_path": "filament/fdm_filament_peek.json"
},
{
"name": "MM Generic PLA",
"sub_path": "filament/MM Generic PLA.json"
},
{
"name": "MM Generic PETG",
"sub_path": "filament/MM Generic PETG.json"
},
{
"name": "MM Generic ABS",
"sub_path": "filament/MM Generic ABS.json"
},
{
"name": "MM Generic TPU",
"sub_path": "filament/MM Generic TPU.json"
},
{
"name": "MM Generic PC",
"sub_path": "filament/MM Generic PC.json"
},
{
"name": "MM Generic PA",
"sub_path": "filament/MM Generic PA.json"
},
{
"name": "MM Generic PEEK",
"sub_path": "filament/MM Generic PEEK.json"
}
],
"machine_list": [
{
"name": "fdm_machine_common",
"sub_path": "machine/fdm_machine_common.json"
},
{
"name": "MM hqs hj 0.4 nozzle",
"sub_path": "machine/MM hqs hj 0.4 nozzle.json"
},
{
"name": "MM hqs SF 0.4 nozzle",
"sub_path": "machine/MM hqs SF 0.4 nozzle.json"
},
{
"name": "MM hj SK 0.4 nozzle",
"sub_path": "machine/MM hj SK 0.4 nozzle.json"
},
{
"name": "MM BoneKing 0.4 nozzle",
"sub_path": "machine/MM BoneKing 0.4 nozzle.json"
},
{
"name": "MM slb 0.4 nozzle",
"sub_path": "machine/MM slb 0.4 nozzle.json"
}
]
}

BIN
resources/profiles/MagicMaker/120_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/125_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/150_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/160_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/220210_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/220_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/250_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/310_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/MM BoneKing_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 54 KiB

BIN
resources/profiles/MagicMaker/MM hj sk_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 50 KiB

BIN
resources/profiles/MagicMaker/MM hj_buildplate_model.stl Normal file
View file

Binary file not shown.

BIN
resources/profiles/MagicMaker/MM hqs SF_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 50 KiB

BIN
resources/profiles/MagicMaker/MM hqs hj_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 45 KiB

BIN
resources/profiles/MagicMaker/MM slb_cover.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 41 KiB

BIN
resources/profiles/MagicMaker/MM_buildplate_texture.png Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 7.6 KiB

54
resources/profiles/MagicMaker/filament/MM Generic ABS.json Normal file
View file

@ -0,0 +1,54 @@
{
"type": "filament",
"filament_id": "GFB99",
"setting_id": "GFSA04",
"is_custom_defined": "0",
"name": "MM Generic ABS",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_abs",
"filament_max_volumetric_speed": [
"50"
],
"fan_max_speed": [
"10"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"filament_flow_ratio": [
"1"
],
"full_fan_speed_layer": [
"5"
],
"hot_plate_temp": [
"100"
],
"hot_plate_temp_initial_layer": [
"100"
],
"nozzle_temperature": [
"240"
],
"nozzle_temperature_range_high": [
"250"
],
"nozzle_temperature_range_low": [
"230"
],
"slow_down_min_speed": [
"5"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle",
"MM slb 0.4 nozzle"
],
"version": "2.0.0.0"
}

32
resources/profiles/MagicMaker/filament/MM Generic PA.json Normal file
View file

@ -0,0 +1,32 @@
{
"type": "filament",
"filament_id": "GFB99",
"setting_id": "GFSA04",
"is_custom_defined": "0",
"name": "MM Generic PA",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pa",
"chamber_temperature": [
"60"
],
"fan_max_speed": [
"40"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"full_fan_speed_layer": [
"5"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle"
],
"version": "2.0.0.0"
}

35
resources/profiles/MagicMaker/filament/MM Generic PC.json Normal file
View file

@ -0,0 +1,35 @@
{
"type": "filament",
"filament_id": "GFB99",
"setting_id": "GFSA04",
"is_custom_defined": "0",
"name": "MM Generic PC",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pc",
"fan_max_speed": [
"40"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"filament_max_volumetric_speed": [
"15"
],
"full_fan_speed_layer": [
"5"
],
"nozzle_temperature": [
"270"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle"
],
"version": "2.0.0.0"
}

51
resources/profiles/MagicMaker/filament/MM Generic PEEK.json Normal file
View file

@ -0,0 +1,51 @@
{
"type": "filament",
"filament_id": "GFG99",
"setting_id": "GFSA04",
"name": "MM Generic PEEK",
"is_custom_defined": "0",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_peek",
"fan_max_speed": [
"40"
],
"filament_cost": [
"1000"
],
"filament_diameter": [
"1.75"
],
"filament_max_volumetric_speed": [
"10"
],
"full_fan_speed_layer": [
"5"
],
"hot_plate_temp": [
"60"
],
"hot_plate_temp_initial_layer": [
"60"
],
"nozzle_temperature": [
"420"
],
"nozzle_temperature_initial_layer": [
"420"
],
"nozzle_temperature_range_high": [
"460"
],
"nozzle_temperature_range_low": [
"380"
],
"temperature_vitrification": [
"340"
],
"compatible_printers": [
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle"
],
"version": "2.0.0.0"
}

87
resources/profiles/MagicMaker/filament/MM Generic PETG.json Normal file
View file

@ -0,0 +1,87 @@
{
"type": "filament",
"filament_id": "GFG99",
"setting_id": "GFSA04",
"name": "MM Generic PETG",
"is_custom_defined": "0",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pet",
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_cooling_layer_time": [
"30"
],
"overhang_fan_speed": [
"70"
],
"overhang_fan_threshold": [
"25%"
],
"fan_min_speed": [
"20"
],
"slow_down_layer_time": [
"5"
],
"filament_max_volumetric_speed": [
"50"
],
"filament_start_gcode": [
"; filament start gcode\n"
],
"chamber_temperature": [
"40"
],
"close_fan_the_first_x_layers": [
"2"
],
"fan_max_speed": [
"60"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"filament_flow_ratio": [
"1"
],
"filament_retraction_length": [
"2"
],
"full_fan_speed_layer": [
"4"
],
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"nozzle_temperature_initial_layer": [
"235"
],
"nozzle_temperature_range_high": [
"245"
],
"nozzle_temperature_range_low": [
"225"
],
"slow_down_min_speed": [
"10"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle",
"MM slb 0.4 nozzle"
],
"version": "2.0.0.0"
}

46
resources/profiles/MagicMaker/filament/MM Generic PLA.json Normal file
View file

@ -0,0 +1,46 @@
{
"type": "filament",
"filament_id": "GFL99",
"setting_id": "GFSA04",
"name": "MM Generic PLA",
"is_custom_defined": "0",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_pla",
"filament_max_volumetric_speed": [
"50"
],
"slow_down_layer_time": [
"5"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"filament_flow_ratio": [
"1"
],
"full_fan_speed_layer": [
"3"
],
"hot_plate_temp_initial_layer": [
"60"
],
"nozzle_temperature": [
"205"
],
"nozzle_temperature_range_high": [
"230"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle",
"MM slb 0.4 nozzle"
],
"version": "2.0.0.0"
}

58
resources/profiles/MagicMaker/filament/MM Generic TPU.json Normal file
View file

@ -0,0 +1,58 @@
{
"type": "filament",
"filament_id": "GFU99",
"setting_id": "GFSA04",
"name": "MM Generic TPU",
"is_custom_defined": "0",
"from": "system",
"instantiation": "true",
"inherits": "fdm_filament_tpu",
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"40"
],
"filament_cost": [
"100"
],
"filament_diameter": [
"1.75"
],
"filament_max_volumetric_speed": [
"3"
],
"filament_retraction_length": [
"0.5"
],
"full_fan_speed_layer": [
"3"
],
"hot_plate_temp": [
"45"
],
"hot_plate_temp_initial_layer": [
"45"
],
"nozzle_temperature": [
"220"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature_range_high": [
"240"
],
"slow_down_min_speed": [
"5"
],
"compatible_printers": [
"MM hqs hj 0.4 nozzle",
"MM hqs SF 0.4 nozzle",
"MM hj SK 0.4 nozzle",
"MM BoneKing 0.4 nozzle",
"MM slb 0.4 nozzle"
],
"version": "2.0.0.0"
}

88
resources/profiles/MagicMaker/filament/fdm_filament_abs.json Normal file
View file

@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_abs",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"80"
],
"eng_plate_temp" : [
"80"
],
"hot_plate_temp" : [
"80"
],
"textured_plate_temp" : [
"80"
],
"cool_plate_temp_initial_layer" : [
"80"
],
"eng_plate_temp_initial_layer" : [
"80"
],
"hot_plate_temp_initial_layer" : [
"80"
],
"textured_plate_temp_initial_layer" : [
"80"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"30"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_type": [
"ABS"
],
"filament_density": [
"1.10"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"240"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"5"
],
"fan_min_speed": [
"5"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"nozzle_temperature": [
"235"
],
"temperature_vitrification": [
"110"
],
"nozzle_temperature_range_low": [
"235"
],
"nozzle_temperature_range_high": [
"240"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"15"
]
}

88
resources/profiles/MagicMaker/filament/fdm_filament_asa.json Normal file
View file

@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_asa",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"105"
],
"eng_plate_temp" : [
"105"
],
"hot_plate_temp" : [
"105"
],
"textured_plate_temp" : [
"105"
],
"cool_plate_temp_initial_layer" : [
"105"
],
"eng_plate_temp_initial_layer" : [
"105"
],
"hot_plate_temp_initial_layer" : [
"105"
],
"textured_plate_temp_initial_layer" : [
"105"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"35"
],
"filament_max_volumetric_speed": [
"28.6"
],
"filament_type": [
"ASA"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"260"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"10"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"nozzle_temperature": [
"260"
],
"temperature_vitrification": [
"110"
],
"nozzle_temperature_range_low": [
"240"
],
"nozzle_temperature_range_high": [
"270"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"3"
]
}

144
resources/profiles/MagicMaker/filament/fdm_filament_common.json Normal file
View file

@ -0,0 +1,144 @@
{
"type": "filament",
"name": "fdm_filament_common",
"from": "system",
"instantiation": "false",
"cool_plate_temp" : [
"60"
],
"eng_plate_temp" : [
"60"
],
"hot_plate_temp" : [
"60"
],
"textured_plate_temp" : [
"60"
],
"cool_plate_temp_initial_layer" : [
"60"
],
"eng_plate_temp_initial_layer" : [
"60"
],
"hot_plate_temp_initial_layer" : [
"60"
],
"textured_plate_temp_initial_layer" : [
"60"
],
"overhang_fan_threshold": [
"95%"
],
"overhang_fan_speed": [
"100"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"filament_flow_ratio": [
"1"
],
"reduce_fan_stop_start_freq": [
"0"
],
"fan_cooling_layer_time": [
"60"
],
"filament_cost": [
"0"
],
"filament_density": [
"0"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"2.85"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_settings_id": [
""
],
"filament_soluble": [
"0"
],
"filament_type": [
"PLA"
],
"filament_vendor": [
"Generic"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"bed_type": [
"Cool Plate"
],
"nozzle_temperature_initial_layer": [
"200"
],
"full_fan_speed_layer": [
"0"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"35"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"8"
],
"filament_start_gcode": [
"; Filament gcode\n"
],
"nozzle_temperature": [
"200"
],
"temperature_vitrification": [
"100"
]
}

85
resources/profiles/MagicMaker/filament/fdm_filament_pa.json Normal file
View file

@ -0,0 +1,85 @@
{
"type": "filament",
"name": "fdm_filament_pa",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"0"
],
"eng_plate_temp" : [
"100"
],
"hot_plate_temp" : [
"100"
],
"textured_plate_temp" : [
"100"
],
"cool_plate_temp_initial_layer" : [
"0"
],
"eng_plate_temp_initial_layer" : [
"100"
],
"hot_plate_temp_initial_layer" : [
"100"
],
"textured_plate_temp_initial_layer" : [
"100"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"4"
],
"filament_max_volumetric_speed": [
"8"
],
"filament_type": [
"PA"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"290"
],
"reduce_fan_stop_start_freq": [
"0"
],
"fan_max_speed": [
"60"
],
"fan_min_speed": [
"0"
],
"overhang_fan_speed": [
"30"
],
"nozzle_temperature": [
"290"
],
"temperature_vitrification": [
"108"
],
"nozzle_temperature_range_low": [
"270"
],
"nozzle_temperature_range_high": [
"300"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"2"
]
}

88
resources/profiles/MagicMaker/filament/fdm_filament_pc.json Normal file
View file

@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_pc",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"0"
],
"eng_plate_temp" : [
"110"
],
"hot_plate_temp" : [
"110"
],
"textured_plate_temp" : [
"110"
],
"cool_plate_temp_initial_layer" : [
"0"
],
"eng_plate_temp_initial_layer" : [
"110"
],
"hot_plate_temp_initial_layer" : [
"110"
],
"textured_plate_temp_initial_layer" : [
"110"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"30"
],
"filament_max_volumetric_speed": [
"23.2"
],
"filament_type": [
"PC"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"270"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"60"
],
"fan_min_speed": [
"10"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"60"
],
"nozzle_temperature": [
"280"
],
"temperature_vitrification": [
"140"
],
"nozzle_temperature_range_low": [
"260"
],
"nozzle_temperature_range_high": [
"280"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"2"
]
}

88
resources/profiles/MagicMaker/filament/fdm_filament_peek.json Normal file
View file

@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_peek",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"105"
],
"eng_plate_temp" : [
"105"
],
"hot_plate_temp" : [
"105"
],
"textured_plate_temp" : [
"105"
],
"cool_plate_temp_initial_layer" : [
"105"
],
"eng_plate_temp_initial_layer" : [
"105"
],
"hot_plate_temp_initial_layer" : [
"105"
],
"textured_plate_temp_initial_layer" : [
"105"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"35"
],
"filament_max_volumetric_speed": [
"28.6"
],
"filament_type": [
"PEEK"
],
"filament_density": [
"1.04"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"260"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"10"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"nozzle_temperature": [
"260"
],
"temperature_vitrification": [
"110"
],
"nozzle_temperature_range_low": [
"240"
],
"nozzle_temperature_range_high": [
"270"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"3"
]
}

82
resources/profiles/MagicMaker/filament/fdm_filament_pet.json Normal file
View file

@ -0,0 +1,82 @@
{
"type": "filament",
"name": "fdm_filament_pet",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"85"
],
"eng_plate_temp" : [
"85"
],
"hot_plate_temp" : [
"85"
],
"textured_plate_temp" : [
"85"
],
"cool_plate_temp_initial_layer" : [
"85"
],
"eng_plate_temp_initial_layer" : [
"85"
],
"hot_plate_temp_initial_layer" : [
"85"
],
"textured_plate_temp_initial_layer" : [
"85"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"fan_cooling_layer_time": [
"15"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_type": [
"PETG"
],
"filament_density": [
"1.27"
],
"filament_cost": [
"30"
],
"nozzle_temperature_initial_layer": [
"240"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_max_speed": [
"40"
],
"fan_min_speed": [
"20"
],
"overhang_fan_speed": [
"50"
],
"nozzle_temperature": [
"235"
],
"temperature_vitrification": [
"80"
],
"nozzle_temperature_range_low": [
"235"
],
"nozzle_temperature_range_high": [
"240"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

91
resources/profiles/MagicMaker/filament/fdm_filament_pla.json Normal file
View file

@ -0,0 +1,91 @@
{
"type": "filament",
"name": "fdm_filament_pla",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"fan_cooling_layer_time": [
"100"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_type": [
"PLA"
],
"filament_density": [
"1.24"
],
"filament_cost": [
"20"
],
"cool_plate_temp" : [
"60"
],
"eng_plate_temp" : [
"60"
],
"hot_plate_temp" : [
"60"
],
"textured_plate_temp" : [
"60"
],
"cool_plate_temp_initial_layer" : [
"55"
],
"eng_plate_temp_initial_layer" : [
"55"
],
"hot_plate_temp_initial_layer" : [
"55"
],
"textured_plate_temp_initial_layer" : [
"55"
],
"nozzle_temperature_initial_layer": [
"205"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"close_fan_the_first_x_layers": [
"1"
],
"nozzle_temperature": [
"210"
],
"temperature_vitrification": [
"60"
],
"nozzle_temperature_range_low": [
"190"
],
"nozzle_temperature_range_high": [
"210"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"4"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

100
resources/profiles/MagicMaker/filament/fdm_filament_pva.json Normal file
View file

@ -0,0 +1,100 @@
{
"type": "filament",
"name": "fdm_filament_pva",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"35"
],
"eng_plate_temp" : [
"0"
],
"hot_plate_temp" : [
"45"
],
"textured_plate_temp" : [
"45"
],
"cool_plate_temp_initial_layer" : [
"35"
],
"eng_plate_temp_initial_layer" : [
"0"
],
"hot_plate_temp_initial_layer" : [
"45"
],
"textured_plate_temp_initial_layer" : [
"45"
],
"fan_cooling_layer_time": [
"100"
],
"filament_max_volumetric_speed": [
"15"
],
"filament_soluble": [
"1"
],
"filament_is_support": [
"1"
],
"filament_type": [
"PVA"
],
"filament_density": [
"1.24"
],
"filament_cost": [
"20"
],
"nozzle_temperature_initial_layer": [
"220"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"close_fan_the_first_x_layers": [
"1"
],
"nozzle_temperature": [
"220"
],
"temperature_vitrification": [
"50"
],
"nozzle_temperature_range_low": [
"190"
],
"nozzle_temperature_range_high": [
"250"
],
"slow_down_min_speed": [
"10"
],
"slow_down_layer_time": [
"4"
],
"additional_cooling_fan_speed": [
"70"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

88
resources/profiles/MagicMaker/filament/fdm_filament_tpu.json Normal file
View file

@ -0,0 +1,88 @@
{
"type": "filament",
"name": "fdm_filament_tpu",
"from": "system",
"instantiation": "false",
"inherits": "fdm_filament_common",
"cool_plate_temp" : [
"30"
],
"eng_plate_temp" : [
"30"
],
"hot_plate_temp" : [
"35"
],
"textured_plate_temp" : [
"35"
],
"cool_plate_temp_initial_layer" : [
"30"
],
"eng_plate_temp_initial_layer" : [
"30"
],
"hot_plate_temp_initial_layer" : [
"35"
],
"textured_plate_temp_initial_layer" : [
"35"
],
"fan_cooling_layer_time": [
"100"
],
"filament_max_volumetric_speed": [
"15"
],
"filament_type": [
"TPU"
],
"filament_density": [
"1.24"
],
"filament_cost": [
"20"
],
"filament_retraction_length": [
"0.4"
],
"nozzle_temperature_initial_layer": [
"240"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"overhang_fan_speed": [
"100"
],
"additional_cooling_fan_speed": [
"70"
],
"close_fan_the_first_x_layers": [
"1"
],
"nozzle_temperature": [
"240"
],
"temperature_vitrification": [
"60"
],
"nozzle_temperature_range_low": [
"200"
],
"nozzle_temperature_range_high": [
"250"
],
"filament_start_gcode": [
"; filament start gcode\n"
]
}

136
resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json Normal file
View file

@ -0,0 +1,136 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "MM BoneKing 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "MM BoneKing",
"default_print_profile": "0.10mm Fine @MM BoneKing",
"nozzle_diameter": [
"0.4"
],
"gcode_flavor": "klipper",
"machine_pause_gcode": "PAUSE",
"printable_height": "300",
"auxiliary_fan": "0",
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"max_layer_height": [
"0.3"
],
"printer_settings_id": "MM",
"retract_before_wipe": [
"70%"
],
"wipe_distance": [
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"scan_first_layer": "0",
"cooling_tube_length": "20",
"cooling_tube_retraction": "60",
"extruder_clearance_height_to_lid": "100",
"extruder_clearance_height_to_rod": "32",
"extruder_clearance_radius": "50",
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END",
"machine_max_speed_e": [
"60",
"120"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
"min_layer_height": [
"0.05"
],
"nozzle_type": "brass",
"parking_pos_retraction": "22",
"retract_length_toolchange": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"20"
],
"machine_max_jerk_y": [
"9",
"20"
],
"deretraction_speed": [
"30"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"30"
],
"z_hop_types": [
"Spiral Lift"
],
"default_filament_profile": [
"MM Generic PLA"
],
"is_custom_defined": "0",
"machine_max_acceleration_e": [
"10000"
],
"machine_max_acceleration_extruding": [
"10000",
"1500"
],
"machine_max_acceleration_retracting": [
"10000",
"1500"
],
"machine_max_acceleration_x": [
"100000",
"3000"
],
"machine_max_acceleration_y": [
"100000",
"3000"
],
"machine_max_jerk_z": [
"0.5",
"0.4"
],
"machine_max_speed_z": [
"10",
"12"
],
"printable_area": [
"0x0",
"310x0",
"310x310",
"0x310"
],
"thumbnails": [
"310x310"
],
"z_hop": [
"0.2"
],
"version": "2.0.0.0"
}

12
resources/profiles/MagicMaker/machine/MM BoneKing.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "MM BoneKing",
"model_id": "MM-BoneKing",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "magicmaker",
"bed_model": "310_buildplate_model.stl",
"bed_texture": "MM_buildplate_texture.png",
"hotend_model": "MM_hotend.stl",
"default_materials": "MM Generic PLA;MM Generic PETG;MM Generic ABS;MM Generic TPU;MM Generic PC;MM Generic PA;MM Generic PEEK"
}

138
resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json Normal file
View file

@ -0,0 +1,138 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "MM hj SK 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "MM hj SK",
"default_print_profile": "0.10mm Fine @MM hj SK",
"nozzle_diameter": [
"0.4"
],
"gcode_flavor": "klipper",
"is_custom_defined": "0",
"machine_pause_gcode": "PAUSE",
"printable_area": [
"0x0",
"220x0",
"220x210",
"0x210"
],
"printable_height": "300",
"auxiliary_fan": "0",
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_z": [
"12",
"12"
],
"max_layer_height": [
"0.3"
],
"printer_settings_id": "MM",
"retract_before_wipe": [
"70%"
],
"wipe_distance": [
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"scan_first_layer": "0",
"cooling_tube_length": "20",
"cooling_tube_retraction": "60",
"extruder_clearance_height_to_lid": "100",
"extruder_clearance_height_to_rod": "32",
"extruder_clearance_radius": "50",
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END",
"machine_max_acceleration_e": [
"6000"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
"min_layer_height": [
"0.05"
],
"nozzle_type": "brass",
"parking_pos_retraction": "22",
"retract_length_toolchange": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"20"
],
"machine_max_jerk_y": [
"9",
"20"
],
"thumbnails": [
"220x220"
],
"deretraction_speed": [
"30"
],
"machine_max_acceleration_extruding": [
"5000",
"1500"
],
"machine_max_acceleration_retracting": [
"5000",
"1500"
],
"machine_max_acceleration_x": [
"20000",
"3000"
],
"machine_max_acceleration_y": [
"20000",
"3000"
],
"machine_max_jerk_z": [
"2",
"0.4"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"30"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Spiral Lift"
],
"default_filament_profile": [
"MM Generic PLA"
],
"version": "2.0.0.0"
}

12
resources/profiles/MagicMaker/machine/MM hj SK.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "MM hj SK",
"model_id": "MM-hj-SK",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "magicmaker",
"bed_model": "220210_buildplate_model.stl",
"bed_texture": "MM_buildplate_texture.png",
"hotend_model": "MM_hotend.stl",
"default_materials": "MM Generic PLA;MM Generic PETG;MM Generic ABS;MM Generic TPU"
}

137
resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json Normal file
View file

@ -0,0 +1,137 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "MM hqs SF 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "MM hqs SF",
"default_print_profile": "0.10mm Fine @MM hqs SF",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x210",
"0x210"
],
"printable_height": "300",
"auxiliary_fan": "0",
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_z": [
"12",
"12"
],
"max_layer_height": [
"0.3"
],
"printer_settings_id": "MM",
"retract_before_wipe": [
"70%"
],
"wipe_distance": [
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"scan_first_layer": "0",
"cooling_tube_length": "20",
"cooling_tube_retraction": "60",
"extruder_clearance_height_to_lid": "100",
"extruder_clearance_height_to_rod": "32",
"extruder_clearance_radius": "50",
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END",
"machine_max_acceleration_e": [
"6000"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
"min_layer_height": [
"0.05"
],
"nozzle_type": "brass",
"parking_pos_retraction": "22",
"retract_length_toolchange": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"20"
],
"machine_max_jerk_y": [
"9",
"20"
],
"thumbnails": [
"220x220"
],
"deretraction_speed": [
"30"
],
"is_custom_defined": "0",
"machine_max_acceleration_extruding": [
"5000",
"1500"
],
"machine_max_acceleration_retracting": [
"5000",
"1500"
],
"machine_max_acceleration_x": [
"20000",
"3000"
],
"machine_max_acceleration_y": [
"20000",
"3000"
],
"machine_max_jerk_z": [
"2",
"0.4"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"30"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Spiral Lift"
],
"default_filament_profile": [
"MM Generic PLA"
],
"version": "2.0.0.0"
}

12
resources/profiles/MagicMaker/machine/MM hqs SF.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "MM hqs SF",
"model_id": "MM-hqs-SF",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "magicmaker",
"bed_model": "220210_buildplate_model.stl",
"bed_texture": "MM_buildplate_texture.png",
"hotend_model": "MM_hotend.stl",
"default_materials": "MM Generic PLA;MM Generic PETG;MM Generic ABS;MM Generic TPU"
}

129
resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json Normal file
View file

@ -0,0 +1,129 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "MM hqs hj 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "MM hqs hj",
"default_print_profile": "0.10mm Fine @MM hqs hj",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x210",
"0x210"
],
"printable_height": "300",
"auxiliary_fan": "0",
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_z": [
"12",
"12"
],
"max_layer_height": [
"0.3"
],
"printer_settings_id": "MM",
"retract_before_wipe": [
"70%"
],
"wipe_distance": [
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"scan_first_layer": "0",
"cooling_tube_length": "20",
"cooling_tube_retraction": "60",
"deretraction_speed": [
"25"
],
"extruder_clearance_height_to_lid": "100",
"extruder_clearance_height_to_rod": "32",
"extruder_clearance_radius": "50",
"is_custom_defined": "0",
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END",
"machine_max_acceleration_e": [
"6000"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_max_speed_x": [
"300",
"500"
],
"machine_max_speed_y": [
"300",
"500"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...",
"min_layer_height": [
"0.05"
],
"nozzle_type": "brass",
"parking_pos_retraction": "22",
"retract_length_toolchange": [
"5"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"25"
],
"machine_max_acceleration_extruding": [
"2000",
"1500"
],
"machine_max_acceleration_retracting": [
"2000",
"1500"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"20"
],
"machine_max_jerk_y": [
"9",
"20"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"thumbnails": [
"220x220"
],
"default_filament_profile": [
"MM Generic PLA"
],
"version": "2.0.0.0"
}

12
resources/profiles/MagicMaker/machine/MM hqs hj.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "MM hqs hj",
"model_id": "MM-hqs-hj",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "magicmaker",
"bed_model": "220210_buildplate_model.stl",
"bed_texture": "MM_buildplate_texture.png",
"hotend_model": "MM_hotend.stl",
"default_materials": "MM Generic PLA;MM Generic PETG;MM Generic ABS;MM Generic TPU"
}

129
resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json Normal file
View file

@ -0,0 +1,129 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "MM slb 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "MM slb",
"default_print_profile": "0.10mm Fine @MM slb",
"nozzle_diameter": [
"0.4"
],
"auxiliary_fan": "0",
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_z": [
"12",
"12"
],
"max_layer_height": [
"0.3"
],
"printer_settings_id": "MM",
"retract_before_wipe": [
"70%"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"scan_first_layer": "0",
"cooling_tube_length": "20",
"cooling_tube_retraction": "60",
"deretraction_speed": [
"25"
],
"extruder_clearance_height_to_lid": "100",
"extruder_clearance_height_to_rod": "32",
"extruder_clearance_radius": "50",
"machine_max_jerk_e": [
"5",
"2.5"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_pause_gcode": "M601",
"nozzle_type": "brass",
"parking_pos_retraction": "22",
"retract_length_toolchange": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"25"
],
"default_filament_profile": [
"MM Generic PLA"
],
"is_custom_defined": "0",
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0\nG0 Y120\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nPRINT_END",
"machine_max_acceleration_e": [
"4000"
],
"machine_max_acceleration_extruding": [
"2000",
"1500"
],
"machine_max_acceleration_retracting": [
"2000",
"1500"
],
"machine_max_acceleration_x": [
"2000",
"3000"
],
"machine_max_acceleration_y": [
"2000",
"3000"
],
"machine_max_jerk_x": [
"9",
"20"
],
"machine_max_jerk_y": [
"9",
"20"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_x": [
"200",
"500"
],
"machine_max_speed_y": [
"200",
"500"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG0 Z1\nG0 X0 Y0\nG92 E0\nG0 Z0.5\nG1 F1000 Y100 E20\nG92 E0\nM117 Printing...",
"min_layer_height": [
"0.1"
],
"printable_area": [
"0x0",
"125x0",
"125x125",
"0x125"
],
"printable_height": "160",
"retraction_length": [
"2"
],
"thumbnails": [
"120x120"
],
"wipe_distance": [
"1"
],
"version": "2.0.0.0"
}

12
resources/profiles/MagicMaker/machine/MM slb.json Normal file
View file

@ -0,0 +1,12 @@
{
"type": "machine_model",
"name": "MM slb",
"model_id": "MM-slb",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "magicmaker",
"bed_model": "125_buildplate_model.stl",
"bed_texture": "MM_buildplate_texture.png",
"hotend_model": "MM_hotend.stl",
"default_materials": "MM Generic PLA;MM Generic PETG;MM Generic ABS;MM Generic TPU"
}

118
resources/profiles/MagicMaker/machine/fdm_machine_common.json Normal file
View file

@ -0,0 +1,118 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"10000"
],
"machine_max_acceleration_extruding": [
"1500"
],
"machine_max_acceleration_retracting": [
"1500"
],
"machine_max_acceleration_x": [
"3000"
],
"machine_max_acceleration_y": [
"3000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_e": [
"120"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"12"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_height": "212",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"10"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"50"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"default_print_profile": "0.10mm Fine @MM hj",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "",
"machine_end_gcode": ""
}

BIN
resources/profiles/MagicMaker/magicmaker_hotend.stl Normal file
View file

Binary file not shown.

117
resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json Normal file
View file

@ -0,0 +1,117 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine @MM BoneKing",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"initial_layer_acceleration": "500",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"gap_infill_speed": "100",
"initial_layer_infill_speed": "30",
"initial_layer_speed": "15",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "90",
"layer_height": "0.1",
"line_width": "0.4",
"outer_wall_speed": "45",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"sparse_infill_speed": "90",
"support_bottom_z_distance": "0.1",
"support_interface_speed": "90",
"support_speed": "80",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"top_surface_speed": "60",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "2000",
"default_acceleration": "3000",
"initial_layer_print_height": "0.2",
"inner_wall_acceleration": "2000",
"internal_solid_infill_acceleration": "3000",
"is_custom_defined": "0",
"outer_wall_acceleration": "1600",
"sparse_infill_acceleration": "3000",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"compatible_printers": [
"MM BoneKing 0.4 nozzle"
]
}

117
resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json Normal file
View file

@ -0,0 +1,117 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine @MM hj SK",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"initial_layer_acceleration": "500",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"gap_infill_speed": "100",
"initial_layer_infill_speed": "30",
"initial_layer_speed": "15",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "90",
"layer_height": "0.1",
"line_width": "0.4",
"outer_wall_speed": "45",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"sparse_infill_speed": "90",
"support_bottom_z_distance": "0.1",
"support_interface_speed": "90",
"support_speed": "80",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"top_surface_speed": "60",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "2000",
"default_acceleration": "3000",
"initial_layer_print_height": "0.2",
"inner_wall_acceleration": "2000",
"internal_solid_infill_acceleration": "3000",
"is_custom_defined": "0",
"outer_wall_acceleration": "1600",
"sparse_infill_acceleration": "3000",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"compatible_printers": [
"MM hj SK 0.4 nozzle"
]
}

117
resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json Normal file
View file

@ -0,0 +1,117 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine @MM hqs SF",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"initial_layer_acceleration": "500",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"gap_infill_speed": "100",
"initial_layer_infill_speed": "30",
"initial_layer_speed": "15",
"inner_wall_speed": "60",
"internal_solid_infill_speed": "90",
"layer_height": "0.1",
"line_width": "0.4",
"outer_wall_speed": "45",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"sparse_infill_speed": "90",
"support_bottom_z_distance": "0.1",
"support_interface_speed": "90",
"support_speed": "80",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"top_surface_speed": "60",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "2000",
"default_acceleration": "3000",
"initial_layer_print_height": "0.2",
"inner_wall_acceleration": "2000",
"internal_solid_infill_acceleration": "3000",
"is_custom_defined": "0",
"outer_wall_acceleration": "1600",
"sparse_infill_acceleration": "3000",
"top_surface_acceleration": "2000",
"travel_acceleration": "3000",
"compatible_printers": [
"MM hqs SF 0.4 nozzle"
]
}

117
resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json Normal file
View file

@ -0,0 +1,117 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine @MM hqs hj",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"initial_layer_print_height": "0.3",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"travel_speed": "150",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"bridge_acceleration": "1000",
"default_acceleration": "1600",
"enable_support": "1",
"gap_infill_speed": "100",
"initial_layer_infill_speed": "30",
"initial_layer_speed": "15",
"inner_wall_acceleration": "1200",
"initial_layer_acceleration": "500",
"inner_wall_speed": "60",
"internal_solid_infill_acceleration": "1600",
"internal_solid_infill_speed": "90",
"is_custom_defined": "0",
"layer_height": "0.1",
"line_width": "0.4",
"outer_wall_acceleration": "1000",
"outer_wall_speed": "45",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"sparse_infill_acceleration": "1600",
"sparse_infill_speed": "90",
"support_bottom_z_distance": "0.1",
"support_interface_speed": "90",
"support_speed": "80",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"top_surface_acceleration": "1000",
"top_surface_speed": "60",
"travel_acceleration": "1600",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"compatible_printers": [
"MM hqs hj 0.4 nozzle"
]
}

117
resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json Normal file
View file

@ -0,0 +1,117 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine @MM slb",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"bridge_acceleration": "1000",
"enable_support": "1",
"initial_layer_infill_speed": "30",
"initial_layer_speed": "15",
"layer_height": "0.1",
"line_width": "0.4",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"support_bottom_z_distance": "0.1",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"top_surface_acceleration": "1000",
"default_acceleration": "1200",
"gap_infill_speed": "60",
"initial_layer_print_height": "0.2",
"initial_layer_acceleration": "500",
"inner_wall_acceleration": "1000",
"inner_wall_speed": "45",
"internal_solid_infill_acceleration": "1200",
"internal_solid_infill_speed": "60",
"is_custom_defined": "0",
"outer_wall_acceleration": "800",
"outer_wall_speed": "30",
"sparse_infill_acceleration": "1200",
"sparse_infill_speed": "60",
"support_interface_speed": "60",
"support_speed": "60",
"top_surface_speed": "50",
"travel_acceleration": "1200",
"travel_speed": "120",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"compatible_printers": [
"MM slb 0.4 nozzle"
]
}

118
resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json Normal file
View file

@ -0,0 +1,118 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine Fast @MM BoneKing",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"initial_layer_acceleration": "500",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"layer_height": "0.1",
"line_width": "0.4",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"support_bottom_z_distance": "0.1",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "3000",
"default_acceleration": "10000",
"gap_infill_speed": "250",
"initial_layer_infill_speed": "50",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "150",
"inner_wall_acceleration": "5000",
"inner_wall_speed": "200",
"internal_solid_infill_acceleration": "10000",
"internal_solid_infill_speed": "250",
"is_custom_defined": "0",
"outer_wall_acceleration": "5000",
"outer_wall_speed": "150",
"sparse_infill_acceleration": "10000",
"sparse_infill_speed": "250",
"support_interface_speed": "80",
"support_speed": "150",
"top_surface_acceleration": "2000",
"top_surface_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "300",
"compatible_printers": [
"MM BoneKing 0.4 nozzle"
]
}

118
resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json Normal file
View file

@ -0,0 +1,118 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine Fast @MM hj SK",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"initial_layer_acceleration": "500",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"layer_height": "0.1",
"line_width": "0.4",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"support_bottom_z_distance": "0.1",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "3000",
"default_acceleration": "10000",
"gap_infill_speed": "250",
"initial_layer_infill_speed": "50",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "150",
"inner_wall_acceleration": "5000",
"inner_wall_speed": "200",
"internal_solid_infill_acceleration": "10000",
"internal_solid_infill_speed": "250",
"is_custom_defined": "0",
"outer_wall_acceleration": "5000",
"outer_wall_speed": "150",
"sparse_infill_acceleration": "10000",
"sparse_infill_speed": "250",
"support_interface_speed": "80",
"support_speed": "150",
"top_surface_acceleration": "2000",
"top_surface_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "300",
"compatible_printers": [
"MM hj SK 0.4 nozzle"
]
}

118
resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json Normal file
View file

@ -0,0 +1,118 @@
{
"type": "process",
"setting_id": "GP004",
"name": "0.10mm Fine Fast @MM hqs SF",
"from": "system",
"inherits": "fdm_process_common",
"instantiation": "true",
"adaptive_layer_height": "1",
"reduce_crossing_wall": "0",
"max_travel_detour_distance": "0",
"bottom_surface_pattern": "monotonic",
"bottom_shell_layers": "6",
"bottom_shell_thickness": "0",
"bridge_flow": "1",
"bridge_speed": "60",
"brim_width": "0",
"brim_object_gap": "0",
"compatible_printers_condition": "",
"print_sequence": "by layer",
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"infill_direction": "45",
"sparse_infill_density": "15%",
"sparse_infill_pattern": "grid",
"initial_layer_line_width": "0.42",
"infill_combination": "0",
"sparse_infill_line_width": "0.45",
"infill_wall_overlap": "35%",
"interface_shells": "0",
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"initial_layer_acceleration": "500",
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
"detect_overhang_wall": "1",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "20",
"overhang_3_4_speed": "15",
"overhang_4_4_speed": "10",
"inner_wall_line_width": "0.45",
"print_settings_id": "",
"raft_layers": "0",
"seam_position": "aligned",
"skirt_height": "1",
"minimum_sparse_infill_area": "10",
"internal_solid_infill_line_width": "0",
"spiral_mode": "0",
"standby_temperature_delta": "-5",
"resolution": "0.012",
"support_type": "normal(auto)",
"support_style": "grid",
"support_on_build_plate_only": "0",
"support_filament": "0",
"support_line_width": "0.4",
"support_interface_loop_pattern": "0",
"support_interface_filament": "0",
"support_interface_top_layers": "3",
"support_interface_bottom_layers": "-1",
"support_interface_spacing": "0.2",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "0.2",
"support_threshold_angle": "30",
"support_object_xy_distance": "50%",
"tree_support_branch_angle": "40",
"tree_support_wall_count": "0",
"detect_thin_wall": "1",
"top_surface_pattern": "monotonic",
"top_surface_line_width": "0.4",
"top_shell_thickness": "0.8",
"enable_prime_tower": "0",
"wipe_tower_no_sparse_layers": "0",
"prime_tower_width": "60",
"xy_hole_compensation": "0",
"xy_contour_compensation": "0",
"enable_support": "1",
"layer_height": "0.1",
"line_width": "0.4",
"skirt_distance": "1",
"skirt_loops": "1",
"slowdown_for_curled_perimeters": "1",
"support_bottom_z_distance": "0.1",
"support_top_z_distance": "0.1",
"top_shell_layers": "8",
"version": "2.0.0.0",
"wall_loops": "3",
"wipe_on_loops": "1",
"bridge_acceleration": "3000",
"default_acceleration": "10000",
"gap_infill_speed": "250",
"initial_layer_infill_speed": "50",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "30",
"initial_layer_travel_speed": "150",
"inner_wall_acceleration": "5000",
"inner_wall_speed": "200",
"internal_solid_infill_acceleration": "10000",
"internal_solid_infill_speed": "250",
"is_custom_defined": "0",
"outer_wall_acceleration": "5000",
"outer_wall_speed": "150",
"sparse_infill_acceleration": "10000",
"sparse_infill_speed": "250",
"support_interface_speed": "80",
"support_speed": "150",
"top_surface_acceleration": "2000",
"top_surface_speed": "180",
"travel_acceleration": "10000",
"travel_speed": "300",
"compatible_printers": [
"MM hqs SF 0.4 nozzle"
]
}

Some files were not shown because too many files have changed in this diff Show more