3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-08 07:27:41 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3

Handle travel acceleration warning properly for different firmwares

Browse source
This commit is contained in:
SoftFever 2024-03-16 12:04:30 +08:00
parent 56524b6c0a
commit cca218039c
20 changed files with 523 additions and 299 deletions
Download patch file Download diff file Expand all files Collapse all files

29
localization/i18n/OrcaSlicer.pot
View file

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -3834,7 +3834,7 @@ msgstr ""
msgid "Size:"
msgstr ""
#, possible-c-format, possible-boost-format
#, possible-boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6571,8 +6571,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
msgid "Line width"
@ -8024,6 +8024,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -9468,10 +9477,10 @@ msgstr ""
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -12649,8 +12658,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

39
localization/i18n/ca/OrcaSlicer_ca.po
View file

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2024-02-17 22:49+0100\n"
"Last-Translator: \n"
"Language-Team: \n"
@ -4113,7 +4113,7 @@ msgstr "Volum:"
msgid "Size:"
msgstr "Mida:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7105,8 +7105,8 @@ msgstr "Ignorar"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Quan graveu timelapse sense capçal d'impressió, es recomana afegir una "
"\"Torre de Purga Timelapse\" \n"
@ -8727,6 +8727,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10545,15 +10554,15 @@ msgstr "Velocitat màxima del ventilador a la capa"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"La velocitat del ventilador augmentarà linealment de zero a la capa "
"\"close_fan_the_first_x_layers\" al màxim a la capa \"full_fan_speed_layer"
"\". S'ignorarà \"full_fan_speed_layer\" si és inferior a "
"\"close_fan_the_first_x_layers\", en aquest cas el ventilador funcionarà a "
"\"close_fan_the_first_x_layers\" al màxim a la capa "
"\"full_fan_speed_layer\". S'ignorarà \"full_fan_speed_layer\" si és inferior "
"a \"close_fan_the_first_x_layers\", en aquest cas el ventilador funcionarà a "
"la velocitat màxima permesa a la capa \"close_fan_the_first_x_layers\" + 1."
msgid "Support interface fan speed"
@ -14404,8 +14413,8 @@ msgstr ""
"Vols reescriure'l?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
@ -15486,8 +15495,8 @@ msgstr ""
#~ msgstr "Final: "
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "Canviaríem el nom dels perfils seleccionats com a \"Proveïdor Tipus "

33
localization/i18n/cs/OrcaSlicer_cs.po
View file

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2023-09-30 15:15+0200\n"
"Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
"Language-Team: \n"
@ -4045,7 +4045,7 @@ msgstr "Objem:"
msgid "Size:"
msgstr "Velikost:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6972,8 +6972,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat "
"\"Timelapse Wipe Tower\" \n"
@ -8553,6 +8553,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10229,10 +10238,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě "
"\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". "
@ -13912,8 +13921,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
@ -14560,8 +14569,8 @@ msgid ""
msgstr ""
"Plochou na podložku\n"
"Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
"\" nebo stiskněte klávesu <b>F</b>."
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
"podložku\" nebo stiskněte klávesu <b>F</b>."
#: resources/data/hints.ini: [hint:Object List]
msgid ""

66
localization/i18n/de/OrcaSlicer_de.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
"Language-Team: \n"
@ -3461,7 +3461,6 @@ msgstr ""
"Der alternative zusätzliche Wandmodus funktioniert nicht gut, wenn die "
"vertikale Wanddicke auf Alle eingestellt ist."
msgid ""
"Change these settings automatically? \n"
"Yes - Change ensure vertical shell thickness to Moderate and enable "
@ -3736,7 +3735,9 @@ msgid "Edit Custom G-code (%1%)"
msgstr "Benutzerdefinierten G-Code bearbeiten (%1%)"
msgid "Built-in placeholders (Double click item to add to G-code)"
msgstr "Eingebaute Platzhalter (Doppelklicken Sie auf ein Element, um es zum G-Code hinzuzufügen)"
msgstr ""
"Eingebaute Platzhalter (Doppelklicken Sie auf ein Element, um es zum G-Code "
"hinzuzufügen)"
msgid "Search gcode placeholders"
msgstr "G-Code-Platzhalter suchen"
@ -4160,7 +4161,7 @@ msgstr "Volumen:"
msgid "Size:"
msgstr "Größe:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6837,8 +6838,8 @@ msgstr ""
msgid ""
"Timelapse is not supported because Print sequence is set to \"By object\"."
msgstr ""
"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach Objekt"
"\" eingestellt ist."
"Zeitraffer wird nicht unterstützt, da die Druckreihenfolge auf \"Nach "
"Objekt\" eingestellt ist."
msgid "Errors"
msgstr "Fehler"
@ -7186,13 +7187,13 @@ msgstr "Ignorieren"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
"\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
"\"Timelapse Wischturm\" wählen."
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
">\"Timelapse Wischturm\" wählen."
msgid "Line width"
msgstr "Breite der Linie"
@ -8835,6 +8836,15 @@ msgstr ""
"Konfiguration Ihres Druckers anpassen, um höhere Geschwindigkeiten zu "
"erreichen."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -8845,8 +8855,8 @@ msgid ""
msgstr ""
"Die Geschwindigkeitseinstellung überschreitet die maximale Geschwindigkeit "
"des Druckers (machine_max_speed_x/machine_max_speed_y).\n"
"Orca wird automatisch die Druckgeschwindigkeit begrenzen, um sicherzustellen, "
"dass sie nicht die Fähigkeiten des Druckers überschreitet.\n"
"Orca wird automatisch die Druckgeschwindigkeit begrenzen, um "
"sicherzustellen, dass sie nicht die Fähigkeiten des Druckers überschreitet.\n"
"Sie können die maximale Geschwindigkeitseinstellung in der Konfiguration "
"Ihres Druckers anpassen, um höhere Geschwindigkeiten zu erreichen."
@ -10730,13 +10740,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
"Die Lüftergeschwindigkeit wird linear von Null bei der "
"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
"\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
"wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
"läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
@ -11943,7 +11953,6 @@ msgstr ""
"Wenden Sie Schaltnähte nur auf glatte Umfänge an, bei denen traditionelle "
"Nahtstellen die Nähte an scharfen Ecken nicht effektiv verbergen."
msgid "Conditional angle threshold"
msgstr "Winkel-Schwellenwert"
@ -11978,11 +11987,12 @@ msgstr ""
"mm/s) zu drucken. Es ist auch ratsam, die 'Glättung der Extrusionsrate' zu "
"aktivieren, wenn die eingestellte Geschwindigkeit erheblich von der "
"Geschwindigkeit der äußeren oder inneren Wände abweicht. Wenn die hier "
"angegebene Geschwindigkeit höher ist als die Geschwindigkeit der äußeren oder "
"inneren Wände, wird der Drucker auf die langsamere der beiden Geschwindigkeiten "
"zurückgesetzt. Wenn sie als Prozentsatz angegeben wird (z.B. 80%), wird die "
"Geschwindigkeit auf der Grundlage der jeweiligen Geschwindigkeit der äußeren "
"oder inneren Wand berechnet. Der Standardwert ist auf 100% eingestellt."
"angegebene Geschwindigkeit höher ist als die Geschwindigkeit der äußeren "
"oder inneren Wände, wird der Drucker auf die langsamere der beiden "
"Geschwindigkeiten zurückgesetzt. Wenn sie als Prozentsatz angegeben wird (z."
"B. 80%), wird die Geschwindigkeit auf der Grundlage der jeweiligen "
"Geschwindigkeit der äußeren oder inneren Wand berechnet. Der Standardwert "
"ist auf 100% eingestellt."
msgid "Scarf joint flow ratio"
msgstr "Schaltnaht Flussverhältnis"
@ -14659,8 +14669,8 @@ msgstr ""
"Möchten Sie es überschreiben?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer @Drucker, "
@ -15737,8 +15747,8 @@ msgstr ""
#~ msgstr "Keine dünnen Schichten (EXPERIMENTELL)"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "Wir würden die Voreinstellungen als \"Hersteller Typ Seriennummer "

33
localization/i18n/en/OrcaSlicer_en.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -3986,7 +3986,7 @@ msgstr "Volume:"
msgid "Size:"
msgstr "Size:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6860,13 +6860,13 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgid "Line width"
msgstr "Line width"
@ -8400,6 +8400,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -9981,10 +9990,10 @@ msgstr "Full fan speed at layer"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13357,8 +13366,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

45
localization/i18n/es/OrcaSlicer_es.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
"Language-Team: \n"
@ -4136,7 +4136,7 @@ msgstr "Volumen:"
msgid "Size:"
msgstr "Tamaño:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7137,8 +7137,8 @@ msgstr "Ignorar"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Cuando grabamos timelapse sin cabezal de impresión, es recomendable añadir "
"un \"Torre de Purga de Intervalo\" \n"
@ -8781,6 +8781,15 @@ msgstr ""
"impresora. Puede ajustar el valor machine_max_acceleration_extruding en la "
"configuración de la impresora para obtener velocidades superiores."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10676,10 +10685,10 @@ msgstr "Velocidad máxima del ventilador en la capa"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"La velocidad de ventilador se incrementará linealmente de cero a "
"\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". "
@ -13841,12 +13850,12 @@ msgstr ""
"wiki.\n"
"\n"
"Normalmente la calibración es innecesaria. Cuando se inicia una impresión de "
"un solo color/material, con la opción \"Calibración de la dinámica de caudal"
"\" marcada en el menú de inicio de impresión, la impresora seguirá el método "
"antiguo, calibrar el filamento antes de la impresión; Cuando se inicia una "
"impresión de varios colores/materiales, la impresora utilizará el parámetro "
"de compensación por defecto para el filamento durante cada cambio de "
"filamento que tendrá un buen resultado en la mayoría de los casos.\n"
"un solo color/material, con la opción \"Calibración de la dinámica de "
"caudal\" marcada en el menú de inicio de impresión, la impresora seguirá el "
"método antiguo, calibrar el filamento antes de la impresión; Cuando se "
"inicia una impresión de varios colores/materiales, la impresora utilizará el "
"parámetro de compensación por defecto para el filamento durante cada cambio "
"de filamento que tendrá un buen resultado en la mayoría de los casos.\n"
"\n"
"Tenga en cuenta que hay algunos casos en los que el resultado de la "
"calibración no es fiable: el uso de una placa de textura para hacer la "
@ -14618,8 +14627,8 @@ msgstr ""
"¿Quieres reescribirlo?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Cambiaríamos el nombre de los preajustes a \"Número de serie del Vendedor "
@ -15670,8 +15679,8 @@ msgstr ""
#~ msgstr "Capas de baja densidad (EXPERIMENTAL)"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "Cambiaremos el nombre de los perfiles a \"Tipo Número de Serie @impresora "

21
localization/i18n/fr/OrcaSlicer_fr.po
View file

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: Guislain Cyril, Thomas Lété\n"
@ -4144,7 +4144,7 @@ msgstr "Le volume:"
msgid "Size:"
msgstr "Taille:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -8865,6 +8865,15 @@ msgstr ""
"Vous pouvez ajuster la valeur machine_max_acceleration_extruding dans la "
"configuration de votre imprimante pour obtenir des vitesses plus élevées."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -12375,8 +12384,8 @@ msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""
"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « "
"Fermer les trous » pour fermer tous les trous du modèle."
"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez "
"« Fermer les trous » pour fermer tous les trous du modèle."
msgid "Regular"
msgstr "Standard"
@ -13139,8 +13148,8 @@ msgid ""
"Wipe tower is only compatible with relative mode. It is recommended on most "
"printers. Default is checked"
msgstr ""
"L’extrusion relative est recommandée lors de l’utilisation de l’option « "
"label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
"L’extrusion relative est recommandée lors de l’utilisation de l’option "
"« label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
"non verrouillée (mode d’extrusion absolu). La tour d’essuyage n’est "
"compatible qu’avec le mode relatif. Il est recommandé sur la plupart des "
"imprimantes. L’option par défaut est cochée"

29
localization/i18n/hu/OrcaSlicer_hu.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"Language: hu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -4010,7 +4010,7 @@ msgstr "Térfogat:"
msgid "Size:"
msgstr "Méret:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6902,8 +6902,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
"helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
@ -8468,6 +8468,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10054,10 +10063,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13450,8 +13459,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

46
localization/i18n/it/OrcaSlicer_it.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -4125,7 +4125,7 @@ msgstr "Volume:"
msgid "Size:"
msgstr "Dimensione:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7122,8 +7122,8 @@ msgstr "Ignora"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Quando si registra un timelapse senza testa di satmpa, si consiglia di "
"aggiungere un \"Timelapse Torre di pulizia\"\n"
@ -8246,8 +8246,8 @@ msgid ""
msgstr ""
"È stato rilevato un aggiornamento importante che deve essere eseguito prima "
"che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
"\"."
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
"firmware\"."
msgid ""
"The firmware version is abnormal. Repairing and updating are required before "
@ -8766,6 +8766,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10658,16 +10667,17 @@ msgstr "Massima velocità della ventola al layer"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"La velocità della ventola aumenterà linearmente da zero al livello "
"\"close_fan_the_first_x_layers\" al massimo al livello \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" verrà ignorato se inferiore a "
"\"close_fan_the_first_x_layers\", nel qual caso la ventola funzionerà alla "
"massima velocità consentita al livello \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" al massimo al livello "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" verrà ignorato se "
"inferiore a \"close_fan_the_first_x_layers\", nel qual caso la ventola "
"funzionerà alla massima velocità consentita al livello "
"\"close_fan_the_first_x_layers\" + 1."
msgid "Support interface fan speed"
msgstr "Supporta la velocità della ventola dell'interfaccia"
@ -14588,8 +14598,8 @@ msgstr ""
"Vuoi riscriverlo?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Rinomineremo le preimpostazioni come \"Tipo di fornitore seriale @printer "
@ -15668,8 +15678,8 @@ msgstr ""
#~ msgstr "Nessun layer sparso (SPERIMENTALE)"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "Rinomineremo le impostazioni predefinite come \"Tipo di fornitore seriale "

29
localization/i18n/ja/OrcaSlicer_ja.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -3926,7 +3926,7 @@ msgstr "ボリューム"
msgid "Size:"
msgstr "サイズ:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6751,8 +6751,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
"を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
@ -8254,6 +8254,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -9774,10 +9783,10 @@ msgstr "最大回転速度の積層"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13076,8 +13085,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

13
localization/i18n/ko/OrcaSlicer_ko.po
View file

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2024-03-15 23:12+0900\n"
"Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
"github.com>, crwusiz <crwusiz@naver.com>\n"
@ -4018,7 +4018,7 @@ msgstr "용량:"
msgid "Size:"
msgstr "크기:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -8491,6 +8491,15 @@ msgstr ""
"더 빠른 속도를 얻으려면 프린터 구성에서 machine_max_acceleration_extruding 값"
"을 조정할 수 있습니다."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"

29
localization/i18n/nl/OrcaSlicer_nl.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -4039,7 +4039,7 @@ msgstr "Volume:"
msgid "Size:"
msgstr "Maat:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6967,8 +6967,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
"„Timelapse Wipe Tower” toe te voegen \n"
@ -8546,6 +8546,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10147,10 +10156,10 @@ msgstr "Volledige snelheid op laag"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13564,8 +13573,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

59
localization/i18n/pl/OrcaSlicer_pl.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: Krzysztof Morga <tlumaczenieBS@gmail.com>\n"
"Language-Team: \n"
@ -4108,7 +4108,7 @@ msgstr "Objętość:"
msgid "Size:"
msgstr "Rozmiar:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7090,8 +7090,8 @@ msgstr "Ignoruj"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Podczas nagrywania timelapse'a bez głowicy narzędziowej zaleca się dodanie "
"\"Wieżyczki Czyszczącej Timelapse\" \n"
@ -8731,6 +8731,15 @@ msgstr ""
"Możesz dostosować wartość machine_max_acceleration_extruding w konfiguracji "
"swojej drukarki, aby uzyskać wyższe prędkości."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -8931,10 +8940,10 @@ msgid ""
msgstr ""
"Unikaj ruchów nad obrysami-\n"
"Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli "
"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami"
"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować "
"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu "
"bezpośredniego."
"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad "
"obrysami\" zostanie zignorowana dla tej ścieżki. Długość objazdu można "
"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z "
"długości ruchu bezpośredniego."
msgid "mm or %"
msgstr "mm lub %"
@ -9494,9 +9503,9 @@ msgid ""
"quality for needle and small details"
msgstr ""
"Włącz tę opcję, aby zwolnić prędkość druku, aby czas końcowej warstwy nie "
"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości wentylatora"
"\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może to poprawić "
"jakość chłodzenia dla igieł i małych detali"
"był krótszy niż próg czasu warstwy w \"Próg maksymalnej prędkości "
"wentylatora\", tak aby warstwa mogła być chłodzona przez dłuższy czas. Może "
"to poprawić jakość chłodzenia dla igieł i małych detali"
msgid "Normal printing"
msgstr "Normalne drukowanie"
@ -10623,10 +10632,10 @@ msgstr "Pełna prędkość wentylatora na warstwie"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie "
"\"close_fan_the_first_x_layers\" do maksymalnej na warstwie "
@ -12096,8 +12105,8 @@ msgstr ""
"poklatkowy po zakończeniu drukowania. Jeśli wybrany jest tryb \"Wygładź\", "
"głowica narzędziowa przesunie się nad wieżę po wydrukowaniu każdej warstwy, "
"a następnie zrobi zdjęcie. Ponieważ stopiony filament może wyciekać z dyszy "
"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie \"Wygładź"
"\" do czyszczenia dyszy."
"podczas robienia zdjęcia, wieża czyszcząca jest wymagana w trybie "
"\"Wygładź\" do czyszczenia dyszy."
msgid "Traditional"
msgstr "Tradycyjny"
@ -12177,10 +12186,10 @@ msgid ""
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar"
"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć "
"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na "
"rozsądnie niskim poziomie."
"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania "
"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może "
"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej "
"wartości na rozsądnie niskim poziomie."
msgid "Slicing Mode"
msgstr "Tryb cięcia"
@ -14516,8 +14525,8 @@ msgstr ""
"Czy chcesz go zastąpić?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Nazwa profilu zostanie zmieniona na \"Producent Typ Rodzaj @nazwa drukarki, "
@ -16345,8 +16354,8 @@ msgstr ""
#~ "Elevation is too low for object. Use the \"Pad around object\" feature to "
#~ "print the object without elevation."
#~ msgstr ""
#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół modelu"
#~ "\", aby wydrukować model bez podniesienia."
#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół "
#~ "modelu\", aby wydrukować model bez podniesienia."
#~ msgid ""
#~ "The endings of the support pillars will be deployed on the gap between "

51
localization/i18n/ru/OrcaSlicer_ru.po
View file

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: OrcaSlicer V2.0.0-dev Nightly Builds\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2024-02-11 23:36+0700\n"
"Last-Translator: \n"
"Language-Team: \n"
@ -15,8 +15,8 @@ msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"X-Generator: Poedit 3.4.1\n"
msgid "Supports Painting"
@ -4122,7 +4122,7 @@ msgstr "Объём:"
msgid "Size:"
msgstr "Размер:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6943,8 +6943,8 @@ msgid ""
"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
msgstr ""
"Перед использованием устройства Bambu Lab ознакомьтесь с правилами и "
"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu Lab"
"\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu "
"Lab\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
"использования (далее - \"Условия\"). Если вы не соблюдаете или не согласны с "
"Политикой конфиденциальности Bambu Lab, пожалуйста, не пользуйтесь "
"оборудованием и услугами Bambu Lab."
@ -7122,8 +7122,8 @@ msgstr "Игнорировать"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"При записи таймлапса без видимости головы рекомендуется добавить «Черновая "
"башня таймлапса». \n"
@ -8762,6 +8762,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10436,8 +10445,8 @@ msgstr ""
"две ближайшие линии заполнения с коротким отрезком периметра. Если не "
"найдено такого отрезка периметра короче этого параметра, линия заполнения "
"соединяется с отрезком периметра только с одной стороны, а длина отрезка "
"периметра ограничена значением «Длина привязок разреженного "
"заполнения» (infill_anchor), но не больше этого параметра.\n"
"периметра ограничена значением «Длина привязок разреженного заполнения» "
"(infill_anchor), но не больше этого параметра.\n"
"Если установить 0, то будет использоваться старый алгоритм для соединения "
"заполнения, который даёт такой же результат, как и при значениях 1000 и 0."
@ -10588,17 +10597,17 @@ msgstr "Полная скорость вентилятора на слое"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Скорость вентилятора будет нарастать линейно от нуля на слое "
"\"close_fan_the_first_x_layers\" до максимума на слое \"full_fan_speed_layer"
"\". Значение \"full_fan_speed_layer\" будет игнорироваться, если оно меньше "
"значения \"close_fan_the_first_x_layers\", в этом случае вентилятор будет "
"работать на максимально допустимой скорости на слое "
"\"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" до максимума на слое "
"\"full_fan_speed_layer\". Значение \"full_fan_speed_layer\" будет "
"игнорироваться, если оно меньше значения \"close_fan_the_first_x_layers\", в "
"этом случае вентилятор будет работать на максимально допустимой скорости на "
"слое \"close_fan_the_first_x_layers\" + 1."
msgid "Support interface fan speed"
msgstr "Скорость вентилятора на связующем слое"
@ -14487,8 +14496,8 @@ msgstr ""
"Хотите перезаписать его?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n"

35
localization/i18n/sv/OrcaSlicer_sv.po
View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -3999,7 +3999,7 @@ msgstr "Volym:"
msgid "Size:"
msgstr "Storlek:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6880,8 +6880,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
"till ett \"Timelapse Wipe Tower\".\n"
@ -8420,6 +8420,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -9078,9 +9087,9 @@ msgid ""
"quality for needle and small details"
msgstr ""
"Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
"kylnings kvaliteten för små detaljer"
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
"förbättra kylnings kvaliteten för små detaljer"
msgid "Normal printing"
msgstr "Normal utskrift"
@ -9992,10 +10001,10 @@ msgstr "Full fläkthastighet vid lager"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -13376,8 +13385,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

90
localization/i18n/tr/OrcaSlicer_tr.po
View file

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: OrcaSlicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2024-03-14 22:00+0300\n"
"Last-Translator: Olcay ÖREN\n"
"Language-Team: Türkçe\n"
@ -3385,8 +3385,8 @@ msgid ""
"Alternate extra wall does't work well when ensure vertical shell thickness "
"is set to All. "
msgstr ""
"Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak ayarlandığından "
"emin olunduğunda iyi çalışmaz. "
"Alternatif ekstra duvar, dikey kabuk kalınlığının Tümü olarak "
"ayarlandığından emin olunduğunda iyi çalışmaz. "
msgid ""
"Change these settings automatically? \n"
@ -3395,8 +3395,8 @@ msgid ""
"No - Dont use alternate extra wall"
msgstr ""
"Bu ayarlar otomatik olarak değiştirilsin mi? \n"
"Evet - Dikey kabuk kalınlığını Orta olarak değiştirin ve alternatif "
"ekstra duvarı etkinleştirin\n"
"Evet - Dikey kabuk kalınlığını Orta olarak değiştirin ve alternatif ekstra "
"duvarı etkinleştirin\n"
"Hayır - Alternatif ekstra duvar kullanmayın"
msgid ""
@ -4081,7 +4081,7 @@ msgstr "Hacim:"
msgid "Size:"
msgstr "Boyut:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7044,8 +7044,8 @@ msgstr "Atla"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" "
"eklenmesi önerilir.\n"
@ -8465,8 +8465,8 @@ msgid ""
"Please select \"By object\" print sequence to print multiple objects in "
"spiral vase mode."
msgstr ""
"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye göre"
"\" yazdırma sırasını seçin."
"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye "
"göre\" yazdırma sırasını seçin."
msgid ""
"The spiral vase mode does not work when an object contains more than one "
@ -8663,6 +8663,15 @@ msgstr ""
"Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasındaki "
"machine_max_acceleration_extruding değerini ayarlayabilirsiniz."
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -8675,8 +8684,8 @@ msgstr ""
"machine_max_speed_y).\n"
"Orca, yazıcının yeteneklerini aşmadığından emin olmak için yazdırma hızını "
"otomatik olarak sınırlayacaktır.\n"
"Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasındaki maksimum hız "
"ayarını yapabilirsiniz."
"Daha yüksek hızlar elde etmek için yazıcınızın yapılandırmasındaki maksimum "
"hız ayarını yapabilirsiniz."
msgid "Generating skirt & brim"
msgstr "Etek ve kenar oluşturma"
@ -9609,10 +9618,10 @@ msgid ""
"All: Add solid infill for all suitable sloping surfaces\n"
"Default value is All."
msgstr ""
"Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına "
"katı dolgu ekleyin (üst + alt katı katmanlar)\n"
"Yok: Hiçbir yere katı dolgu eklenmez. Dikkat: Modelinizin eğimli "
"yüzeyleri varsa bu seçeneği dikkatli kullanın.\n"
"Dikey kabuk kalınlığını garanti etmek için eğimli yüzeylerin yakınına katı "
"dolgu ekleyin (üst + alt katı katmanlar)\n"
"Yok: Hiçbir yere katı dolgu eklenmez. Dikkat: Modelinizin eğimli yüzeyleri "
"varsa bu seçeneği dikkatli kullanın.\n"
"Yalnızca Kritik: Duvarlar için katı dolgu eklemekten kaçının\n"
"Orta: Yalnızca çok eğimli yüzeyler için katı dolgu ekleyin\n"
"Hepsi: Tüm uygun eğimli yüzeyler için katı dolgu ekleyin\n"
@ -10499,16 +10508,17 @@ msgstr "Maksimum fan hızı"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Fan hızı, \"close_fan_the_first_x_layers\" katmanında sıfırdan "
"\"ful_fan_speed_layer\" katmanında maksimuma doğrusal olarak artırılacaktır. "
"\"full_fan_speed_layer\", \"close_fan_the_first_x_layers\" değerinden "
"düşükse göz ardı edilecektir; bu durumda fan, \"close_fan_the_first_x_layers"
"\" + 1 katmanında izin verilen maksimum hızda çalışacaktır."
"düşükse göz ardı edilecektir; bu durumda fan, "
"\"close_fan_the_first_x_layers\" + 1 katmanında izin verilen maksimum hızda "
"çalışacaktır."
msgid "Support interface fan speed"
msgstr "Destekler için fan hızı"
@ -11696,8 +11706,8 @@ msgid ""
"Apply scarf joints only to smooth perimeters where traditional seams do not "
"conceal the seams at sharp corners effectively."
msgstr ""
"Atkı bağlantılarını yalnızca geleneksel dikişlerin keskin köşelerdeki dikişleri "
"etkili bir şekilde gizleyemediği düzgün kenarlara uygulayın."
"Atkı bağlantılarını yalnızca geleneksel dikişlerin keskin köşelerdeki "
"dikişleri etkili bir şekilde gizleyemediği düzgün kenarlara uygulayın."
msgid "Conditional angle threshold"
msgstr "Koşullu açı eşiği"
@ -11711,8 +11721,8 @@ msgid ""
msgstr ""
"Bu seçenek, koşullu bir atkı eklem dikişi uygulamak için eşik açısını "
"ayarlar.\n"
"Çevre halkası içindeki maksimum açı bu değeri aşarsa "
"(keskin köşelerin bulunmadığını gösterir), bir atkı birleştirme dikişi kullanılacaktır. "
"Çevre halkası içindeki maksimum açı bu değeri aşarsa (keskin köşelerin "
"bulunmadığını gösterir), bir atkı birleştirme dikişi kullanılacaktır. "
"Varsayılan değer 155°'dir."
msgid "Scarf joint speed"
@ -11728,14 +11738,14 @@ msgid ""
"percentage (e.g., 80%), the speed is calculated based on the respective "
"outer or inner wall speed. The default value is set to 100%."
msgstr ""
"Bu seçenek, atkı bağlantılarının yazdırma hızını ayarlar. Atkı bağlantılarının "
"yavaş bir hızda (100 mm/s'den az) yazdırılması tavsiye edilir. Ayarlanan hızın "
"dış veya iç duvarların hızından önemli ölçüde farklı olması durumunda "
"'Ekstrüzyon hızı yumuşatma' seçeneğinin etkinleştirilmesi de tavsiye edilir. "
"Burada belirtilen hız, dış veya iç duvarların hızından daha yüksekse, yazıcı "
"varsayılan olarak iki hızdan daha yavaş olanı seçecektir. Yüzde olarak "
"belirtildiğinde (örn. %80), hız, ilgili dış veya iç duvar hızına "
"göre hesaplanır. Varsayılan değer %100 olarak ayarlanmıştır."
"Bu seçenek, atkı bağlantılarının yazdırma hızını ayarlar. Atkı "
"bağlantılarının yavaş bir hızda (100 mm/s'den az) yazdırılması tavsiye "
"edilir. Ayarlanan hızın dış veya iç duvarların hızından önemli ölçüde farklı "
"olması durumunda 'Ekstrüzyon hızı yumuşatma' seçeneğinin etkinleştirilmesi "
"de tavsiye edilir. Burada belirtilen hız, dış veya iç duvarların hızından "
"daha yüksekse, yazıcı varsayılan olarak iki hızdan daha yavaş olanı "
"seçecektir. Yüzde olarak belirtildiğinde (örn. %80), hız, ilgili dış veya iç "
"duvar hızına göre hesaplanır. Varsayılan değer %100 olarak ayarlanmıştır."
msgid "Scarf joint flow ratio"
msgstr "Atkı birleşimi akış oranı"
@ -14348,8 +14358,8 @@ msgstr ""
"Yeniden yazmak ister misin?"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
"Ön ayarları şu şekilde yeniden adlandırırdık: \"Satıcı Türü Seçtiğiniz Seri "
@ -15407,12 +15417,12 @@ msgstr ""
#~ msgstr "Seyrek katman yok (DENEYSEL)"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgid "The Config can not be loaded."

33
localization/i18n/uk/OrcaSlicer_uk.po
View file

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2023-08-10 20:25-0400\n"
"Last-Translator: \n"
"Language-Team: \n"
@ -15,8 +15,8 @@ msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
"X-Generator: Poedit 3.3.2\n"
msgid "Supports Painting"
@ -4029,7 +4029,7 @@ msgstr "Об'єм:"
msgid "Size:"
msgstr "Розмір:"
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6918,8 +6918,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"При записі таймлапсу без інструментальної головки рекомендується додати "
"“Timelapse Wipe Tower” \n"
@ -8471,6 +8471,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10107,10 +10116,10 @@ msgstr "Повна швидкість вентилятора на шарі"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"Швидкість вентилятора лінійно збільшується від нуля на "
"рівні«close_fan_the_first_x_layers» до максимуму на рівні "
@ -13544,8 +13553,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

50
localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
View file

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2023-04-01 13:21+0800\n"
"Last-Translator: SoftFever <softfeverever@gmail.com>\n"
"Language-Team: \n"
@ -3913,7 +3913,7 @@ msgstr "体积："
msgid "Size:"
msgstr "尺寸："
#, c-format, boost-format
#, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -6725,8 +6725,8 @@ msgstr "忽略"
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
"右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
@ -8228,6 +8228,18 @@ msgstr ""
"您可以调整打印机配置中的machine_max_acceleration_extruding值，以获得更高的速"
"度。"
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
"空驶加速度设置超过了打印机的最大空驶加速度（machine_max_acceleration_travel）。\n"
"Orca将自动限制加速度，以确保不超过打印机的速度限制。\n"
"您可以调整打印机配置中的machine_max_acceleration_travel值，以获得更高的速度。"
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -9848,10 +9860,10 @@ msgstr "满速风扇在"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇"
"第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一"
@ -13283,8 +13295,8 @@ msgstr ""
"你想重写预设吗"
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""
@ -14149,6 +14161,20 @@ msgstr ""
"避免翘曲\n"
"您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
#~ msgid ""
#~ "The travel acceleration setting exceeds the printer's maximum "
#~ "acceleration (machine_max_acceleration_travel).\n"
#~ "Orca will automatically cap the acceleration speed to ensure it doesn't "
#~ "surpass the printer's capabilities.\n"
#~ "You can adjust the machine_max_acceleration_travel value in your "
#~ "printer's configuration to get higher speeds."
#~ msgstr ""
#~ "空驶加速度设置超过了打印机的最大空驶加速度"
#~ "（machine_max_acceleration_travel）。\n"
#~ "Orca将自动限制加速度，以确保不超过打印机的速度限制。\n"
#~ "您可以调整打印机配置中的machine_max_acceleration_travel值，以获得更高的速"
#~ "度。"
#~ msgid ""
#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
#~ "thickness (top+bottom solid layers)"
@ -14172,8 +14198,8 @@ msgstr ""
#~ msgstr "无稀疏层（实验）"
#~ msgid ""
#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
#~ "\". \n"
#~ "We would rename the presets as \"Vendor Type Serial @printer you "
#~ "selected\". \n"
#~ "To add preset for more prinetrs, Please go to printer selection"
#~ msgstr ""
#~ "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n"

29
localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
View file

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-03-13 22:09+0800\n"
"POT-Creation-Date: 2024-03-16 12:02+0800\n"
"PO-Revision-Date: 2023-11-06 14:37+0800\n"
"Last-Translator: ablegods <ablegods@gmail.com>\n"
"Language-Team: \n"
@ -4083,7 +4083,7 @@ msgstr "體積："
msgid "Size:"
msgstr "尺寸："
#, fuzzy, c-format, boost-format
#, fuzzy, boost-format
msgid ""
"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
"separate the conflicted objects farther (%s <-> %s)."
@ -7053,8 +7053,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"在錄製無工具頭縮時錄影影片時，建議增加“縮時錄影擦拭塔”\n"
"右鍵單擊列印板的空白位置，選擇“新增標準模型”->“縮時錄影擦拭塔”。"
@ -8630,6 +8630,15 @@ msgid ""
"printer's configuration to get higher speeds."
msgstr ""
msgid ""
"The travel acceleration setting exceeds the printer's maximum travel "
"acceleration (machine_max_acceleration_travel).\n"
"Orca will automatically cap the travel acceleration speed to ensure it "
"doesn't surpass the printer's capabilities.\n"
"You can adjust the machine_max_acceleration_travel value in your printer's "
"configuration to get higher speeds."
msgstr ""
msgid ""
"The speed setting exceeds the printer's maximum speed (machine_max_speed_x/"
"machine_max_speed_y).\n"
@ -10266,10 +10275,10 @@ msgstr "滿速風扇在"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"風扇速度將從“禁用第一層”的零線性上升到“全風扇速度層”的最大。如果低於“禁用風扇"
"第一層”，則“全風扇速度第一層”將被忽略，在這種情況下，風扇將在“禁用風扇第一"
@ -13800,8 +13809,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more printers, Please go to printer selection"
msgstr ""

39
src/libslic3r/Print.cpp
View file

@ -1477,8 +1477,13 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
}
// check acceleration
if (warning_key.empty() && m_default_object_config.default_acceleration > 0) {
auto accel_to_check = {
const auto max_accel = m_config.machine_max_acceleration_extruding.values[0];
if (warning_key.empty() && m_default_object_config.default_acceleration > 0 && max_accel > 0) {
const bool support_travel_acc = (m_config.gcode_flavor == gcfRepetier || m_config.gcode_flavor == gcfMarlinFirmware || m_config.gcode_flavor == gcfRepRapFirmware);
std::initializer_list<const char *> accel_to_check;
if (!support_travel_acc)
accel_to_check = {
"default_acceleration",
"inner_wall_acceleration",
"outer_wall_acceleration",
@ -1489,7 +1494,17 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
"top_surface_acceleration",
"travel_acceleration",
};
const auto max_accel = m_config.machine_max_acceleration_extruding.values[0];
else
accel_to_check = {
"default_acceleration",
"inner_wall_acceleration",
"outer_wall_acceleration",
"bridge_acceleration",
"initial_layer_acceleration",
"sparse_infill_acceleration",
"internal_solid_infill_acceleration",
"top_surface_acceleration",
};
warning_key = check_motion_ability_object_setting(accel_to_check, max_accel);
if (!warning_key.empty()) {
warning->string = L("The acceleration setting exceeds the printer's maximum acceleration "
@ -1499,6 +1514,24 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
"machine_max_acceleration_extruding value in your printer's configuration to get higher speeds.");
warning->opt_key = warning_key;
}
if (support_travel_acc) {
const auto max_travel = m_config.machine_max_acceleration_travel.values[0];
if (max_travel > 0) {
accel_to_check = {
"travel_acceleration",
};
warning_key = check_motion_ability_object_setting(accel_to_check, max_travel);
if (!warning_key.empty()) {
warning->string = L(
"The travel acceleration setting exceeds the printer's maximum travel acceleration "
"(machine_max_acceleration_travel).\nOrca will "
"automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's "
"capabilities.\nYou can adjust the "
"machine_max_acceleration_travel value in your printer's configuration to get higher speeds.");
warning->opt_key = warning_key;
}
}
}
}
// check speed