diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp
index 8a9f3488b8..57f9f1775a 100644
--- a/src/libslic3r/GCodeWriter.cpp
+++ b/src/libslic3r/GCodeWriter.cpp
@@ -652,7 +652,10 @@ std::string GCodeWriter::lift(LiftType lift_type, bool spiral_vase)
     double target_lift = 0;
     {
         //BBS
-        target_lift = this->config.z_hop.get_at(m_extruder->id());
+        double above = this->config.retract_lift_above.get_at(m_extruder->id());
+        double below = this->config.retract_lift_below.get_at(m_extruder->id());
+        if (m_pos.z() >= above && (below == 0 || m_pos.z() <= below))
+            target_lift = this->config.z_hop.get_at(m_extruder->id());
     }
     // BBS
     if (m_lifted == 0 && m_to_lift == 0 && target_lift > 0) {
diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp
index de2f02a32f..6761f5d9f2 100644
--- a/src/libslic3r/Print.cpp
+++ b/src/libslic3r/Print.cpp
@@ -135,6 +135,8 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "retract_restart_extra",
         "retract_restart_extra_toolchange",
         "retraction_speed",
+        "retract_lift_above",
+        "retract_lift_below",
         "slow_down_layer_time",
         "standby_temperature_delta",
         "machine_start_gcode",
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 650d7c61e0..3f09cd54fa 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2431,6 +2431,21 @@ void PrintConfigDef::init_fff_params()
     def->mode = comSimple;
     def->set_default_value(new ConfigOptionFloats { 0.4 });
 
+    def             = this->add("retract_lift_above", coFloats);
+    def->label      = L("Z hop lower boundary");
+    def->tooltip    = L("Z hop will only come into effect when Z is above this value and is below the parameter: \"Z hop upper boundary\"");
+    def->sidetext   = L("mm");
+    def->mode       = comAdvanced;
+    def->set_default_value(new ConfigOptionFloats{0.});
+
+    def             = this->add("retract_lift_below", coFloats);
+    def->label      = L("Z hop upper boundary");
+    def->tooltip    = L("If this value is positive, Z hop will only come into effect when Z is above the parameter: \"Z hop lower boundary\" and is below this value");
+    def->sidetext   = L("mm");
+    def->mode       = comAdvanced;
+    def->set_default_value(new ConfigOptionFloats{0.});
+
+
     def = this->add("z_hop_types", coEnums);
     def->label = L("Z Hop Type");
     def->tooltip = L("");
@@ -3435,7 +3450,7 @@ void PrintConfigDef::init_fff_params()
     // Declare retract values for filament profile, overriding the printer's extruder profile.
     for (const char *opt_key : {
         // floats
-        "retraction_length", "z_hop", "z_hop_types", "retraction_speed", "deretraction_speed", "retract_restart_extra", "retraction_minimum_travel",
+        "retraction_length", "z_hop", "z_hop_types", "retract_lift_above", "retract_lift_below","retraction_speed", "deretraction_speed", "retract_restart_extra", "retraction_minimum_travel",
         // BBS: floats
         "wipe_distance",
         // bools
@@ -3482,7 +3497,7 @@ void PrintConfigDef::init_extruder_option_keys()
     // ConfigOptionFloats, ConfigOptionPercents, ConfigOptionBools, ConfigOptionStrings
     m_extruder_option_keys = {
         "extruder_type", "nozzle_diameter", "min_layer_height", "max_layer_height", "extruder_offset",
-        "retraction_length", "z_hop", "z_hop_types", "retraction_speed", "deretraction_speed",
+        "retraction_length", "z_hop", "z_hop_types", "retraction_speed", "retract_lift_above", "retract_lift_below","deretraction_speed",
         "retract_before_wipe", "retract_restart_extra", "retraction_minimum_travel", "wipe", "wipe_distance",
         "retract_when_changing_layer", "retract_length_toolchange", "retract_restart_extra_toolchange", "extruder_colour",
         "default_filament_profile"
@@ -3491,6 +3506,8 @@ void PrintConfigDef::init_extruder_option_keys()
     m_extruder_retract_keys = {
         "deretraction_speed",
         "retract_before_wipe",
+        "retract_lift_above",
+        "retract_lift_below",
         "retract_restart_extra",
         "retract_when_changing_layer",
         "retraction_length",
diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index 3f1fa4a2a4..dee5c2bf12 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -860,6 +860,8 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionFloats,              retract_restart_extra))
     ((ConfigOptionFloats,              retract_restart_extra_toolchange))
     ((ConfigOptionFloats,              retraction_speed))
+    ((ConfigOptionFloats,              retract_lift_above))
+    ((ConfigOptionFloats,              retract_lift_below))
     ((ConfigOptionString,              machine_start_gcode))
     ((ConfigOptionStrings,             filament_start_gcode))
     ((ConfigOptionBool,                single_extruder_multi_material))
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 9b52351cd5..eba32f616a 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3465,6 +3465,8 @@ void TabPrinter::build_unregular_pages(bool from_initial_build/* = false*/)
             optgroup = page->new_optgroup(L("Retraction"), L"param_retraction");
             optgroup->append_single_option_line("retraction_length", "", extruder_idx);
             optgroup->append_single_option_line("z_hop", "", extruder_idx);
+            optgroup->append_single_option_line("retract_lift_above", "", extruder_idx);
+            optgroup->append_single_option_line("retract_lift_below", "", extruder_idx);
             optgroup->append_single_option_line("z_hop_types", "", extruder_idx);
             optgroup->append_single_option_line("retraction_speed", "", extruder_idx);
             optgroup->append_single_option_line("deretraction_speed", "", extruder_idx);