3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-30 20:21:12 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 5

Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186

Browse source
This commit is contained in:
Alessandro Ranellucci 2012-10-28 19:15:34 +01:00
parent ecd054a57c
commit c57e94c065
1 changed files with 14 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

15
lib/Slic3r/GCode.pm
View file

@ -3,7 +3,7 @@ use Moo;
use List::Util qw(first);
use Slic3r::ExtrusionPath ':roles';
use Slic3r::Geometry qw(scale unscale scaled_epsilon points_coincide PI X Y);
use Slic3r::Geometry qw(scale unscale scaled_epsilon points_coincide PI X Y A B);
has 'multiple_extruders' => (is => 'ro', default => sub {0} );
has 'layer' => (is => 'rw'); # this is not very correct, we should replace it with explicit layer_id and avoid using $self->layer->flow at all here because it's too general
@ -20,6 +20,7 @@ has 'lifted' => (is => 'rw', default => sub {0} );
has 'last_pos' => (is => 'rw', default => sub { Slic3r::Point->new(0,0) } );
has 'last_speed' => (is => 'rw', default => sub {""});
has 'last_fan_speed' => (is => 'rw', default => sub {0});
has 'last_path' => (is => 'rw');
has 'dec' => (is => 'ro', default => sub { 3 } );
# calculate speeds (mm/min)
@ -142,6 +143,16 @@ sub extrude_path {
my $travel = Slic3r::Line->new($self->last_pos, $path->points->[0]);
if ($travel->length >= scale $self->extruder->retract_before_travel) {
if (!$Slic3r::Config->only_retract_when_crossing_perimeters || $path->role != EXTR_ROLE_FILL || !first { $_->encloses_line($travel, scaled_epsilon) } @{$self->layer->slices}) {
if ($self->last_path && $self->last_path->role == &EXTR_ROLE_EXTERNAL_PERIMETER) {
my @lines = $self->last_path->lines;
my $last_line = $lines[-1];
if (points_coincide($last_line->[B], $self->last_pos)) {
my $point = Slic3r::Geometry::point_along_segment(@$last_line, $last_line->length + scale $self->layer->flow->spacing);
bless $point, 'Slic3r::Point';
$point->rotate(PI/4, $last_line->[B]);
$gcode .= $self->G0($point, undef, 0, "move inwards before travel");
}
}
$gcode .= $self->retract(travel_to => $path->points->[0]);
}
}
@ -192,6 +203,8 @@ sub extrude_path {
$self->elapsed_time($self->elapsed_time + $path_time);
}
$self->last_path($path);
return $gcode;
}