3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-12 01:07:57 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

Use SI units consistently.

Browse source
This commit is contained in:
Henrik Brix Andersen 2012-02-18 22:36:13 +01:00
parent de88144649
commit c20fd8a596
4 changed files with 31 additions and 31 deletions
Download patch file Download diff file Expand all files Collapse all files

20
README.markdown
View file

@ -94,7 +94,7 @@ The author is Alessandro Ranellucci (me).
Printer options:
--nozzle-diameter Diameter of nozzle in mm (default: 0.5)
--print-center Coordinates of the point to center the print around
--print-center Coordinates in mm of the point to center the print around
(default: 100,100)
--use-relative-e-distances
Use relative distances for extrusion in GCODE output
@ -114,16 +114,16 @@ The author is Alessandro Ranellucci (me).
Change this to alter the amount of plastic extruded. There should be
very little need to change this value, which is only useful to
compensate for filament packing (default: 1)
--temperature Extrusion temperature, set 0 to disable (default: 200)
--temperature Extrusion temperature in degree Celsius, set 0 to disable (default: 200)
Speed options:
--travel-speed Speed of non-print moves in mm/sec (default: 130)
--perimeter-speed Speed of print moves for perimeters in mm/sec (default: 30)
--travel-speed Speed of non-print moves in mm/s (default: 130)
--perimeter-speed Speed of print moves for perimeters in mm/s (default: 30)
--small-perimeter-speed
Speed of print moves for small perimeters in mm/sec (default: 30)
--infill-speed Speed of print moves in mm/sec (default: 60)
--solid-infill-speed Speed of print moves for solid surfaces in mm/sec (default: 60)
--bridge-speed Speed of bridge print moves in mm/sec (default: 60)
Speed of print moves for small perimeters in mm/s (default: 30)
--infill-speed Speed of print moves in mm/s (default: 60)
--solid-infill-speed Speed of print moves for solid surfaces in mm/s (default: 60)
--bridge-speed Speed of bridge print moves in mm/s (default: 60)
--bottom-layer-speed-ratio
Factor to increase/decrease speeds on bottom
layer by (default: 0.3)
@ -154,12 +154,12 @@ The author is Alessandro Ranellucci (me).
Retraction options:
--retract-length Length of retraction in mm when pausing extrusion
(default: 1)
--retract-speed Speed for retraction in mm/sec (default: 30)
--retract-speed Speed for retraction in mm/s (default: 30)
--retract-restart-extra
Additional amount of filament in mm to push after
compensating retraction (default: 0)
--retract-before-travel
Only retract before travel moves of this length (default: 2)
Only retract before travel moves of this length in mm (default: 2)
--retract-lift Lift Z by the given distance in mm when retracting (default: 0)
Skirt options: