3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-21 05:37:52 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

ENH: add small perimeter speed and threshold

Browse source 
The original param is added by Prusa. Thanks orca for adding threshold.

1. Re add small perimeter speed and threhold.

github: #2221

Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7
This commit is contained in:
SoftFever 2023-10-17 10:19:02 +08:00 • committed by Lane.Wei
parent 0ece8534db
commit bdaba79455
10 changed files with 44 additions and 9 deletions
Download patch file Download diff file Expand all files Collapse all files

24
src/libslic3r/PrintConfig.cpp
View file

@ -1168,6 +1168,28 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60));
def = this->add("small_perimeter_speed", coFloatOrPercent);
def->label = L("Small perimeters");
def->category = L("Speed");
def->tooltip = L("This setting will affect the speed of perimeters having radius <= small perimeter threshold"
"(usually holes). If expressed as percentage (for example: 80%) it will be calculated on"
"the outer wall speed setting above. Set to zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "outer_wall_speed";
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
def = this->add("small_perimeter_threshold", coFloat);
def->label = L("Small perimter threshold");
def->category = L("Speed");
def->tooltip = L("This sets the threshold for small perimeter length. Default threshold is 0mm");
def->sidetext = L("mm");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("wall_sequence", coEnum);
def->label = L("Order of walls");
def->category = L("Quality");
@ -4465,7 +4487,7 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
// BBS
, "support_sharp_tails","support_remove_small_overhangs", "support_with_sheath",
"tree_support_branch_diameter_angle", "tree_support_collision_resolution", "tree_support_with_infill",
"small_perimeter_speed", "max_volumetric_speed", "max_print_speed",
"max_volumetric_speed", "max_print_speed",
"support_closing_radius",
"remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
"support_transition_line_width", "support_transition_speed", "bed_temperature", "bed_temperature_initial_layer",