Add option to set jerk for infills

Signed-off-by: SoftFever <softfeverever@gmail.com>

src/libslic3r/GCode.cpp

@@ -3713,7 +3713,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
             jerk = m_config.inner_wall_jerk.value;
         } else if (m_config.top_surface_jerk.value > 0 && is_top_surface(path.role())) {
             jerk = m_config.top_surface_jerk.value;
-        } else {
+        } else if (m_config.infill_jerk.value > 0 && is_infill(path.role())) {
+            jerk = m_config.infill_jerk.value;
+        }
+        else {
             jerk = m_config.default_jerk.value;
         }
         gcode += m_writer.set_jerk_xy((unsigned int)floor(jerk + 0.5));

src/libslic3r/Preset.cpp

@@ -750,7 +750,7 @@ static std::vector<std::string> s_Preset_print_options {
      "wall_distribution_count", "min_feature_size", "min_bead_width",
      // SoftFever
      "small_perimeter_speed", "small_perimeter_threshold","bridge_angle", "filter_out_gap_fill", "post_process", "travel_acceleration","inner_wall_acceleration",
-     "default_jerk", "outer_wall_jerk", "inner_wall_jerk", "top_surface_jerk", "initial_layer_jerk","travel_jerk",
+     "default_jerk", "outer_wall_jerk", "inner_wall_jerk", "infill_jerk", "top_surface_jerk", "initial_layer_jerk","travel_jerk",
      "top_solid_infill_flow_ratio","bottom_solid_infill_flow_ratio","only_one_wall_first_layer",
      "print_flow_ratio","seam_gap","role_based_wipe_speed","wipe_speed"
 

src/libslic3r/PrintConfig.cpp

@@ -1484,6 +1484,14 @@ void PrintConfigDef::init_fff_params()
     def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(9));
 
+    def = this->add("infill_jerk", coFloat);
+    def->label = L("Infill");
+    def->tooltip = L("Jerk for infill");
+    def->sidetext = L("mm/s");
+    def->min = 1;
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionFloat(9));
+
     def = this->add("initial_layer_jerk", coFloat);
     def->label = L("Initial layer");
     def->tooltip = L("Jerk for initial layer");

src/libslic3r/PrintConfig.hpp

@@ -906,6 +906,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionFloat,              default_jerk))
     ((ConfigOptionFloat,              outer_wall_jerk))
     ((ConfigOptionFloat,              inner_wall_jerk))
+    ((ConfigOptionFloat,              infill_jerk))
     ((ConfigOptionFloat,              top_surface_jerk))
     ((ConfigOptionFloat,              initial_layer_jerk))
     ((ConfigOptionFloat,              travel_jerk))

src/slic3r/GUI/ConfigManipulation.cpp

@@ -548,7 +548,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
 
     bool have_default_jerk = config->opt_float("default_jerk") > 0;
 
-    for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "top_surface_jerk","travel_jerk" })
+    for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "top_surface_jerk","travel_jerk", "infill_jerk"})
         toggle_field(el, have_default_jerk);
 
     bool have_skirt = config->opt_int("skirt_loops") > 0;

src/slic3r/GUI/Plater.cpp

@@ -7913,10 +7913,9 @@ void Plater::calib_pa(bool line_method, bool bowden) {
         auto printer_config = &wxGetApp().preset_bundle->printers.get_edited_preset().config;
         auto filament_config = &wxGetApp().preset_bundle->filaments.get_edited_preset().config;
         filament_config->set_key_value("slow_down_layer_time", new ConfigOptionFloats{ 1.0f });
-        print_config->set_key_value("default_jerk", new ConfigOptionFloat(1.0f));
+        print_config->set_key_value("default_jerk", new ConfigOptionFloat(9.0f));
         print_config->set_key_value("outer_wall_jerk", new ConfigOptionFloat(1.0f));
         print_config->set_key_value("inner_wall_jerk", new ConfigOptionFloat(1.0f));
-        print_config->set_key_value("top_surface_jerk", new ConfigOptionFloat(1.0f));
         model().objects[0]->config.set_key_value("seam_position", new ConfigOptionEnum<SeamPosition>(spRear));
 
         changed_objects({ 0 });

src/slic3r/GUI/Tab.cpp

@@ -1944,6 +1944,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("default_jerk");
         optgroup->append_single_option_line("outer_wall_jerk");
         optgroup->append_single_option_line("inner_wall_jerk");
+        optgroup->append_single_option_line("infill_jerk");
         optgroup->append_single_option_line("top_surface_jerk");
         optgroup->append_single_option_line("initial_layer_jerk");
         optgroup->append_single_option_line("travel_jerk");