3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-11-02 20:51:23 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 4

make sure combine infill test has infill to combine #1023

Browse source
This commit is contained in:
Mike Sheldrake 2013-02-28 00:55:31 -08:00
parent 28467b68e0
commit b36ed0538d
1 changed files with 6 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

9
t/combineinfill.t
View file

@ -19,6 +19,7 @@ use Slic3r::Test;
$config->set('top_solid_layers', 0);
$config->set('infill_every_layers', 6);
$config->set('layer_height', 0.06);
$config->set('perimeters', 1);
my $test = sub {
my ($shift) = @_;
@ -26,14 +27,16 @@ use Slic3r::Test;
my $self = Slic3r::Test::init_print('20mm_cube', config => $config);
$shift /= &Slic3r::SCALING_FACTOR;
my $scale = 4; # make room for fat infill lines with low layer height
# Put a slope on the box's sides by shifting x and y coords by $tilt * (z / boxheight).
# The test here is to put such a slight slope on the walls that it should
# not trigger any extra fill on fill layers that should be empty when
# combine infill is enabled.
$_->[0] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)), for @{$self->objects->[0]->meshes->[0]->vertices};
$_->[1] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)), for @{$self->objects->[0]->meshes->[0]->vertices};
$_->[0] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)) for @{$self->objects->[0]->meshes->[0]->vertices};
$_->[1] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)) for @{$self->objects->[0]->meshes->[0]->vertices};
$_ = [$_->[0]*$scale, $_->[1]*$scale, $_->[2]] for @{$self->objects->[0]->meshes->[0]->vertices};
# copy of Print::export_gcode() up to the point
# after fill surfaces are combined
$self->init_extruders;