Documented perl modules.

lib/Slic3r.pm

@@ -1,3 +1,6 @@
+# This package loads all the non-GUI Slic3r perl packages.
+# In addition, it implements utility functions for file handling and threading.
+
 package Slic3r;
 
 # Copyright holder: Alessandro Ranellucci
@@ -26,10 +29,11 @@ BEGIN {
     $have_threads = 0 if $Moo::VERSION == 1.003000;
 }
 
-warn "Running Slic3r under Perl 5.16 is not supported nor recommended\n"
+warn "Running Slic3r under Perl 5.16 is neither supported nor recommended\n"
     if $^V == v5.16;
 
 use FindBin;
+# Path to the images.
 our $var = sub { decode_path($FindBin::Bin) . "/var/" . $_[0] };
 
 use Moo 1.003001;
@@ -71,13 +75,16 @@ use Encode::Locale 1.05;
 use Encode;
 use Unicode::Normalize;
 
+# Scaling between the float and integer coordinates.
+# Floats are in mm.
 use constant SCALING_FACTOR         => 0.000001;
-use constant RESOLUTION             => 0.0125;
-use constant SCALED_RESOLUTION      => RESOLUTION / SCALING_FACTOR;
+# Resolution to simplify perimeters to. These constants are now used in C++ code only. Better to publish them to Perl from the C++ code.
+# use constant RESOLUTION             => 0.0125;
+# use constant SCALED_RESOLUTION      => RESOLUTION / SCALING_FACTOR;
 use constant LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER => 0.15;
-use constant INFILL_OVERLAP_OVER_SPACING  => 0.3;
+# use constant INFILL_OVERLAP_OVER_SPACING  => 0.3;
 
-# keep track of threads we created
+# Keep track of threads we created. Each thread keeps its own list of threads it spwaned.
 my @my_threads = ();
 my @threads : shared = ();
 my $pause_sema = Thread::Semaphore->new;
@@ -113,6 +120,12 @@ sub spawn_thread {
     return $thread;
 }
 
+# If the threading is enabled, spawn a set of threads.
+# Otherwise run the task on the current thread.
+# Used for 
+#   Slic3r::Print::Object->layers->make_perimeters  : This is a pure C++ function.
+#   Slic3r::Print::Object->layers->make_fill        : This requires a rewrite of Fill.pm to C++.
+#   Slic3r::Print::SupportMaterial::generate_toolpaths
 sub parallelize {
     my %params = @_;
     
@@ -176,7 +189,7 @@ sub thread_cleanup {
         warn "Calling thread_cleanup() from main thread\n";
         return;
     }
-    
+
     # prevent destruction of shared objects
     no warnings 'redefine';
     *Slic3r::BridgeDetector::DESTROY        = sub {};
@@ -195,7 +208,7 @@ sub thread_cleanup {
     *Slic3r::ExtrusionPath::Collection::DESTROY = sub {};
     *Slic3r::ExtrusionSimulator::DESTROY    = sub {};
     *Slic3r::Flow::DESTROY                  = sub {};
-    *Slic3r::Filler::Destroy                = sub {};
+    *Slic3r::Filler::DESTROY                = sub {};
     *Slic3r::GCode::DESTROY                 = sub {};
     *Slic3r::GCode::AvoidCrossingPerimeters::DESTROY = sub {};
     *Slic3r::GCode::OozePrevention::DESTROY = sub {};
@@ -268,6 +281,12 @@ sub resume_all_threads {
     $pause_sema->up;
 }
 
+# Convert a Unicode path to a file system locale.
+# The encoding is (from Encode::Locale POD):
+# Alias       | Windows | Mac OS X     | POSIX
+# locale_fs   | ANSI    | UTF-8        | nl_langinfo
+# where nl_langinfo is en-US.UTF-8 on a modern Linux as well.
+# So this conversion seems to make the most sense on Windows.
 sub encode_path {
     my ($path) = @_;
     
@@ -277,6 +296,7 @@ sub encode_path {
     return $path;
 }
 
+# Convert a path coded by a file system locale to Unicode.
 sub decode_path {
     my ($path) = @_;
     
@@ -292,6 +312,7 @@ sub decode_path {
     return $path;
 }
 
+# Open a file by converting $filename to local file system locales.
 sub open {
     my ($fh, $mode, $filename) = @_;
     return CORE::open $$fh, $mode, encode_path($filename);

lib/Slic3r/Config.pm

@@ -1,3 +1,6 @@
+# Extends C++ class Slic3r::DynamicPrintConfig
+# This perl class does not keep any perl class variables,
+# all the storage is handled by the underlying C++ code.
 package Slic3r::Config;
 use strict;
 use warnings;
@@ -11,6 +14,8 @@ our @Ignore = qw(duplicate_x duplicate_y multiply_x multiply_y support_material_
     rotate scale duplicate_grid start_perimeters_at_concave_points start_perimeters_at_non_overhang
     randomize_start seal_position bed_size print_center g0);
 
+# C++ Slic3r::PrintConfigDef exported as a Perl hash of hashes.
+# The C++ counterpart is a constant singleton.
 our $Options = print_config_def();
 
 # overwrite the hard-coded readonly value (this information is not available in XS)
@@ -24,6 +29,8 @@ $Options->{threads}{readonly} = !$Slic3r::have_threads;
     }
 }
 
+# Fill in the underlying C++ Slic3r::DynamicPrintConfig with the content of the defaults
+# provided by the C++ class Slic3r::FullPrintConfig.
 sub new_from_defaults {
     my $class = shift;
     my (@opt_keys) = @_;
@@ -39,12 +46,16 @@ sub new_from_defaults {
     return $self;
 }
 
+# From command line parameters
 sub new_from_cli {
     my $class = shift;
     my %args = @_;
     
+    # Delete hash keys with undefined value.
     delete $args{$_} for grep !defined $args{$_}, keys %args;
     
+    # Replace the start_gcode, end_gcode ... hash values
+    # with the content of the files they reference.
     for (qw(start end layer toolchange)) {
         my $opt_key = "${_}_gcode";
         if ($args{$opt_key}) {
@@ -57,7 +68,7 @@ sub new_from_cli {
             }
         }
     }
-    
+
     my $self = $class->new;
     foreach my $opt_key (keys %args) {
         my $opt_def = $Options->{$opt_key};
@@ -83,6 +94,8 @@ sub merge {
     return $config;
 }
 
+# Load a flat ini file without a category into the underlying C++ Slic3r::DynamicConfig class,
+# convert legacy configuration names.
 sub load {
     my $class = shift;
     my ($file) = @_;
@@ -91,6 +104,8 @@ sub load {
     return $class->load_ini_hash($ini->{_});
 }
 
+# Deserialize a perl hash into the underlying C++ Slic3r::DynamicConfig class,
+# convert legacy configuration names.
 sub load_ini_hash {
     my $class = shift;
     my ($ini_hash) = @_;
@@ -175,6 +190,8 @@ sub _handle_legacy {
     return ($opt_key, $value);
 }
 
+# Create a hash of hashes from the underlying C++ Slic3r::DynamicPrintConfig.
+# The first hash key is '_' meaning no category.
 sub as_ini {
     my ($self) = @_;
     
@@ -186,6 +203,7 @@ sub as_ini {
     return $ini;
 }
 
+# Save the content of the underlying C++ Slic3r::DynamicPrintConfig as a flat ini file without any category.
 sub save {
     my $self = shift;
     my ($file) = @_;
@@ -343,6 +361,7 @@ sub validate {
 
 # CLASS METHODS:
 
+# Write a "Windows" style ini file with categories enclosed in squre brackets.
 sub write_ini {
     my $class = shift;
     my ($file, $ini) = @_;
@@ -361,6 +380,10 @@ sub write_ini {
     close $fh;
 }
 
+# Parse a "Windows" style ini file with categories enclosed in squre brackets.
+# Returns a hash of hashes over strings.
+# {category}{name}=value
+# Non-categorized entries are stored under a category '_'.
 sub read_ini {
     my $class = shift;
     my ($file) = @_;

lib/Slic3r/GCode/CoolingBuffer.pm

@@ -1,9 +1,13 @@
+# A standalone (no C++ implementation) G-code filter, to control cooling of the print.
+# The G-code is processed per layer. Once a layer is collected, fan start / stop commands are edited
+# and the print is modified to stretch over a minimum layer time.
+
 package Slic3r::GCode::CoolingBuffer;
 use Moo;
 
 has 'config'    => (is => 'ro', required => 1);  # Slic3r::Config::Print
-has 'gcodegen'  => (is => 'ro', required => 1);
-has 'gcode'     => (is => 'rw', default => sub {""});
+has 'gcodegen'  => (is => 'ro', required => 1);  # Slic3r::GCode C++ instance
+has 'gcode'     => (is => 'rw', default => sub {""}); # Cache of a G-code snippet emitted for a single layer.
 has 'elapsed_time' => (is => 'rw', default => sub {0});
 has 'layer_id'  => (is => 'rw');
 has 'last_z'    => (is => 'rw', default => sub { {} });  # obj_id => z (basically a 'last seen' table)
@@ -20,12 +24,15 @@ sub append {
     
     my $return = "";
     if (exists $self->last_z->{$obj_id} && $self->last_z->{$obj_id} != $print_z) {
+        # A layer was finished, Z of the object's layer changed. Process the layer.
         $return = $self->flush;
     }
     
     $self->layer_id($layer_id);
     $self->last_z->{$obj_id} = $print_z;
     $self->gcode($self->gcode . $gcode);
+    #FIXME Vojtech: This is a very rough estimate of the print time, 
+    # not taking into account the acceleration profiles generated by the printer firmware.
     $self->elapsed_time($self->elapsed_time + $self->gcodegen->elapsed_time);
     $self->gcodegen->set_elapsed_time(0);
     
@@ -46,9 +53,12 @@ sub flush {
     if ($self->config->cooling) {
         Slic3r::debugf "Layer %d estimated printing time: %d seconds\n", $self->layer_id, $elapsed;
         if ($elapsed < $self->config->slowdown_below_layer_time) {
+            # Layer time very short. Enable the fan to a full throttle and slow down the print
+            # (stretch the layer print time to slowdown_below_layer_time).
             $fan_speed = $self->config->max_fan_speed;
             $speed_factor = $elapsed / $self->config->slowdown_below_layer_time;
         } elsif ($elapsed < $self->config->fan_below_layer_time) {
+            # Layer time quite short. Enable the fan proportionally according to the current layer time.
             $fan_speed = $self->config->max_fan_speed - ($self->config->max_fan_speed - $self->config->min_fan_speed)
                 * ($elapsed - $self->config->slowdown_below_layer_time)
                 / ($self->config->fan_below_layer_time - $self->config->slowdown_below_layer_time); #/
@@ -56,6 +66,9 @@ sub flush {
         Slic3r::debugf "  fan = %d%%, speed = %d%%\n", $fan_speed, $speed_factor * 100;
         
         if ($speed_factor < 1) {
+            # Adjust feed rate of G1 commands marked with an _EXTRUDE_SET_SPEED
+            # as long as they are not _WIPE moves (they cannot if they are _EXTRUDE_SET_SPEED)
+            # and they are not preceded directly by _BRIDGE_FAN_START (do not adjust bridging speed).
             $gcode =~ s/^(?=.*?;_EXTRUDE_SET_SPEED)(?!.*?;_WIPE)(?<!;_BRIDGE_FAN_START\n)(G1\sF)(\d+(?:\.\d+)?)/
                 my $new_speed = $2 * $speed_factor;
                 $1 . sprintf("%.3f", $new_speed < $self->min_print_speed ? $self->min_print_speed : $new_speed)

lib/Slic3r/GCode/PressureRegulator.pm

@@ -1,3 +1,5 @@
+# A pure perl (no C++ implementation) G-code filter, to control the pressure inside the nozzle.
+
 package Slic3r::GCode::PressureRegulator;
 use Moo;
 

lib/Slic3r/GUI.pm

@@ -95,6 +95,9 @@ sub OnInit {
     $self->{notifier} = Slic3r::GUI::Notifier->new;
     
     # locate or create data directory
+    # Unix: ~/.Slic3r
+    # Windows: "C:\Users\username\AppData\Roaming\Slic3r" or "C:\Documents and Settings\username\Application Data\Slic3r"
+    # Mac: "~/Library/Application Support/Slic3r"
     $datadir ||= Slic3r::decode_path(Wx::StandardPaths::Get->GetUserDataDir);
     my $enc_datadir = Slic3r::encode_path($datadir);
     Slic3r::debugf "Data directory: %s\n", $datadir;

lib/Slic3r/GUI/Plater.pm

@@ -51,6 +51,7 @@ sub new {
     ));
     $self->{model} = Slic3r::Model->new;
     $self->{print} = Slic3r::Print->new;
+    # List of Perl objects Slic3r::GUI::Plater::Object, representing a 2D preview of the platter.
     $self->{objects} = [];
     
     $self->{print}->set_status_cb(sub {
@@ -976,6 +977,8 @@ sub schedule_background_process {
     }
 }
 
+# Executed asynchronously by a timer every PROCESS_DELAY (0.5 second).
+# The timer is started by schedule_background_process(), 
 sub async_apply_config {
     my ($self) = @_;
     
@@ -1848,6 +1851,7 @@ sub OnDropFiles {
     $self->{window}->load_file($_) for @$filenames;
 }
 
+# 2D preview of an object. Each object is previewed by its convex hull.
 package Slic3r::GUI::Plater::Object;
 use Moo;
 

lib/Slic3r/Layer.pm

@@ -1,3 +1,5 @@
+# Extends the C++ class Slic3r::Layer.
+
 package Slic3r::Layer;
 use strict;
 use warnings;

lib/Slic3r/Model.pm

@@ -1,3 +1,4 @@
+# extends C++ class Slic3r::Model
 package Slic3r::Model;
 
 use List::Util qw(first max any);
@@ -99,6 +100,7 @@ sub convert_multipart_object {
     $self->delete_object($_) for reverse 0..($self->objects_count-2);
 }
 
+# Extends C++ class Slic3r::ModelMaterial
 package Slic3r::Model::Material;
 
 sub apply {
@@ -106,6 +108,7 @@ sub apply {
     $self->set_attribute($_, $attributes{$_}) for keys %$attributes;
 }
 
+# Extends C++ class Slic3r::ModelObject
 package Slic3r::Model::Object;
 
 use File::Basename qw(basename);

lib/Slic3r/Print.pm

@@ -1,3 +1,5 @@
+# The slicing work horse.
+# Extends C++ class Slic3r::Print
 package Slic3r::Print;
 use strict;
 use warnings;
@@ -89,6 +91,7 @@ sub export_gcode {
     }
 }
 
+# Export SVG slices for the offline SLA printing.
 sub export_svg {
     my $self = shift;
     my %params = @_;

lib/Slic3r/Print/Object.pm

@@ -1,4 +1,5 @@
 package Slic3r::Print::Object;
+# extends c++ class Slic3r::PrintObject (Print.xsp)
 use strict;
 use warnings;
 
@@ -32,6 +33,14 @@ sub support_layers {
     return [ map $self->get_support_layer($_), 0..($self->support_layer_count - 1) ];
 }
 
+# 1) Decides Z positions of the layers,
+# 2) Initializes layers and their regions
+# 3) Slices the object meshes
+# 4) Slices the modifier meshes and reclassifies the slices of the object meshes by the slices of the modifier meshes
+# 5) Applies size compensation (offsets the slices in XY plane)
+# 6) Replaces bad slices by the slices reconstructed from the upper/lower layer
+# Resulting expolygons of layer regions are marked as Internal.
+#
 # this should be idempotent
 sub slice {
     my $self = shift;
@@ -326,6 +335,7 @@ sub slice {
     $self->set_step_done(STEP_SLICE);
 }
 
+# called from slice()
 sub _slice_region {
     my ($self, $region_id, $z, $modifier) = @_;
 
@@ -1110,6 +1120,9 @@ sub combine_infill {
     }
 }
 
+# Simplify the sliced model, if "resolution" configuration parameter > 0.
+# The simplification is problematic, because it simplifies the slices independent from each other,
+# which makes the simplified discretization visible on the object surface.
 sub _simplify_slices {
     my ($self, $distance) = @_;
     

lib/Slic3r/Print/Simple.pm

@@ -1,3 +1,10 @@
+# A simple wrapper to quickly print a single model without a GUI.
+# Used by the command line slic3r.pl, by command line utilities pdf-slic3s.pl and view-toolpaths.pl,
+# and by the quick slice menu of the Slic3r GUI.
+#
+# It creates and owns an instance of Slic3r::Print  to perform the slicing
+# and it accepts an instance of Slic3r::Model from the outside.
+
 package Slic3r::Print::Simple;
 use Moo;
 
@@ -51,6 +58,7 @@ has 'output_file' => (
 );
 
 sub set_model {
+    # $model is of type Slic3r::Model
     my ($self, $model) = @_;
     
     # make method idempotent so that the object is reusable

lib/Slic3r/Print/State.pm

@@ -1,3 +1,4 @@
+# Wraps C++ enums Slic3r::PrintStep and Slic3r::PrintObjectStep
 package Slic3r::Print::State;
 use strict;
 use warnings;

lib/Slic3r/Test/SectionCut.pm

@@ -1,3 +1,4 @@
+# Slices at the XZ plane, for debugging purposes.
 package Slic3r::Test::SectionCut;
 use Moo;