diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 30d99152e3..45dcdb8df5 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -713,31 +713,31 @@
             "name": "Bambu Support W @base",
             "sub_path": "filament/Bambu Support W @base.json"
         },
-		{
+        {
             "name": "SUNLU PLA Matte @base",
             "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json"
         },
-		{
+        {
             "name": "SUNLU PLA+ @base",
             "sub_path": "filament/SUNLU/SUNLU PLA+ @base.json"
         },
-		{
+        {
             "name": "SUNLU PLA+ 2.0 @base",
             "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @base.json"
         },
-		{
+        {
             "name": "SUNLU Silk PLA+ @base",
             "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @base.json"
         },
         {
-            "name": "SUNLU Marble PLA @base",
+            "name": "SUNLU PLA Marble @base",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @base.json"
         },
-		{
+        {
             "name": "SUNLU Wood PLA @base",
             "sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json"
         },
-		{
+        {
             "name": "SUNLU PETG @base",
             "sub_path": "filament/SUNLU/SUNLU PETG @base.json"
         },
@@ -1478,23 +1478,23 @@
             "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json"
         },
         {
-            "name": "SUNLU Marble PLA @BBL X1C",
+            "name": "SUNLU PLA Marble @BBL X1C",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1C.json"
         },
         {
-            "name": "SUNLU Marble PLA @BBL X1",
+            "name": "SUNLU PLA Marble @BBL X1",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1.json"
         },
         {
-            "name": "SUNLU Marble PLA @BBL P1P",
+            "name": "SUNLU PLA Marble @BBL P1P",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL P1P.json"
         },
         {
-            "name": "SUNLU Marble PLA @BBL A1M",
+            "name": "SUNLU PLA Marble @BBL A1M",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1M.json"
         },
         {
-            "name": "SUNLU Marble PLA @BBL A1",
+            "name": "SUNLU PLA Marble @BBL A1",
             "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1.json"
         },
         {
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json
index 5e4dfa6f87..dbfe4e80e8 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json	
@@ -17,6 +17,12 @@
     "filament_vendor": [
         "SUNLU"
     ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json
index 5a190a7283..7f8dac8a20 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json	
@@ -31,7 +31,7 @@
         "22.99"
     ],
     "filament_density": [
-        "1.23"
+        "1.27"
     ],
     "filament_flow_ratio": [
         "0.95"
@@ -48,14 +48,14 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-	"nozzle_temperature": [
+    "nozzle_temperature": [
         "245"
     ],
     "nozzle_temperature_initial_layer": [
         "250"
     ],
     "nozzle_temperature_range_high": [
-        "270"
+        "280"
     ],
     "nozzle_temperature_range_low": [
         "230"
@@ -75,8 +75,8 @@
     "textured_plate_temp_initial_layer": [
         "60"
     ],
-	"temperature_vitrification": [
-        "64"
+    "temperature_vitrification": [
+        "68"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json
index 9ee67ab7a6..4e8a7cc0c1 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json	
@@ -14,13 +14,13 @@
     "filament_flow_ratio": [
         "0.98"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
         "18"
     ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
         "21"
     ],
     "filament_vendor": [
@@ -38,8 +38,14 @@
     "filament_scarf_length":[
         "10"
     ],
-	"temperature_vitrification": [
-        "53"
+    "temperature_vitrification": [
+        "54"
+    ],
+    "nozzle_temperature_range_high": [
+        "245"
+    ],
+    "nozzle_temperature_range_low": [
+        "205"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json
index 8b1c52eb35..383ee386b4 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
@@ -9,18 +9,18 @@
         "18.99"
     ],
     "filament_density": [
-        "1.23"
+        "1.21"
     ],
     "filament_flow_ratio": [
         "1.0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
         "18"
-    ],	
-	"filament_max_volumetric_speed": [
+    ],    
+    "filament_max_volumetric_speed": [
         "22"
     ],
     "filament_vendor": [
@@ -38,10 +38,10 @@
     "filament_scarf_length":[
         "10"
     ],
-	"temperature_vitrification": [
-        "53"
+    "temperature_vitrification": [
+        "54"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
-}
\ No newline at end of file
+}
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json
index 04ce4d4300..700bc8ace5 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1 0.2 nozzle",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_04",
+    "setting_id": "SNLS03_05",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json
index a5d2a227bb..902029496f 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1M",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_05",
+    "setting_id": "SNLS03_07",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json
index ec96f4bb23..72c9c69ed8 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json	
@@ -14,13 +14,13 @@
     "filament_flow_ratio": [
         "1.0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
         "18"
-    ],	
-	"filament_max_volumetric_speed": [
+    ],    
+    "filament_max_volumetric_speed": [
         "12"
     ],
     "filament_vendor": [
@@ -38,8 +38,8 @@
     "filament_scarf_length":[
         "10"
     ],
-	"temperature_vitrification": [
-        "53"
+    "temperature_vitrification": [
+        "54"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json
index a4e07641fc..8112a2b94f 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json	
@@ -15,13 +15,13 @@
     "filament_flow_ratio": [
         "0.98"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
         "18"
-    ],	
-	"filament_max_volumetric_speed": [
+    ],    
+    "filament_max_volumetric_speed": [
         "16"
     ],
     "filament_vendor": [
@@ -45,8 +45,8 @@
     "supertack_plate_temp_initial_layer": [
         "0"
     ],
-	"temperature_vitrification": [
-        "53"
+    "temperature_vitrification": [
+        "54"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json
index dfd91a5564..225b114c00 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json	
@@ -9,27 +9,27 @@
         "26.99"
     ],
     "filament_density": [
-        "1.25"
+        "1.10"
     ],
     "filament_flow_ratio": [
         "1.0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_long_retractions_when_cut": [
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
+    "filament_retraction_distances_when_cut": [
         "18"
     ],
-	"filament_retraction_length": [
+    "filament_retraction_length": [
         "4"
     ],
-	"filament_retraction_speed": [
+    "filament_retraction_speed": [
         "50"
     ],
-	"filament_deretraction_speed": [
+    "filament_deretraction_speed": [
         "0"
     ],
-	"filament_max_volumetric_speed": [
+    "filament_max_volumetric_speed": [
         "16"
     ],
     "filament_vendor": [
@@ -47,8 +47,14 @@
     "filament_scarf_length":[
         "10"
     ],
-	"temperature_vitrification": [
-        "45"
+    "temperature_vitrification": [
+        "54"
+    ],
+     "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "195"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"