diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index e341c83275..912efe5a8a 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -51,22 +51,90 @@ "name": "fdm_process_single_common", "sub_path": "process/fdm_process_single_common.json" }, + { + "name": "fdm_process_dual_0.06_nozzle_0.2", + "sub_path": "process/fdm_process_dual_0.06_nozzle_0.2.json" + }, + { + "name": "fdm_process_dual_0.08_nozzle_0.2", + "sub_path": "process/fdm_process_dual_0.08_nozzle_0.2.json" + }, + { + "name": "fdm_process_dual_0.08_nozzle_0.4", + "sub_path": "process/fdm_process_dual_0.08_nozzle_0.4.json" + }, { "name": "fdm_process_dual_0.10_nozzle_0.2", "sub_path": "process/fdm_process_dual_0.10_nozzle_0.2.json" }, + { + "name": "fdm_process_dual_0.12_nozzle_0.2", + "sub_path": "process/fdm_process_dual_0.12_nozzle_0.2.json" + }, + { + "name": "fdm_process_dual_0.12_nozzle_0.4", + "sub_path": "process/fdm_process_dual_0.12_nozzle_0.4.json" + }, + { + "name": "fdm_process_dual_0.14_nozzle_0.2", + "sub_path": "process/fdm_process_dual_0.14_nozzle_0.2.json" + }, + { + "name": "fdm_process_dual_0.16_nozzle_0.4", + "sub_path": "process/fdm_process_dual_0.16_nozzle_0.4.json" + }, + { + "name": "fdm_process_dual_0.18_nozzle_0.6", + "sub_path": "process/fdm_process_dual_0.18_nozzle_0.6.json" + }, { "name": "fdm_process_dual_0.20_nozzle_0.4", "sub_path": "process/fdm_process_dual_0.20_nozzle_0.4.json" }, + { + "name": "fdm_process_dual_0.24_nozzle_0.4", + "sub_path": "process/fdm_process_dual_0.24_nozzle_0.4.json" + }, + { + "name": "fdm_process_dual_0.24_nozzle_0.6", + "sub_path": "process/fdm_process_dual_0.24_nozzle_0.6.json" + }, + { + "name": "fdm_process_dual_0.24_nozzle_0.8", + "sub_path": "process/fdm_process_dual_0.24_nozzle_0.8.json" + }, + { + "name": "fdm_process_dual_0.28_nozzle_0.4", + "sub_path": "process/fdm_process_dual_0.28_nozzle_0.4.json" + }, { "name": "fdm_process_dual_0.30_nozzle_0.6", "sub_path": "process/fdm_process_dual_0.30_nozzle_0.6.json" }, + { + "name": "fdm_process_dual_0.32_nozzle_0.8", + "sub_path": "process/fdm_process_dual_0.32_nozzle_0.8.json" + }, + { + "name": "fdm_process_dual_0.36_nozzle_0.6", + "sub_path": "process/fdm_process_dual_0.36_nozzle_0.6.json" + }, { "name": "fdm_process_dual_0.40_nozzle_0.8", "sub_path": "process/fdm_process_dual_0.40_nozzle_0.8.json" }, + { + "name": "fdm_process_dual_0.42_nozzle_0.6", + "sub_path": "process/fdm_process_dual_0.42_nozzle_0.6.json" + }, + { + "name": "fdm_process_dual_0.48_nozzle_0.8", + "sub_path": "process/fdm_process_dual_0.48_nozzle_0.8.json" + }, + { + "name": "fdm_process_dual_0.56_nozzle_0.8", + "sub_path": "process/fdm_process_dual_0.56_nozzle_0.8.json" + }, { "name": "fdm_process_single_0.06_nozzle_0.2", "sub_path": "process/fdm_process_single_0.06_nozzle_0.2.json" @@ -151,22 +219,90 @@ "name": "fdm_process_single_0.56_nozzle_0.8", "sub_path": "process/fdm_process_single_0.56_nozzle_0.8.json" }, + { + "name": "0.06mm Extra Fine @BBL H2D 0.2 nozzle", + "sub_path": "process/0.06mm Extra Fine @BBL H2D 0.2 nozzle.json" + }, + { + "name": "0.08mm Fine @BBL H2D 0.2 nozzle", + "sub_path": "process/0.08mm Fine @BBL H2D 0.2 nozzle.json" + }, + { + "name": "0.08mm Extra Fine @BBL H2D", + "sub_path": "process/0.08mm Extra Fine @BBL H2D.json" + }, { "name": "0.10mm Standard @BBL H2D 0.2 nozzle", "sub_path": "process/0.10mm Standard @BBL H2D 0.2 nozzle.json" }, + { + "name": "0.12mm Draft @BBL H2D 0.2 nozzle", + "sub_path": "process/0.12mm Draft @BBL H2D 0.2 nozzle.json" + }, + { + "name": "0.12mm Fine @BBL H2D", + "sub_path": "process/0.12mm Fine @BBL H2D.json" + }, + { + "name": "0.14mm Extra Draft @BBL H2D 0.2 nozzle", + "sub_path": "process/0.14mm Extra Draft @BBL H2D 0.2 nozzle.json" + }, + { + "name": "0.16mm Optimal @BBL H2D", + "sub_path": "process/0.16mm Optimal @BBL H2D.json" + }, + { + "name": "0.18mm Extra Fine @BBL H2D 0.6 nozzle", + "sub_path": "process/0.18mm Extra Fine @BBL H2D 0.6 nozzle.json" + }, { "name": "0.20mm Standard @BBL H2D", "sub_path": "process/0.20mm Standard @BBL H2D.json" }, + { + "name": "0.24mm Draft @BBL H2D", + "sub_path": "process/0.24mm Draft @BBL H2D.json" + }, + { + "name": "0.24mm Fine @BBL H2D 0.6 nozzle", + "sub_path": "process/0.24mm Fine @BBL H2D 0.6 nozzle.json" + }, + { + "name": "0.24mm Extra Fine @BBL H2D 0.8 nozzle", + "sub_path": "process/0.24mm Extra Fine @BBL H2D 0.8 nozzle.json" + }, + { + "name": "0.28mm Extra Draft @BBL H2D", + "sub_path": "process/0.28mm Extra Draft @BBL H2D.json" + }, { "name": "0.30mm Standard @BBL H2D 0.6 nozzle", "sub_path": "process/0.30mm Standard @BBL H2D 0.6 nozzle.json" }, + { + "name": "0.32mm Fine @BBL H2D 0.8 nozzle", + "sub_path": "process/0.32mm Fine @BBL H2D 0.8 nozzle.json" + }, + { + "name": "0.36mm Draft @BBL H2D 0.6 nozzle", + "sub_path": "process/0.36mm Draft @BBL H2D 0.6 nozzle.json" + }, { "name": "0.40mm Standard @BBL H2D 0.8 nozzle", "sub_path": "process/0.40mm Standard @BBL H2D 0.8 nozzle.json" }, + { + "name": "0.42mm Extra Draft @BBL H2D 0.6 nozzle", + "sub_path": "process/0.42mm Extra Draft @BBL H2D 0.6 nozzle.json" + }, + { + "name": "0.48mm Draft @BBL H2D 0.8 nozzle", + "sub_path": "process/0.48mm Draft @BBL H2D 0.8 nozzle.json" + }, + { + "name": "0.56mm Extra Draft @BBL H2D 0.8 nozzle", + "sub_path": "process/0.56mm Extra Draft @BBL H2D 0.8 nozzle.json" + }, { "name": "0.06mm Fine @BBL A1 0.2 nozzle", "sub_path": "process/0.06mm Fine @BBL A1 0.2 nozzle.json" diff --git a/resources/profiles/BBL/process/0.06mm Extra Fine @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Extra Fine @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..2a3103af7e --- /dev/null +++ b/resources/profiles/BBL/process/0.06mm Extra Fine @BBL H2D 0.2 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "process", + "name": "0.06mm Extra Fine @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP135", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "layer_height": "0.06", + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json new file mode 100644 index 0000000000..c10f8c4bbe --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.08mm Extra Fine @BBL H2D", + "inherits": "fdm_process_dual_0.08_nozzle_0.4", + "from": "system", + "setting_id": "GP136", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.08", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Fine @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Fine @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..9878015bd7 --- /dev/null +++ b/resources/profiles/BBL/process/0.08mm Fine @BBL H2D 0.2 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "process", + "name": "0.08mm Fine @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP139", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "layer_height": "0.08", + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..c78721d0f2 --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL H2D 0.2 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "process", + "name": "0.12mm Draft @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP140", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "layer_height": "0.12", + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json b/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json new file mode 100644 index 0000000000..8f30020c83 --- /dev/null +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.12mm Fine @BBL H2D", + "inherits": "fdm_process_dual_0.12_nozzle_0.4", + "from": "system", + "setting_id": "GP142", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.12", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..05482a0f90 --- /dev/null +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL H2D 0.2 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "process", + "name": "0.14mm Extra Draft @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.14_nozzle_0.2", + "from": "system", + "setting_id": "GP141", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "layer_height": "0.14", + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL H2D.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL H2D.json new file mode 100644 index 0000000000..d7c5dfdcb1 --- /dev/null +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL H2D.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.16mm Optimal @BBL H2D", + "inherits": "fdm_process_dual_0.16_nozzle_0.4", + "from": "system", + "setting_id": "GP143", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.16", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Extra Fine @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Extra Fine @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..d4b092a5cc --- /dev/null +++ b/resources/profiles/BBL/process/0.18mm Extra Fine @BBL H2D 0.6 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "process", + "name": "0.18mm Extra Fine @BBL H2D 0.6 nozzle", + "inherits": "fdm_process_dual_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP137", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.18", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL H2D.json b/resources/profiles/BBL/process/0.24mm Draft @BBL H2D.json new file mode 100644 index 0000000000..5ca99d36c4 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL H2D.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.24mm Draft @BBL H2D", + "inherits": "fdm_process_dual_0.24_nozzle_0.4", + "from": "system", + "setting_id": "GP144", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.24", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Extra Fine @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Extra Fine @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..670b7fa6cc --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Extra Fine @BBL H2D 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "process", + "name": "0.24mm Extra Fine @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP138", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.24", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..2f53824643 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL H2D 0.6 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "process", + "name": "0.24mm Fine @BBL H2D 0.6 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP146", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.24", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL H2D.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL H2D.json new file mode 100644 index 0000000000..76abf3fe7c --- /dev/null +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL H2D.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.28mm Extra Draft @BBL H2D", + "inherits": "fdm_process_dual_0.28_nozzle_0.4", + "from": "system", + "setting_id": "GP145", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.28", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Fine @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Fine @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..fb007f7547 --- /dev/null +++ b/resources/profiles/BBL/process/0.32mm Fine @BBL H2D 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "process", + "name": "0.32mm Fine @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP149", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.32", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..e219381630 --- /dev/null +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL H2D 0.6 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "process", + "name": "0.36mm Draft @BBL H2D 0.6 nozzle", + "inherits": "fdm_process_dual_0.36_nozzle_0.6", + "from": "system", + "setting_id": "GP147", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.36", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..d1c1bd8210 --- /dev/null +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL H2D 0.6 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "process", + "name": "0.42mm Extra Draft @BBL H2D 0.6 nozzle", + "inherits": "fdm_process_dual_0.42_nozzle_0.6", + "from": "system", + "setting_id": "GP148", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.42", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..510dc9492b --- /dev/null +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL H2D 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "process", + "name": "0.48mm Draft @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.48_nozzle_0.8", + "from": "system", + "setting_id": "GP150", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.48", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..06f70a3b7d --- /dev/null +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL H2D 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "process", + "name": "0.56mm Extra Draft @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.56_nozzle_0.8", + "from": "system", + "setting_id": "GP151", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "layer_height": "0.56", + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json new file mode 100644 index 0000000000..9c7961d690 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.06_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json new file mode 100644 index 0000000000..32af79e056 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.08_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json new file mode 100644 index 0000000000..dc88e01f5e --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.08_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json new file mode 100644 index 0000000000..d188014759 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.12_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json new file mode 100644 index 0000000000..6e61697cc4 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.12_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json new file mode 100644 index 0000000000..6d20abfbbe --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.14_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json new file mode 100644 index 0000000000..91db8771fe --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.16_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json new file mode 100644 index 0000000000..cbf737f760 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json @@ -0,0 +1,56 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.18_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json new file mode 100644 index 0000000000..44e2eadcb0 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json new file mode 100644 index 0000000000..8ea14518d6 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json @@ -0,0 +1,56 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json new file mode 100644 index 0000000000..4c377e2544 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json @@ -0,0 +1,63 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json new file mode 100644 index 0000000000..ec5c3935db --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.28_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json new file mode 100644 index 0000000000..55abf628e3 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json @@ -0,0 +1,63 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.32_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json new file mode 100644 index 0000000000..24fa0db566 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json @@ -0,0 +1,56 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.36_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json new file mode 100644 index 0000000000..5d592fc8a7 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json @@ -0,0 +1,56 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.42_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json new file mode 100644 index 0000000000..f3d1b866fb --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json @@ -0,0 +1,63 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.48_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json new file mode 100644 index 0000000000..836b6e8b75 --- /dev/null +++ b/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json @@ -0,0 +1,63 @@ +{ + "type": "process", + "name": "fdm_process_dual_0.56_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file