Merge branch 'SoftFever:main' into dremel

localization/i18n/de/OrcaSlicer_de.po

@@ -11955,15 +11955,15 @@ msgstr ""
 "um das endgültige Produkt glatter und nahtloser aussehen zu lassen."
 
 msgid "Scarf joint seam (beta)"
-msgstr "Schaltnaht (Beta)"
+msgstr "Schrägnaht (Beta)"
 
 msgid "Use scarf joint to minimize seam visibility and increase seam strength."
 msgstr ""
-"Benutze Schaltnaht um die Sichtbarkeit der Naht zu minimieren und die "
+"Benutze die Schrägnaht um die Sichtbarkeit der Naht zu minimieren und die "
 "Nahtstärke zu erhöhen."
 
 msgid "Conditional scarf joint"
-msgstr "Bedingte Schaltnaht"
+msgstr "Bedingte Schrägnaht"
 
 msgid ""
 "Apply scarf joints only to smooth perimeters where traditional seams do not "
@@ -11983,10 +11983,10 @@ msgid ""
 "The default value is 155°."
 msgstr ""
 "Diese Option legt den Schwellenwinkel für das Anwenden einer bedingten "
-"Schaltnaht fest.\n"
+"Schrägnaht fest.\n"
 "Wenn der maximale Winkel innerhalb der Umfangsschleife diesen Wert "
 "überschreitet (was auf das Fehlen von scharfen Ecken hinweist), wird eine "
-"Schaltnaht verwendet. Der Standardwert beträgt 155°."
+"Schrägnaht verwendet. Der Standardwert beträgt 155°."
 
 msgid "Conditional overhang threshold"
 msgstr ""
@@ -12001,7 +12001,7 @@ msgid ""
 msgstr ""
 
 msgid "Scarf joint speed"
-msgstr "Schaltnaht Geschwindigkeit"
+msgstr "Schrägnaht Geschwindigkeit"
 
 msgid ""
 "This option sets the printing speed for scarf joints. It is recommended to "
@@ -12026,7 +12026,7 @@ msgstr ""
 "ist auf 100% eingestellt."
 
 msgid "Scarf joint flow ratio"
-msgstr "Schaltnaht Flussverhältnis"
+msgstr "Schrägnaht Flussverhältnis"
 
 msgid "This factor affects the amount of material for scarf joints."
 msgstr "Dieser Faktor beeinflusst die Menge an Material für Schaltnähte."
@@ -12039,38 +12039,38 @@ msgid ""
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height. The default value for this parameter is 0."
 msgstr ""
-"Start Höhe des Schaltnaht.\n"
+"Start Höhe der Schrägnaht.\n"
 "Diese Menge kann in Millimetern oder als Prozentsatz der aktuellen "
 "Schichthöhe angegeben werden.\n"
 "Der Standardwert für diesen Parameter beträgt 0."
 
 msgid "Scarf around entire wall"
-msgstr "Schaltnaht um die gesamte Wand"
+msgstr "Schrägnaht um die gesamte Wand"
 
 msgid "The scarf extends to the entire length of the wall."
-msgstr "Die Schaltnaht erstreckt sich über die gesamte Länge der Wand."
+msgstr "Die Schrägnaht erstreckt sich über die gesamte Länge der Wand."
 
 msgid "Scarf length"
-msgstr "Länge der Schaltnaht"
+msgstr "Länge der Schrägnaht"
 
 msgid ""
 "Length of the scarf. Setting this parameter to zero effectively disables the "
 "scarf."
 msgstr ""
-"Länge der Schaltnaht. Das Einstellen dieses Parameters auf Null deaktiviert "
+"Länge der Schrägnaht. Das Einstellen dieses Parameters auf Null deaktiviert "
-"effektiv die Schaltnaht."
+"effektiv die Schrägnaht."
 
 msgid "Scarf steps"
-msgstr "Schaltnaht Schritte"
+msgstr "Schrägnaht Schritte"
 
 msgid "Minimum number of segments of each scarf."
-msgstr "Mindestanzahl von Segmenten jeder Schaltnaht."
+msgstr "Mindestanzahl von Segmenten jeder Schrägnaht."
 
 msgid "Scarf joint for inner walls"
-msgstr "Schaltnaht für innere Wände"
+msgstr "Schrägnaht für innere Wände"
 
 msgid "Use scarf joint for inner walls as well."
-msgstr "Verwenden Sie Schaltnaht auch für innere Wände."
+msgstr "Verwenden Sie Schrägnaht auch für innere Wände."
 
 msgid "Role base wipe speed"
 msgstr "Rollenbasierte Wipe Geschwindigkeit"

localization/i18n/tr/OrcaSlicer_tr.po

@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: OrcaSlicer\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2024-03-29 21:10+0800\n"
-"PO-Revision-Date: 2024-03-14 22:00+0300\n"
+"PO-Revision-Date: 2024-03-29 21:50+0300\n"
 "Last-Translator: Olcay ÖREN\n"
 "Language-Team: Türkçe\n"
 "Language: tr_TR\n"
@@ -3446,6 +3446,8 @@ msgid ""
 "seam_slope_start_height need to be smaller than layer_height.\n"
 "Reset to 0."
 msgstr ""
+"Dikiş eğimi başlangıç ​​yüksekliğinin katman yüksekliğinden daha küçük olması gerekir.\n"
+"0 a sıfırla."
 
 msgid "Auto bed leveling"
 msgstr "Otomatik yatak tesviyesi"
@@ -6121,7 +6123,7 @@ msgid "Stealth Mode"
 msgstr "Gizli mod"
 
 msgid "Enable network plugin"
-msgstr ""
+msgstr "Ağ eklentisini etkinleştir"
 
 msgid "Check for stable updates only"
 msgstr "Yalnızca kararlı güncellemeleri kontrol edin"
@@ -6181,7 +6183,7 @@ msgid "If enabled, auto-calculate everytime the color changed."
 msgstr "Etkinleştirilirse, renk her değiştiğinde otomatik hesapla."
 
 msgid "Network"
-msgstr ""
+msgstr "Ağ"
 
 msgid "Auto sync user presets(Printer/Filament/Process)"
 msgstr "Kullanıcı ön ayarları otomatik senkronizasyon (Yazıcı/Filament/İşlem)"
@@ -8766,10 +8768,10 @@ msgid "Printer preset names"
 msgstr "Yazıcı ön ayar adları"
 
 msgid "Use 3rd-party print host"
-msgstr ""
+msgstr "3. taraf yazdırma ana bilgisayarını kullanın"
 
 msgid "Allow controlling BambuLab's printer through 3rd party print hosts"
-msgstr ""
+msgstr "BambuLab yazıcısının 3. taraf yazdırma ana bilgisayarları aracılığıyla kontrol edilmesine izin ver"
 
 msgid "Hostname, IP or URL"
 msgstr "Ana bilgisayar adı, IP veya URL"
@@ -11653,6 +11655,7 @@ msgstr "Kalan yazdırma süresini ayarlamayı devre dışı bırak"
 msgid ""
 "Disable generating of the M73: Set remaining print time in the final gcode"
 msgstr ""
+"M73'ün oluşturulmasını devre dışı bırakın: Son gcode'da kalan yazdırma süresini ayarlayın"
 
 msgid "Seam position"
 msgstr "Dikiş konumu"
@@ -11731,7 +11734,7 @@ msgstr ""
 "Varsayılan değer 155°'dir."
 
 msgid "Conditional overhang threshold"
-msgstr ""
+msgstr "Koşullu çıkıntı eşiği"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -11741,6 +11744,11 @@ msgid ""
 "at 40% of the external wall's width. Due to performance considerations, the "
 "degree of overhang is estimated."
 msgstr ""
+"Bu seçenek, atkı bağlantı dikişlerinin uygulanması için sarkma "
+"eşiğini belirler. Çevrenin desteklenmeyen kısmı bu eşikten az ise atkı "
+"birleştirme dikişleri uygulanacaktır. Varsayılan eşik, dış duvar genişliğinin "
+"%40'ına ayarlanmıştır. Performans değerlendirmeleri nedeniyle çıkıntının "
+"derecesi tahmin edilir."
 
 msgid "Scarf joint speed"
 msgstr "Atkı birleşim hızı"
@@ -14224,7 +14232,7 @@ msgid "Export Log"
 msgstr "Logu Dışa Aktar"
 
 msgid "OrcaSlicer Version:"
-msgstr ""
+msgstr "OrcaSlicer Sürümü:"
 
 msgid "System Version:"
 msgstr "Sistem Versiyonu:"
@@ -14233,10 +14241,10 @@ msgid "DNS Server:"
 msgstr "Dns sunucusu:"
 
 msgid "Test OrcaSlicer(GitHub)"
-msgstr ""
+msgstr "OrcaSlicer'ı (GitHub) test edin"
 
 msgid "Test OrcaSlicer(GitHub):"
-msgstr ""
+msgstr "OrcaSlicer'ı (GitHub) test edin:"
 
 msgid "Test Bing.com"
 msgstr "Bing.com'u test edin"
@@ -14762,7 +14770,7 @@ msgid "Success!"
 msgstr "Başarılı!"
 
 msgid "Are you sure to log out?"
-msgstr ""
+msgstr "Çıkış yaptığınızdan emin misiniz?"
 
 msgid "Refresh Printers"
 msgstr "Yazıcıları Yenile"
@@ -14796,7 +14804,7 @@ msgstr ""
 "Anahtarlığa aktarın."
 
 msgid "Login/Test"
-msgstr ""
+msgstr "Giriş/Test"
 
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
@@ -14936,45 +14944,47 @@ msgstr ""
 "Hata: \"%2%\""
 
 msgid "Connected to Obico successfully!"
-msgstr ""
+msgstr "Obico'ya başarıyla bağlanıldı!"
 
 msgid "Could not connect to Obico"
-msgstr ""
+msgstr "Obico'ya bağlanılamadı"
 
 msgid "Connected to SimplyPrint successfully!"
-msgstr ""
+msgstr "SimplyPrint'e başarıyla bağlanıldı!"
 
 msgid "Could not connect to SimplyPrint"
-msgstr ""
+msgstr "SimplyPrint'e bağlanılamadı"
 
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
+msgstr "SimplyPrint hesabı bağlı değil. Ayarlamak için Bağlantı seçeneklerine gidin."
 
 msgid ""
 "File size exceeds the 100MB upload limit. Please upload your file through "
 "the panel."
 msgstr ""
+"Dosya boyutu 100 MB yükleme sınırını aşıyor. Lütfen dosyanızı panel "
+"üzerinden yükleyiniz."
 
 msgid "Unknown error"
-msgstr ""
+msgstr "Bilinmeyen hata"
 
 msgid "Connection to Flashforge works correctly."
-msgstr ""
+msgstr "Flashforge bağlantısı düzgün çalışıyor."
 
 msgid "Could not connect to Flashforge"
-msgstr ""
+msgstr "Flashforge'a bağlanılamadı"
 
 msgid "The provided state is not correct."
-msgstr ""
+msgstr "Sağlanan durum doğru değil."
 
 msgid "Please give the required permissions when authorizing this application."
-msgstr ""
+msgstr "Lütfen bu uygulamaya yetki verirken gerekli izinleri verin."
 
 msgid "Something unexpected happened when trying to log in, please try again."
-msgstr ""
+msgstr "Giriş yapmaya çalışırken beklenmeyen bir şey oldu, lütfen tekrar deneyin."
 
 msgid "User cancelled."
-msgstr ""
+msgstr "Kullanıcı iptal edildi."
 
 #: resources/data/hints.ini: [hint:Precise wall]
 msgid ""

resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json

@@ -118,8 +118,8 @@
     "default_filament_profile": [
       "Creality Generic PLA"
     ],
-    "machine_start_gcode": "M220 S100 ;Reset feed rate /nM221 S100 ;Reset flow rate /nG28 ;Home /nG92 E0 ;Reset extruder /nG1 Z2.0 F3000 ;Move Z Axis up /nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position /nM109 S[material_print_temperature_layer_0] /nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line /nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
-    "machine_end_gcode": "G91 ;Relative positioning /nG1 E-2 F2700 ;Retract a bit /nG1 E-2 Z0.2 F2400 ;Retract and raise Z /nG1 X5 Y5 F3000 ;Wipe out /nG1 Z3 ;Raise Z more /nG90 ;Absolute positioning /nG1 X2 Y218 F3000 ;Present print /nM106 S0 ;Turn-off fan /nM104 S0 ;Turn-off hotend /nM140 S0 ;Turn-off bed /nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
     "thumbnails": [
       "96x96",

resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json

@@ -118,8 +118,8 @@
     "default_filament_profile": [
       "Creality Generic PLA"
     ],
-    "machine_start_gcode": "M220 S100 ;Reset feed rate /nM221 S100 ;Reset flow rate /nG28 ;Home /nG92 E0 ;Reset extruder /nG1 Z2.0 F3000 ;Move Z Axis up /nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position /nM109 S[material_print_temperature_layer_0] /nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line /nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
-    "machine_end_gcode": "G91 ;Relative positioning /nG1 E-2 F2700 ;Retract a bit /nG1 E-2 Z0.2 F2400 ;Retract and raise Z /nG1 X5 Y5 F3000 ;Wipe out /nG1 Z3 ;Raise Z more /nG90 ;Absolute positioning /nG1 X2 Y218 F3000 ;Present print /nM106 S0 ;Turn-off fan /nM104 S0 ;Turn-off hotend /nM140 S0 ;Turn-off bed /nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
     "thumbnails": [
       "96x96",

resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json

@@ -118,8 +118,8 @@
     "default_filament_profile": [
       "Creality Generic PLA"
     ],
-    "machine_start_gcode": "M220 S100 ;Reset feed rate /nM221 S100 ;Reset flow rate /nG28 ;Home /nG92 E0 ;Reset extruder /nG1 Z2.0 F3000 ;Move Z Axis up /nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position /nM109 S[material_print_temperature_layer_0] /nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line /nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
-    "machine_end_gcode": "G91 ;Relative positioning /nG1 E-2 F2700 ;Retract a bit /nG1 E-2 Z0.2 F2400 ;Retract and raise Z /nG1 X5 Y5 F3000 ;Wipe out /nG1 Z3 ;Raise Z more /nG90 ;Absolute positioning /nG1 X2 Y218 F3000 ;Present print /nM106 S0 ;Turn-off fan /nM104 S0 ;Turn-off hotend /nM140 S0 ;Turn-off bed /nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
     "thumbnails": [
       "96x96",

resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json

@@ -118,8 +118,8 @@
     "default_filament_profile": [
       "Creality Generic PLA"
     ],
-    "machine_start_gcode": "M220 S100 ;Reset feed rate /nM221 S100 ;Reset flow rate /nG28 ;Home /nG92 E0 ;Reset extruder /nG1 Z2.0 F3000 ;Move Z Axis up /nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position /nM109 S[material_print_temperature_layer_0] /nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line /nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[material_print_temperature_layer_0] \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
-    "machine_end_gcode": "G91 ;Relative positioning /nG1 E-2 F2700 ;Retract a bit /nG1 E-2 Z0.2 F2400 ;Retract and raise Z /nG1 X5 Y5 F3000 ;Wipe out /nG1 Z3 ;Raise Z more /nG90 ;Absolute positioning /nG1 X2 Y218 F3000 ;Present print /nM106 S0 ;Turn-off fan /nM104 S0 ;Turn-off hotend /nM140 S0 ;Turn-off bed /nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
     "thumbnails": [
       "96x96",