3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-10-19 14:51:11 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

Merged optimized print profiles from Comgrow Official (#2454)

Browse source 
* Merged optimized print profiles from Comgrow Official

* Corrected profile naming convention
This commit is contained in:
Trist0ne 2023-10-19 10:49:22 -04:00 • committed by GitHub
parent 56fdbf5310
commit acbf27036c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
23 changed files with 1612 additions and 172 deletions
Download patch file Download diff file Expand all files Collapse all files

3
resources/profiles/Comgrow/machine/Comgrow T500 0.6 nozzle.json
View file

@ -10,9 +10,6 @@
"retraction_length": [
"1.0"
],
"z_hop": [
"0.3"
],
"nozzle_diameter": [
"0.6"
],

3
resources/profiles/Comgrow/machine/Comgrow T500 0.8 nozzle.json
View file

@ -10,9 +10,6 @@
"retraction_length": [
"1.0"
],
"z_hop": [
"0.3"
],
"nozzle_diameter": [
"0.8"
],

6
resources/profiles/Comgrow/machine/fdm_comgrow_common.json
View file

@ -102,7 +102,7 @@
"2"
],
"z_hop": [
"0.2"
"0"
],
"retract_restart_extra": [
"0"
@ -131,8 +131,8 @@
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
"machine_end_gcode": "PRINT_END",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"scan_first_layer": "0",