3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-14 02:07:54 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Merge branch 'master' into time_estimate

Browse source
This commit is contained in:
bubnikv 2018-08-03 23:04:44 +02:00
commit ac2b20b54b
60 changed files with 2959 additions and 1548 deletions
Download patch file Download diff file Expand all files Collapse all files

22
xs/src/libslic3r/PrintConfig.cpp
View file

@ -504,15 +504,27 @@ PrintConfigDef::PrintConfigDef()
def = this->add("filament_cooling_initial_speed", coFloats);
def->label = L("Speed of the first cooling move");
def->tooltip = L("Cooling moves are gradually accelerating beginning at this speed. ");
def->cli = "filament-cooling-initial-speed=i@";
def->cli = "filament-cooling-initial-speed=f@";
def->sidetext = L("mm/s");
def->min = 0;
def->default_value = new ConfigOptionFloats { 2.2f };
def = this->add("filament_minimal_purge_on_wipe_tower", coFloats);
def->label = L("Minimal purge on wipe tower");
def->tooltip = L("After a toolchange, certain amount of filament is used for purging. This "
"can end up on the wipe tower, infill or sacrificial object. If there was "
"enough infill etc. available, this could result in bad quality at the beginning "
"of purging. This is a minimum that must be wiped on the wipe tower before "
"Slic3r considers moving elsewhere. ");
def->cli = "filament-minimal-purge-on-wipe-tower=f@";
def->sidetext = L("mm³");
def->min = 0;
def->default_value = new ConfigOptionFloats { 5.f };
def = this->add("filament_cooling_final_speed", coFloats);
def->label = L("Speed of the last cooling move");
def->tooltip = L("Cooling moves are gradually accelerating towards this speed. ");
def->cli = "filament-cooling-final-speed=i@";
def->cli = "filament-cooling-final-speed=f@";
def->sidetext = L("mm/s");
def->min = 0;
def->default_value = new ConfigOptionFloats { 3.4f };
@ -1639,6 +1651,12 @@ PrintConfigDef::PrintConfigDef()
def->cli = "single-extruder-multi-material!";
def->default_value = new ConfigOptionBool(false);
def = this->add("single_extruder_multi_material_priming", coBool);
def->label = L("Prime all printing extruders");
def->tooltip = L("If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print.");
def->cli = "single-extruder-multi-material-priming!";
def->default_value = new ConfigOptionBool(true);
def = this->add("support_material", coBool);
def->label = L("Generate support material");
def->category = L("Support material");