[Translations] Added missing strings from 1.9.0 (#3655)

* Added missing strings from 1.9.0

* Uniformisation : "processus" is "traitement"

* Center is infinitive

* Clarified "Start temp", "End temp" and "Temp step"
This commit is contained in:
Thomas 2024-01-15 15:08:23 +01:00 committed by GitHub
parent 698aba3570
commit a9c572f0a9
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
17 changed files with 5635 additions and 6014 deletions

View file

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-12-29 22:55+0800\n"
"POT-Creation-Date: 2024-01-13 17:34+0100\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -2289,15 +2289,15 @@ msgstr "No printer"
msgid "..."
msgstr ""
msgid "Failed to connect to the server"
msgstr "Failed to connect to the server"
msgid "Check the status of current system services"
msgstr "Check the status of current system services"
msgid "code"
msgstr "code"
msgid "Failed to connect to the server"
msgstr "Failed to connect to the server"
msgid "Failed to connect to cloud service"
msgstr "Failed to connect to cloud service"
@ -4444,6 +4444,12 @@ msgid_plural ""
msgstr[0] ""
msgstr[1] ""
msgid ""
"\n"
"Hint: Make sure you have added the corresponding printer before importing "
"the configs."
msgstr ""
msgid "Import result"
msgstr "Import result"
@ -5375,11 +5381,27 @@ msgstr "The 3mf is not supported by OrcaSlicer, loading geometry data only."
msgid "Load 3mf"
msgstr "Load 3mf"
msgid "The Config can not be loaded."
msgstr "The Config cannot be loaded."
msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
#, c-format, boost-format
msgid ""
"The 3mf's version %s is newer than %s's version %s, Found following keys "
"unrecognized:"
msgstr ""
"The 3mf's version %s is newer than %s's version %s, Found following keys "
"unrecognized:"
msgid "You'd better upgrade your software.\n"
msgstr "You should update your software.\n"
msgid "Newer 3mf version"
msgstr "Newer 3mf version"
#, c-format, boost-format
msgid ""
"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
"software."
msgstr ""
"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
"software."
msgid "Invalid values found in the 3mf:"
msgstr "Invalid values found in the 3mf:"
@ -6744,13 +6766,13 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgid "Line width"
msgstr "Line width"
@ -7591,6 +7613,15 @@ msgstr "Gizmo SLA support points"
msgid "Gizmo FDM paint-on seam"
msgstr "Gizmo FDM paint-on seam"
msgid "Gizmo Text emboss / engrave"
msgstr ""
msgid "Zoom in"
msgstr ""
msgid "Zoom out"
msgstr ""
msgid "Switch between Prepare/Preview"
msgstr ""
@ -8922,6 +8953,47 @@ msgid ""
"using large nozzles."
msgstr ""
msgid "Don't filter out small internal bridges (experimental)"
msgstr ""
msgid ""
"This option can help reducing pillowing on top surfaces in heavily slanted "
"or curved models.\n"
"\n"
"By default, small internal bridges are filtered out and the internal solid "
"infill is printed directly over the sparse infill. This works well in most "
"cases, speeding up printing without too much compromise on top surface "
"quality. \n"
"\n"
"However, in heavily slanted or curved models especially where too low sparse "
"infill density is used, this may result in curling of the unsupported solid "
"infill, causing pillowing.\n"
"\n"
"Enabling this option will print internal bridge layer over slightly "
"unsupported internal solid infill. The options below control the amount of "
"filtering, i.e. the amount of internal bridges created.\n"
"\n"
"Disabled - Disables this option. This is the default behaviour and works "
"well in most cases.\n"
"\n"
"Limited filtering - Creates internal bridges on heavily slanted surfaces, "
"while avoiding creating uncessesary interal bridges. This works well for "
"most difficult models.\n"
"\n"
"No filtering - Creates internal bridges on every potential internal "
"overhang. This option is useful for heavily slanted top surface models. "
"However, in most cases it creates too many unecessary bridges."
msgstr ""
msgid "Disabled"
msgstr ""
msgid "Limited filtering"
msgstr ""
msgid "No filtering"
msgstr ""
msgid "Max bridge length"
msgstr "Max bridge length"
@ -9635,10 +9707,10 @@ msgstr "Full fan speed at layer"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
@ -9864,6 +9936,12 @@ msgstr "What kind of G-code the printer is compatible with."
msgid "Klipper"
msgstr ""
msgid "Support multi bed types"
msgstr ""
msgid "Enable this option if you want to use multiple bed types"
msgstr ""
msgid "Label objects"
msgstr ""
@ -11616,6 +11694,20 @@ msgstr ""
"feature size will be widened to the minimum wall width. It's expressed as a "
"percentage over nozzle diameter"
msgid "Minimum wall length"
msgstr ""
msgid ""
"Adjust this value to prevent short, unclosed walls from being printed, which "
"could increase print time. Higher values remove more and longer walls.\n"
"\n"
"NOTE: Bottom and top surfaces will not be affected by this value to prevent "
"visual gaps on the ouside of the model. Adjust 'One wall threshold' in the "
"Advanced settings below to adjust the sensitivity of what is considered a "
"top-surface. 'One wall threshold' is only visibile if this setting is set "
"above the default value of 0.5, or if single-wall top surfaces is enabled."
msgstr ""
msgid "First layer minimum wall width"
msgstr ""
@ -12662,8 +12754,8 @@ msgid ""
msgstr ""
msgid ""
"We would rename the presets as \"Vendor Type Serial @printer you selected"
"\". \n"
"We would rename the presets as \"Vendor Type Serial @printer you "
"selected\". \n"
"To add preset for more prinetrs, Please go to printer selection"
msgstr ""
@ -13177,336 +13269,196 @@ msgid ""
"Error: \"%2%\""
msgstr ""
#: resources/data/hints.ini: [hint:Precise wall]
msgid ""
"Precise wall\n"
"Did you know that turning on precise wall can improve precision and layer "
"consistency?"
msgstr ""
#~ msgid "The Config can not be loaded."
#~ msgstr "The Config cannot be loaded."
#: resources/data/hints.ini: [hint:Sandwich mode]
msgid ""
"Sandwich mode\n"
"Did you know that you can use sandwich mode (inner-outer-inner) to improve "
"precision and layer consistency if your model doesn't have very steep "
"overhangs?"
msgstr ""
#~ msgid ""
#~ "Cut Tool\n"
#~ "Did you know that you can cut a model at any angle and position with the "
#~ "cutting tool?"
#~ msgstr ""
#~ "Cut Tool\n"
#~ "Did you know that you can cut a model at any angle and position with the "
#~ "cutting tool?"
#: resources/data/hints.ini: [hint:Chamber temperature]
msgid ""
"Chamber temperature\n"
"Did you know that OrcaSlicer supports chamber temperature?"
msgstr ""
#~ msgid ""
#~ "Timelapse\n"
#~ "Did you know that you can generate a timelapse video during each print?"
#~ msgstr ""
#~ "Timelapse\n"
#~ "Did you know that you can generate a timelapse video during each print?"
#: resources/data/hints.ini: [hint:Calibration]
msgid ""
"Calibration\n"
"Did you know that calibrating your printer can do wonders? Check out our "
"beloved calibration solution in OrcaSlicer."
msgstr ""
#~ msgid ""
#~ "Auto-Arrange\n"
#~ "Did you know that you can auto-arrange all objects in your project?"
#~ msgstr ""
#~ "Auto-Arrange\n"
#~ "Did you know that you can auto-arrange all the objects in your project?"
#: resources/data/hints.ini: [hint:Auxiliary fan]
msgid ""
"Auxiliary fan\n"
"Did you know that OrcaSlicer supports Auxiliary part cooling fan?"
msgstr ""
#~ msgid ""
#~ "Auto-Orient\n"
#~ "Did you know that you can rotate objects to an optimal orientation for "
#~ "printing by a simple click?"
#~ msgstr ""
#~ "Auto-Orient\n"
#~ "Did you know that you can rotate objects to an optimal orientation for "
#~ "printing with a simple click?"
#: resources/data/hints.ini: [hint:Air filtration]
msgid ""
"Air filtration/Exhuast Fan\n"
"Did you know that OrcaSlicer can support Air filtration/Exhuast Fan?"
msgstr ""
#~ msgid ""
#~ "Lay on Face\n"
#~ "Did you know that you can quickly orient a model so that one of its faces "
#~ "sits on the print bed? Select the \"Place on face\" function or press the "
#~ "<b>F</b> key."
#~ msgstr ""
#~ "Lay on Face\n"
#~ "Did you know that you can quickly orient a model so that one of its faces "
#~ "sits on the print bed? Select the \"Place on face\" function or press the "
#~ "<b>F</b> key."
#: resources/data/hints.ini: [hint:G-code window]
msgid ""
"G-code window\n"
"You can turn on/off the G-code window by pressing the <b>C</b> key."
msgstr ""
#~ msgid ""
#~ "Object List\n"
#~ "Did you know that you can view all objects/parts in a list and change "
#~ "settings for each object/part?"
#~ msgstr ""
#~ "Object List\n"
#~ "Did you know that you can view all objects/parts in a list and change "
#~ "settings for each object/part?"
#: resources/data/hints.ini: [hint:Switch workspaces]
msgid ""
"Switch workspaces\n"
"You can switch between <b>Prepare</b> and <b>Preview</b> workspaces by "
"pressing the <b>Tab</b> key."
msgstr ""
#~ msgid ""
#~ "Slicing Parameter Table\n"
#~ "Did you know that you can view all objects/parts on a table and change "
#~ "settings for each object/part?"
#~ msgstr ""
#~ "Slicing Parameter Table\n"
#~ "Did you know that you can view all objects/parts on a table and change "
#~ "settings for each object/part?"
#: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
msgid ""
"How to use keyboard shortcuts\n"
"Did you know that Orca Slicer offers a wide range of keyboard shortcuts and "
"3D scene operations."
msgstr ""
#~ msgid ""
#~ "Split to Objects/Parts\n"
#~ "Did you know that you can split a big object into small ones for easy "
#~ "colorizing or printing?"
#~ msgstr ""
#~ "Split to Objects/Parts\n"
#~ "Did you know that you can split a big object into small ones for easy "
#~ "colorizing or printing?"
#: resources/data/hints.ini: [hint:Reverse on odd]
msgid ""
"Reverse on odd\n"
"Did you know that <b>Reverse on odd</b> feature can significantly improve "
"the surface quality of your overhangs?"
msgstr ""
#~ msgid ""
#~ "Z seam location\n"
#~ "Did you know that you can customize the location of the Z seam, and even "
#~ "paint it on your print, to have it in a less visible location? This "
#~ "improves the overall look of your model. Check it out!"
#~ msgstr ""
#~ "Z seam location\n"
#~ "Did you know that you can customize the location of the Z seam, and even "
#~ "paint it on your print, to have it in a less visible location? This "
#~ "improves the overall look of your model. Check it out!"
#: resources/data/hints.ini: [hint:Cut Tool]
msgid ""
"Cut Tool\n"
"Did you know that you can cut a model at any angle and position with the "
"cutting tool?"
msgstr ""
"Cut Tool\n"
"Did you know that you can cut a model at any angle and position with the "
"cutting tool?"
#~ msgid ""
#~ "Fine-tuning for flow rate\n"
#~ "Did you know that flow rate can be fine-tuned for even better-looking "
#~ "prints? Depending on the material, you can improve the overall finish of "
#~ "the printed model by doing some fine-tuning."
#~ msgstr ""
#~ "Fine-tuning for flow rate\n"
#~ "Did you know that flow rate can be fine-tuned for even better-looking "
#~ "prints? Depending on the material, you can improve the overall finish of "
#~ "the printed model by doing some fine-tuning."
#: resources/data/hints.ini: [hint:Fix Model]
msgid ""
"Fix Model\n"
"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing "
"problems on the Windows system?"
msgstr ""
#~ msgid ""
#~ "Split your prints into plates\n"
#~ "Did you know that you can split a model that has a lot of parts into "
#~ "individual plates ready to print? This will simplify the process of "
#~ "keeping track of all the parts."
#~ msgstr ""
#~ "Split your prints into plates\n"
#~ "Did you know that you can split a model that has a lot of parts into "
#~ "individual plates ready to print? This will simplify the process of "
#~ "keeping track of all the parts."
#: resources/data/hints.ini: [hint:Timelapse]
msgid ""
"Timelapse\n"
"Did you know that you can generate a timelapse video during each print?"
msgstr ""
"Timelapse\n"
"Did you know that you can generate a timelapse video during each print?"
#~ msgid ""
#~ "Speed up your print with Adaptive Layer Height\n"
#~ "Did you know that you can print a model even faster, by using the "
#~ "Adaptive Layer Height option? Check it out!"
#~ msgstr ""
#~ "Speed up your print with Adaptive Layer Height\n"
#~ "Did you know that you can print a model even faster by using the Adaptive "
#~ "Layer Height option? Check it out!"
#: resources/data/hints.ini: [hint:Auto-Arrange]
msgid ""
"Auto-Arrange\n"
"Did you know that you can auto-arrange all objects in your project?"
msgstr ""
"Auto-Arrange\n"
"Did you know that you can auto-arrange all the objects in your project?"
#~ msgid ""
#~ "Support painting\n"
#~ "Did you know that you can paint the location of your supports? This "
#~ "feature makes it easy to place the support material only on the sections "
#~ "of the model that actually need it."
#~ msgstr ""
#~ "Support painting\n"
#~ "Did you know that you can paint the location of your supports? This "
#~ "feature makes it easy to place the support material only on the sections "
#~ "of the model that actually need it."
#: resources/data/hints.ini: [hint:Auto-Orient]
msgid ""
"Auto-Orient\n"
"Did you know that you can rotate objects to an optimal orientation for "
"printing by a simple click?"
msgstr ""
"Auto-Orient\n"
"Did you know that you can rotate objects to an optimal orientation for "
"printing with a simple click?"
#~ msgid ""
#~ "Different types of supports\n"
#~ "Did you know that you can choose from multiple types of supports? Tree "
#~ "supports work great for organic models, while saving filament and "
#~ "improving print speed. Check them out!"
#~ msgstr ""
#~ "Different types of supports\n"
#~ "Did you know that you can choose from multiple types of supports? Tree "
#~ "supports work great for organic models while saving filament and "
#~ "improving print speed. Check them out!"
#: resources/data/hints.ini: [hint:Lay on Face]
msgid ""
"Lay on Face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the \"Place on face\" function or press the "
"<b>F</b> key."
msgstr ""
"Lay on Face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the \"Place on face\" function or press the "
"<b>F</b> key."
#~ msgid ""
#~ "Printing Silk Filament\n"
#~ "Did you know that Silk filament needs special consideration to print it "
#~ "successfully? Higher temperature and lower speed are always recommended "
#~ "for the best results."
#~ msgstr ""
#~ "Printing Silk Filament\n"
#~ "Did you know that Silk filament needs special consideration to print "
#~ "successfully? A higher temperature and lower speed are always recommended "
#~ "for the best results."
#: resources/data/hints.ini: [hint:Object List]
msgid ""
"Object List\n"
"Did you know that you can view all objects/parts in a list and change "
"settings for each object/part?"
msgstr ""
"Object List\n"
"Did you know that you can view all objects/parts in a list and change "
"settings for each object/part?"
#~ msgid ""
#~ "Brim for better adhesion\n"
#~ "Did you know that when printing models have a small contact interface "
#~ "with the printing surface, it's recommended to use a brim?"
#~ msgstr ""
#~ "Brim for better adhesion\n"
#~ "Did you know that when printed models have a small contact interface with "
#~ "the printing surface, it's recommended to use a brim?"
#: resources/data/hints.ini: [hint:Search Functionality]
msgid ""
"Search Functionality\n"
"Did you know that you use the Search tool to quickly find a specific Orca "
"Slicer setting?"
msgstr ""
#~ msgid ""
#~ "Set parameters for multiple objects\n"
#~ "Did you know that you can set slicing parameters for all selected objects "
#~ "at one time?"
#~ msgstr ""
#~ "Set parameters for multiple objects\n"
#~ "Did you know that you can set slicing parameters for all selected objects "
#~ "at once?"
#: resources/data/hints.ini: [hint:Simplify Model]
msgid ""
"Simplify Model\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model."
msgstr ""
#~ msgid ""
#~ "Stack objects\n"
#~ "Did you know that you can stack objects as a whole one?"
#~ msgstr ""
#~ "Stack objects\n"
#~ "Did you know that you can stack objects as a whole one?"
#: resources/data/hints.ini: [hint:Slicing Parameter Table]
msgid ""
"Slicing Parameter Table\n"
"Did you know that you can view all objects/parts on a table and change "
"settings for each object/part?"
msgstr ""
"Slicing Parameter Table\n"
"Did you know that you can view all objects/parts on a table and change "
"settings for each object/part?"
#~ msgid ""
#~ "Flush into support/objects/infill\n"
#~ "Did you know that you can save the wasted filament by flushing them into "
#~ "support/objects/infill during filament change?"
#~ msgstr ""
#~ "Flush into support/objects/infill\n"
#~ "Did you know that you can reduce wasted filament by flushing it into "
#~ "support/objects/infill during filament changes?"
#: resources/data/hints.ini: [hint:Split to Objects/Parts]
msgid ""
"Split to Objects/Parts\n"
"Did you know that you can split a big object into small ones for easy "
"colorizing or printing?"
msgstr ""
"Split to Objects/Parts\n"
"Did you know that you can split a big object into small ones for easy "
"colorizing or printing?"
#: resources/data/hints.ini: [hint:Subtract a Part]
msgid ""
"Subtract a Part\n"
"Did you know that you can subtract one mesh from another using the Negative "
"part modifier? That way you can, for example, create easily resizable holes "
"directly in Orca Slicer."
msgstr ""
#: resources/data/hints.ini: [hint:STEP]
msgid ""
"STEP\n"
"Did you know that you can improve your print quality by slicing a STEP file "
"instead of an STL?\n"
"Orca Slicer supports slicing STEP files, providing smoother results than a "
"lower resolution STL. Give it a try!"
msgstr ""
#: resources/data/hints.ini: [hint:Z seam location]
msgid ""
"Z seam location\n"
"Did you know that you can customize the location of the Z seam, and even "
"paint it on your print, to have it in a less visible location? This improves "
"the overall look of your model. Check it out!"
msgstr ""
"Z seam location\n"
"Did you know that you can customize the location of the Z seam, and even "
"paint it on your print, to have it in a less visible location? This improves "
"the overall look of your model. Check it out!"
#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
msgid ""
"Fine-tuning for flow rate\n"
"Did you know that flow rate can be fine-tuned for even better-looking "
"prints? Depending on the material, you can improve the overall finish of the "
"printed model by doing some fine-tuning."
msgstr ""
"Fine-tuning for flow rate\n"
"Did you know that flow rate can be fine-tuned for even better-looking "
"prints? Depending on the material, you can improve the overall finish of the "
"printed model by doing some fine-tuning."
#: resources/data/hints.ini: [hint:Split your prints into plates]
msgid ""
"Split your prints into plates\n"
"Did you know that you can split a model that has a lot of parts into "
"individual plates ready to print? This will simplify the process of keeping "
"track of all the parts."
msgstr ""
"Split your prints into plates\n"
"Did you know that you can split a model that has a lot of parts into "
"individual plates ready to print? This will simplify the process of keeping "
"track of all the parts."
#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer
#: Height]
msgid ""
"Speed up your print with Adaptive Layer Height\n"
"Did you know that you can print a model even faster, by using the Adaptive "
"Layer Height option? Check it out!"
msgstr ""
"Speed up your print with Adaptive Layer Height\n"
"Did you know that you can print a model even faster by using the Adaptive "
"Layer Height option? Check it out!"
#: resources/data/hints.ini: [hint:Support painting]
msgid ""
"Support painting\n"
"Did you know that you can paint the location of your supports? This feature "
"makes it easy to place the support material only on the sections of the "
"model that actually need it."
msgstr ""
"Support painting\n"
"Did you know that you can paint the location of your supports? This feature "
"makes it easy to place the support material only on the sections of the "
"model that actually need it."
#: resources/data/hints.ini: [hint:Different types of supports]
msgid ""
"Different types of supports\n"
"Did you know that you can choose from multiple types of supports? Tree "
"supports work great for organic models, while saving filament and improving "
"print speed. Check them out!"
msgstr ""
"Different types of supports\n"
"Did you know that you can choose from multiple types of supports? Tree "
"supports work great for organic models while saving filament and improving "
"print speed. Check them out!"
#: resources/data/hints.ini: [hint:Printing Silk Filament]
msgid ""
"Printing Silk Filament\n"
"Did you know that Silk filament needs special consideration to print it "
"successfully? Higher temperature and lower speed are always recommended for "
"the best results."
msgstr ""
"Printing Silk Filament\n"
"Did you know that Silk filament needs special consideration to print "
"successfully? A higher temperature and lower speed are always recommended "
"for the best results."
#: resources/data/hints.ini: [hint:Brim for better adhesion]
msgid ""
"Brim for better adhesion\n"
"Did you know that when printing models have a small contact interface with "
"the printing surface, it's recommended to use a brim?"
msgstr ""
"Brim for better adhesion\n"
"Did you know that when printed models have a small contact interface with "
"the printing surface, it's recommended to use a brim?"
#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
msgid ""
"Set parameters for multiple objects\n"
"Did you know that you can set slicing parameters for all selected objects at "
"one time?"
msgstr ""
"Set parameters for multiple objects\n"
"Did you know that you can set slicing parameters for all selected objects at "
"once?"
#: resources/data/hints.ini: [hint:Stack objects]
msgid ""
"Stack objects\n"
"Did you know that you can stack objects as a whole one?"
msgstr ""
"Stack objects\n"
"Did you know that you can stack objects as a whole one?"
#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
msgid ""
"Flush into support/objects/infill\n"
"Did you know that you can save the wasted filament by flushing them into "
"support/objects/infill during filament change?"
msgstr ""
"Flush into support/objects/infill\n"
"Did you know that you can reduce wasted filament by flushing it into support/"
"objects/infill during filament changes?"
#: resources/data/hints.ini: [hint:Improve strength]
msgid ""
"Improve strength\n"
"Did you know that you can use more wall loops and higher sparse infill "
"density to improve the strength of the model?"
msgstr ""
"Improve strength\n"
"Did you know that you can use more wall loops and higher sparse infill "
"density to improve the strength of the model?"
#: resources/data/hints.ini: [hint:When need to print with the printer door
#: opened]
msgid ""
"When need to print with the printer door opened\n"
"Did you know that opening the printer door can reduce the probability of "
"extruder/hotend clogging when printing lower temperature filament with a "
"higher enclosure temperature. More info about this in the Wiki."
msgstr ""
#: resources/data/hints.ini: [hint:Avoid warping]
msgid ""
"Avoid warping\n"
"Did you know that when printing materials that are prone to warping such as "
"ABS, appropriately increasing the heatbed temperature can reduce the "
"probability of warping."
msgstr ""
#~ msgid ""
#~ "Improve strength\n"
#~ "Did you know that you can use more wall loops and higher sparse infill "
#~ "density to improve the strength of the model?"
#~ msgstr ""
#~ "Improve strength\n"
#~ "Did you know that you can use more wall loops and higher sparse infill "
#~ "density to improve the strength of the model?"
#~ msgid "Movement:"
#~ msgstr "Movement:"
@ -13601,9 +13553,6 @@ msgstr ""
#~ msgstr ""
#~ "Please heat the nozzle to above 170 degrees before loading filament."
#~ msgid "Newer 3mf version"
#~ msgstr "Newer 3mf version"
#, c-format
#~ msgid "Density of internal sparse infill, 100% means solid throughout"
#~ msgstr ""
@ -13641,25 +13590,6 @@ msgstr ""
#~ msgid "Export all objects as STL"
#~ msgstr "Export All Objects as STL"
#, c-format, boost-format
#~ msgid ""
#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
#~ "unrecognized:"
#~ msgstr ""
#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
#~ "unrecognized:"
#~ msgid "You'd better upgrade your software.\n"
#~ msgstr "You should update your software.\n"
#, c-format, boost-format
#~ msgid ""
#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
#~ "your software."
#~ msgstr ""
#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
#~ "your software."
#~ msgid "The 3mf is not compatible, load geometry data only!"
#~ msgstr "The 3mf is not compatible, loading geometry data only!"