fix 1.7dev Language de ru es (#2000)

This commit is contained in:
Heiko Liebscher 2023-09-05 14:03:10 +02:00 committed by GitHub
parent 6f3045b3e5
commit a361daeb3a
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
22 changed files with 5032 additions and 1743 deletions

View file

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-08-31 21:45+0800\n"
"POT-Creation-Date: 2023-09-04 11:33+0200\n"
"PO-Revision-Date: 2023-04-01 13:21+0800\n"
"Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
"Language-Team: \n"
@ -5383,8 +5383,8 @@ msgstr ""
msgid ""
"When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add Primitive"
"\"->\"Timelapse Wipe Tower\"."
"by right-click the empty position of build plate and choose \"Add "
"Primitive\"->\"Timelapse Wipe Tower\"."
msgstr ""
"在录制无工具头延时摄影视频时,建议添加“延时摄影擦料塔”\n"
"右键单击打印板的空白位置,选择“添加标准模型”->“延时摄影擦料塔”。"
@ -6582,6 +6582,21 @@ msgid ""
"The prime tower requires that support has the same layer height with object."
msgstr "擦拭塔要求支撑和对象采用同样的层高。"
msgid ""
"Organic support tree tip diameter must not be smaller than support material "
"extrusion width."
msgstr ""
msgid ""
"Organic support branch diameter must not be smaller than 2x support material "
"extrusion width."
msgstr ""
msgid ""
"Organic support branch diameter must not be smaller than support tree tip "
"diameter."
msgstr ""
msgid ""
"Support enforcers are used but support is not enabled. Please enable support."
msgstr "使用了支撑添加器但没有打开支撑。请打开支撑。"
@ -7716,10 +7731,10 @@ msgstr "满速风扇在"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
"\"close_fan_the_first_x_layers\" to maximum at layer "
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇"
"第一层”,则“全风扇速度第一层”将被忽略,在这种情况下,风扇将在“禁用风扇第一"
@ -8816,6 +8831,9 @@ msgstr "粗壮树"
msgid "Tree Hybrid"
msgstr "混合树"
msgid "Organic"
msgstr ""
msgid "Independent support layer height"
msgstr "支撑独立层高"
@ -8846,6 +8864,16 @@ msgstr ""
"此设置确定了允许树状支撑的最大悬垂角度。如果角度增加,可以更水平地打印分支,"
"使它们可以到达更远的地方。"
msgid "Preferred Branch Angle"
msgstr ""
#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""
msgid "Tree support branch distance"
msgstr "树状支撑分支距离"
@ -8853,6 +8881,18 @@ msgid ""
"This setting determines the distance between neighboring tree support nodes."
msgstr "此设置确定了树状支撑的相邻节点之间的距离。"
msgid "Branch Density"
msgstr ""
#. TRN PrintSettings: "Organic supports" > "Branch Density"
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs but the supports "
"are harder to remove, thus it is recommended to enable top support "
"interfaces instead of a high branch density value if dense interfaces are "
"needed."
msgstr ""
msgid "Adaptive layer height"
msgstr "自适应层高"
@ -8875,12 +8915,41 @@ msgstr "树状支撑裙边宽度"
msgid "Distance from tree branch to the outermost brim line"
msgstr "从树状支撑分支到最外层裙边线的距离"
msgid "Tip Diameter"
msgstr ""
#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
msgid "Branch tip diameter for organic supports."
msgstr ""
msgid "Tree support branch diameter"
msgstr "树状支撑分支直径"
msgid "This setting determines the initial diameter of support nodes."
msgstr "此设置确定了树状支撑节点的初始直径。"
#. TRN PrintSettings: #lmFIXME
msgid "Branch Diameter Angle"
msgstr ""
#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the organic "
"support."
msgstr ""
msgid "Branch Diameter with double walls"
msgstr ""
#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
msgid ""
"Branches with area larger than the area of a circle of this diameter will be "
"printed with double walls for stability. Set this value to zero for no "
"double walls."
msgstr ""
msgid "Tree support wall loops"
msgstr "树状支撑外墙层数"
@ -9162,6 +9231,15 @@ msgstr ""
"薄壁特征的最小厚度。比这个数值还薄的特征将不被打印,而比最小特征厚度还厚的特"
"征将被加宽到墙最小宽度。参数值表示为相对喷嘴直径的百分比"
msgid "First layer minimum wall width"
msgstr ""
msgid ""
"The minimum wall width that should be used for the first layer is "
"recommended to be set to the same size as the nozzle. This adjustment is "
"expected to enhance adhesion."
msgstr ""
msgid "Minimum wall width"
msgstr "墙最小线宽"
@ -14711,8 +14789,8 @@ msgstr ""
#~ msgstr "正在准备设置页"
#~ msgid ""
#~ "You have the following presets with saved options for \"Print Host upload"
#~ "\""
#~ "You have the following presets with saved options for \"Print Host "
#~ "upload\""
#~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
#~ msgid ""