Merged with master

xs/src/libslic3r/PrintConfig.cpp

@@ -504,19 +504,38 @@ PrintConfigDef::PrintConfigDef()
     def = this->add("filament_cooling_initial_speed", coFloats);
     def->label = L("Speed of the first cooling move");
     def->tooltip = L("Cooling moves are gradually accelerating beginning at this speed. ");
-    def->cli = "filament-cooling-initial-speed=i@";
+    def->cli = "filament-cooling-initial-speed=f@";
     def->sidetext = L("mm/s");
     def->min = 0;
     def->default_value = new ConfigOptionFloats { 2.2f };
 
+    def = this->add("filament_minimal_purge_on_wipe_tower", coFloats);
+    def->label = L("Minimal purge on wipe tower");
+    def->tooltip = L("After a tool change, the exact position of the newly loaded filament inside "
+                     "the nozzle may not be known, and the filament pressure is likely not yet stable. "
+                     "Before purging the print head into an infill or a sacrificial object, Slic3r will always prime "
+                     "this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably.");
+    def->cli = "filament-minimal-purge-on-wipe-tower=f@";
+    def->sidetext = L("mm³");
+    def->min = 0;
+    def->default_value = new ConfigOptionFloats { 15.f };
+
     def = this->add("filament_cooling_final_speed", coFloats);
     def->label = L("Speed of the last cooling move");
     def->tooltip = L("Cooling moves are gradually accelerating towards this speed. ");
-    def->cli = "filament-cooling-final-speed=i@";
+    def->cli = "filament-cooling-final-speed=f@";
     def->sidetext = L("mm/s");
     def->min = 0;
     def->default_value = new ConfigOptionFloats { 3.4f };
 
+    def = this->add("filament_load_time", coFloats);
+    def->label = L("Filament load time");
+    def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator.");
+    def->cli = "filament-load-time=i@";
+    def->sidetext = L("s");
+    def->min = 0;
+    def->default_value = new ConfigOptionFloats { 0.0f };
+
     def = this->add("filament_ramming_parameters", coStrings);
     def->label = L("Ramming parameters");
     def->tooltip = L("This string is edited by RammingDialog and contains ramming specific parameters ");
@@ -524,6 +543,14 @@ PrintConfigDef::PrintConfigDef()
     def->default_value = new ConfigOptionStrings { "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|"
 	   " 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" };
 
+    def = this->add("filament_unload_time", coFloats);
+    def->label = L("Filament unload time");
+    def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator.");
+    def->cli = "filament-unload-time=i@";
+    def->sidetext = L("s");
+    def->min = 0;
+    def->default_value = new ConfigOptionFloats { 0.0f };
+
     def = this->add("filament_diameter", coFloats);
     def->label = L("Diameter");
     def->tooltip = L("Enter your filament diameter here. Good precision is required, so use a caliper "
@@ -545,10 +572,7 @@ PrintConfigDef::PrintConfigDef()
 
     def = this->add("filament_type", coStrings);
     def->label = L("Filament type");
-    def->tooltip = L("If you want to process the output G-code through custom scripts, just list their "
-                   "absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed "
-                   "the absolute path to the G-code file as the first argument, and they can access "
-                   "the Slic3r config settings by reading environment variables.");
+    def->tooltip = L("The filament material type for use in custom G-codes.");
     def->cli = "filament_type=s@";
     def->gui_type = "f_enum_open";
     def->gui_flags = "show_value";
@@ -892,8 +916,16 @@ PrintConfigDef::PrintConfigDef()
     def->min = 0;
     def->default_value = new ConfigOptionFloat(0.3);
 
+    def = this->add("remaining_times", coBool);
+    def->label = L("Supports remaining times");
+    def->tooltip = L("Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute"
+                     " intervals into the G-code to let the firmware show accurate remaining time."
+                     " As of now only the Prusa i3 MK3 firmware recognizes M73."
+                     " Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode.");
+    def->default_value = new ConfigOptionBool(false);
+
 	def = this->add("silent_mode", coBool);
-	def->label = L("Support silent mode");
+	def->label = L("Supports silent mode");
 	def->tooltip = L("Set silent mode for the G-code flavor");
 	def->default_value = new ConfigOptionBool(true);
 
@@ -1623,6 +1655,12 @@ PrintConfigDef::PrintConfigDef()
     def->cli = "single-extruder-multi-material!";
 	def->default_value = new ConfigOptionBool(false);
 
+    def = this->add("single_extruder_multi_material_priming", coBool);
+    def->label = L("Prime all printing extruders");
+    def->tooltip = L("If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print.");
+    def->cli = "single-extruder-multi-material-priming!";
+    def->default_value = new ConfigOptionBool(true);
+
     def = this->add("support_material", coBool);
     def->label = L("Generate support material");
     def->category = L("Support material");
@@ -1993,8 +2031,8 @@ PrintConfigDef::PrintConfigDef()
 
     def = this->add("wipe_into_infill", coBool);
     def->category = L("Extruders");
-    def->label = L("Purging into infill");
-    def->tooltip = L("Wiping after toolchange will be preferentially done inside infills. "
+    def->label = L("Purge into this object's infill");
+    def->tooltip = L("Purging after toolchange will done inside this object's infills. "
                      "This lowers the amount of waste but may result in longer print time "
                      " due to additional travel moves.");
     def->cli = "wipe-into-infill!";
@@ -2002,8 +2040,8 @@ PrintConfigDef::PrintConfigDef()
 
     def = this->add("wipe_into_objects", coBool);
     def->category = L("Extruders");
-    def->label = L("Purging into objects");
-    def->tooltip = L("Objects will be used to wipe the nozzle after a toolchange to save material "
+    def->label = L("Purge into this object");
+    def->tooltip = L("Object will be used to purge the nozzle after a toolchange to save material "
                      "that would otherwise end up in the wipe tower and decrease print time. "
                      "Colours of the objects will be mixed as a result.");
     def->cli = "wipe-into-objects!";