diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index e819724fb3..6fad3d486c 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -459,6 +459,23 @@ msgstr ""
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr ""
 
+msgid "Some presets are modified."
+msgstr ""
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr ""
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1236,6 +1253,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr ""
 
@@ -1260,6 +1280,9 @@ msgstr ""
 msgid "Confirm"
 msgstr ""
 
+msgid "Close"
+msgstr ""
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1303,9 +1326,6 @@ msgstr ""
 msgid "File"
 msgstr ""
 
-msgid "Close"
-msgstr ""
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1639,9 +1659,6 @@ msgstr ""
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2089,9 +2106,6 @@ msgstr ""
 msgid "Start a new project"
 msgstr ""
 
-msgid "Open Project"
-msgstr ""
-
 msgid "Open a project file"
 msgstr ""
 
@@ -2569,6 +2583,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 
@@ -2762,17 +2785,9 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr ""
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-
 msgid "Creating a new project"
 msgstr ""
 
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 6dc2001df5..8c151f37c1 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -476,6 +476,25 @@ msgstr "Wählen sie eine oder mer Dateien (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Wählen sie eine Datei (gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Einige Voreinstellungen wurden geändert."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"Sie können die geänderten Voreinstellungen in das neue Projekt übernehmen, "
+"verwerfen oder als neue Voreinstellungen speichern."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Projekt öffnen"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1300,6 +1319,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1326,6 +1348,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Bestätigen"
 
+msgid "Close"
+msgstr "Schließen"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1381,9 +1406,6 @@ msgstr ""
 msgid "File"
 msgstr "Datei"
 
-msgid "Close"
-msgstr "Schließen"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1793,9 +1815,6 @@ msgstr "Update fehlgeschlagen."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2252,9 +2271,6 @@ msgstr "Neues Projekt"
 msgid "Start a new project"
 msgstr "Ein neues Projekt beginnen"
 
-msgid "Open Project"
-msgstr "Projekt öffnen"
-
 msgid "Open a project file"
 msgstr "Öffne eine Projektdatei"
 
@@ -2736,6 +2752,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Untere"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 "Wechseln Sie in den objektbezogenen Einstellungsmodus, um die "
@@ -2940,21 +2965,11 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr "Einige Voreinstellungen wurden geändert."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 "Sie können die geänderten Voreinstellungen in das neue Projekt übernehmen "
 "oder sie verwerfen"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"Sie können die geänderten Voreinstellungen in das neue Projekt übernehmen, "
-"verwerfen oder als neue Voreinstellungen speichern."
-
 msgid "Creating a new project"
 msgstr "Neues Projekt erstellen"
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 78ac2555ba..f9bc763f5d 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -468,6 +468,25 @@ msgstr "Choose one or more files (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Choose one file (.gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Some presets are modified."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"You can keep the modified presets for the new project, discard, or save "
+"changes as new presets."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Open Project"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1274,6 +1293,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1300,6 +1322,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Confirm"
 
+msgid "Close"
+msgstr "Close"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1355,9 +1380,6 @@ msgstr ""
 msgid "File"
 msgstr "File"
 
-msgid "Close"
-msgstr "Close"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1753,9 +1775,6 @@ msgstr "Update failed."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2211,9 +2230,6 @@ msgstr "New Project"
 msgid "Start a new project"
 msgstr "Start a new project"
 
-msgid "Open Project"
-msgstr "Open Project"
-
 msgid "Open a project file"
 msgstr "Open a project file"
 
@@ -2695,6 +2711,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Bottom"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr "Switch to per-object setting mode to edit modifier settings."
 
@@ -2894,19 +2919,9 @@ msgstr ""
 "Preview only mode:\n"
 "The loaded file contains G-code only and can not enter the Prepare page"
 
-msgid "Some presets are modified."
-msgstr "Some presets are modified."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr "You can keep the modified presets for the new project or discard them"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"You can keep the modified presets for the new project, discard, or save "
-"changes as new presets."
-
 msgid "Creating a new project"
 msgstr "Creating a new project"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 8fb1ee8682..3dbc00ef3e 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -478,6 +478,25 @@ msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Elija un archivo (gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Algunos preajustes se modifican."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"Puede mantener los preajustes de los campos de trabajo en el nuevo proyecto, "
+"descartar o guardar los cambios como nuevos preajustes."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Proyesto Abierto"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1295,6 +1314,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1321,6 +1343,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Confirmar"
 
+msgid "Close"
+msgstr "Cerrar"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1376,9 +1401,6 @@ msgstr ""
 msgid "File"
 msgstr "Archivo"
 
-msgid "Close"
-msgstr "Cerrar"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1785,9 +1807,6 @@ msgstr "Actualización fallida."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2243,9 +2262,6 @@ msgstr "Nuevo proyecto"
 msgid "Start a new project"
 msgstr "Empezar un nuevo proyecto"
 
-msgid "Open Project"
-msgstr "Proyesto Abierto"
-
 msgid "Open a project file"
 msgstr "Abrir un archivo de proyecto"
 
@@ -2729,6 +2745,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Inferior"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 "Cambia al modo de ajuste por objeto para editar los ajustes de los "
@@ -2934,21 +2959,11 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr "Algunos preajustes se modifican."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 "Puedes mantener los preajustes modificados en el nuevo proyecto o "
 "descartarlos"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"Puede mantener los preajustes de los campos de trabajo en el nuevo proyecto, "
-"descartar o guardar los cambios como nuevos preajustes."
-
 msgid "Creating a new project"
 msgstr "Creando un nuevo proyecto"
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index f98ad0ed73..4bace56449 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -479,6 +479,25 @@ msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/obj/amf) :"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Choisissez un fichier (gcode/.gco/.g/.ngc/ngc) :"
 
+msgid "Some presets are modified."
+msgstr "Certains préréglages sont modifiés."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"Vous pouvez conserver les préréglages modifiés dans le nouveau projet, "
+"annuler ou enregistrer les modifications en tant que nouveaux préréglages."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Projet ouvert"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1295,6 +1314,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1321,6 +1343,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Confirmer"
 
+msgid "Close"
+msgstr "Fermer"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1376,9 +1401,6 @@ msgstr ""
 msgid "File"
 msgstr "Dossier"
 
-msgid "Close"
-msgstr "Fermer"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1769,9 +1791,6 @@ msgstr "Mise à jour a échoué."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2225,9 +2244,6 @@ msgstr "Nouveau Projet"
 msgid "Start a new project"
 msgstr "Démarrer un nouveau projet"
 
-msgid "Open Project"
-msgstr "Projet ouvert"
-
 msgid "Open a project file"
 msgstr "Ouvrir un fichier de projet"
 
@@ -2708,6 +2724,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Du bas"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 "Basculez vers le mode de réglage par objet pour modifier les paramètres du "
@@ -2913,21 +2938,11 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr "Certains préréglages sont modifiés."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 "Vous pouvez conserver les préréglages modifiés dans le nouveau projet ou les "
 "supprimer"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"Vous pouvez conserver les préréglages modifiés dans le nouveau projet, "
-"annuler ou enregistrer les modifications en tant que nouveaux préréglages."
-
 msgid "Creating a new project"
 msgstr "Création d'un nouveau projet"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index fc3653caa0..827575b89c 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: 2022-07-27 22:05+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -483,6 +483,23 @@ msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Válassz ki egy fájlt (gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Néhány beállítás megváltozott."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Projekt megnyitása"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1313,6 +1330,9 @@ msgstr ""
 "őket egyenként felsorolni, ezért a megfelelő helyeken a kód kommentekben "
 "vannak feltüntetve."
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Szín"
 
@@ -1340,6 +1360,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Megerősítés"
 
+msgid "Close"
+msgstr "Bezárás"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1395,9 +1418,6 @@ msgstr ""
 msgid "File"
 msgstr "Fájl"
 
-msgid "Close"
-msgstr "Bezárás"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1779,9 +1799,6 @@ msgstr "A frissítés sikertelen."
 msgid "Failed to start printing job"
 msgstr "Nem sikerült elindítani a nyomtatási feladatot"
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2233,9 +2250,6 @@ msgstr "Új projekt"
 msgid "Start a new project"
 msgstr "Új projekt indítása"
 
-msgid "Open Project"
-msgstr "Projekt megnyitása"
-
 msgid "Open a project file"
 msgstr "Projektfájl megnyitása"
 
@@ -2718,6 +2732,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Alsó"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 
@@ -2914,17 +2937,9 @@ msgstr ""
 "A betöltött fájl csak G-kódot tartalmaz, nem lehet továbblépni az "
 "Előkészítés fülre"
 
-msgid "Some presets are modified."
-msgstr "Néhány beállítás megváltozott."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-
 msgid "Creating a new project"
 msgstr "Új projekt létrehozása"
 
diff --git a/bbl/i18n/list.txt b/bbl/i18n/list.txt
index f82656dd84..fa5f356a2f 100644
--- a/bbl/i18n/list.txt
+++ b/bbl/i18n/list.txt
@@ -63,6 +63,7 @@ src/slic3r/GUI/NotificationManager.cpp
 src/slic3r/GUI/ObjectDataViewModel.cpp
 src/slic3r/GUI/OpenGLManager.cpp
 src/slic3r/GUI/OptionsGroup.cpp
+src/slic3r/GUI/PrintOptionsDialog.cpp
 src/slic3r/GUI/ParamsPanel.cpp
 src/slic3r/GUI/PartPlate.cpp
 src/slic3r/GUI/Plater.cpp
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index d8e6baf4c7..e6a55bf550 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -473,6 +473,25 @@ msgstr "Kies een of meer bestanden (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Kies een bestand (.gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Sommige voorinstellingen zijn aangepast."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project ze "
+"laten vervallen of opslaan als nieuwe voorinstelling."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Open Project"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1302,6 +1321,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1328,6 +1350,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Bevestigen"
 
+msgid "Close"
+msgstr "Sluiten"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1383,9 +1408,6 @@ msgstr ""
 msgid "File"
 msgstr "Bestand"
 
-msgid "Close"
-msgstr "Sluiten"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1788,9 +1810,6 @@ msgstr "Updaten mislukt."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2246,9 +2265,6 @@ msgstr "Nieuw project"
 msgid "Start a new project"
 msgstr "Start een nieuw project"
 
-msgid "Open Project"
-msgstr "Open Project"
-
 msgid "Open a project file"
 msgstr "Op een project bestand"
 
@@ -2740,6 +2756,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Onderste"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr ""
 "Schakel over naar instellingsmodus per object om instellingen van de "
@@ -2946,21 +2971,11 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr "Sommige voorinstellingen zijn aangepast."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 "Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project of ze "
 "laten vervallen"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project ze "
-"laten vervallen of opslaan als nieuwe voorinstelling."
-
 msgid "Creating a new project"
 msgstr "Start een nieuw project"
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index b9a3134d17..1189cf2d78 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -469,6 +469,25 @@ msgstr "Välj en eller flera filer (3mf/step/stl/obj/amf):"
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Välj en fil (.gcode/.gco/.g/.ngc/ngc):"
 
+msgid "Some presets are modified."
+msgstr "Några inställningar har ändrats."
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr ""
+"Fortsätt med redigerings inställningarna till nytt projekt, avfärda dem "
+"eller spara som ny inställning."
+
+msgid "User logged out"
+msgstr ""
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr ""
+
+msgid "Open Project"
+msgstr "Öppna Projekt"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1281,6 +1300,9 @@ msgid ""
 "the corresponding code comments."
 msgstr ""
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "Colour"
 
@@ -1307,6 +1329,9 @@ msgstr "SN"
 msgid "Confirm"
 msgstr "Acceptera"
 
+msgid "Close"
+msgstr "Stäng"
+
 msgid "AMS Slots"
 msgstr ""
 
@@ -1362,9 +1387,6 @@ msgstr ""
 msgid "File"
 msgstr "Fil"
 
-msgid "Close"
-msgstr "Stäng"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1758,9 +1780,6 @@ msgstr "Uppdatering misslyckades."
 msgid "Failed to start printing job"
 msgstr ""
 
-msgid "default value"
-msgstr ""
-
 msgid "parameter name"
 msgstr ""
 
@@ -2216,9 +2235,6 @@ msgstr "Nytt Pojekt"
 msgid "Start a new project"
 msgstr "Skapa nytt projekt"
 
-msgid "Open Project"
-msgstr "Öppna Projekt"
-
 msgid "Open a project file"
 msgstr "Öppna en projekt fil"
 
@@ -2699,6 +2715,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "Bottenlager"
 
+msgid "Spaghetti Detection"
+msgstr ""
+
+msgid "Stop printing when spaghetti detected"
+msgstr ""
+
+msgid "First Layer Inspection"
+msgstr ""
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr "Ändra till per objekt inställningsläge till redigerings inställningar."
 
@@ -2897,20 +2922,10 @@ msgid ""
 "The loaded file contains gcode only, Can not enter the Prepare page"
 msgstr ""
 
-msgid "Some presets are modified."
-msgstr "Några inställningar har ändrats."
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr ""
 "Fortsätt med redigerings inställningarna till nytt projekt eller avfärda dem"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr ""
-"Fortsätt med redigerings inställningarna till nytt projekt, avfärda dem "
-"eller spara som ny inställning."
-
 msgid "Creating a new project"
 msgstr "Skapar nytt projekt"
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index 9df03b5da2..3b79b2be40 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 11:33+0800\n"
-"PO-Revision-Date: 2022-08-04 11:34+0800\n"
+"POT-Creation-Date: 2022-08-05 12:00+0800\n"
+"PO-Revision-Date: 2022-08-05 12:05+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
 "Language: zh_CN\n"
@@ -406,7 +406,7 @@ msgid "Downloading Bambu Network Plug-in"
 msgstr "正在下载Bambu网络插件"
 
 msgid "Incorrect password"
-msgstr ""
+msgstr "访问码不正确"
 
 #, c-format, boost-format
 msgid "Connect %s failed! [SN:%s, code=%s]"
@@ -464,6 +464,23 @@ msgstr "选择一个或多个文件（3mf/step/stl/obj/amf）："
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "选择一个文件（gcode/.gco/.g/.ngc/ngc）："
 
+msgid "Some presets are modified."
+msgstr "预设已被修改。"
+
+msgid ""
+"You can keep the modifield presets to the new project, discard or save "
+"changes as new presets."
+msgstr "您可以保留未保存修改的预设应用到新项目中，或者选择忽略。"
+
+msgid "User logged out"
+msgstr "用户登出"
+
+msgid "new or open project file is not allowed during the slicing process!"
+msgstr "在切片过程不允许新建或打开项目文件！"
+
+msgid "Open Project"
+msgstr "打开项目"
+
 msgid ""
 "The version of Bambu studio is too low and needs to be updated to the latest "
 "version before it can be used normally"
@@ -1053,7 +1070,7 @@ msgid ""
 msgstr "自动摆放失败，处理对象几何数据时遇到异常。"
 
 msgid "Arranging"
-msgstr ""
+msgstr "自动摆盘中"
 
 msgid "Arranging canceled."
 msgstr "已取消自动摆放。"
@@ -1250,6 +1267,9 @@ msgstr ""
 "软件中的很多部分都来自于社区贡献,因此，我们无法逐一列出他们，相反的，他们将被"
 "注释于相应的代码中。"
 
+msgid "AMSMaterialsSetting"
+msgstr ""
+
 msgid "Colour"
 msgstr "颜色"
 
@@ -1274,6 +1294,9 @@ msgstr ""
 msgid "Confirm"
 msgstr "确定"
 
+msgid "Close"
+msgstr "关闭"
+
 msgid "AMS Slots"
 msgstr "AMS舱内材料"
 
@@ -1325,9 +1348,6 @@ msgstr "AMS不会在启动时自动读取耗材丝信息。它会使用上次关
 msgid "File"
 msgstr "文件"
 
-msgid "Close"
-msgstr "关闭"
-
 msgid ""
 "A error occurred. Maybe memory of system is not enough or it's a bug of the "
 "program"
@@ -1702,9 +1722,6 @@ msgstr "更新失败。"
 msgid "Failed to start printing job"
 msgstr "发起打印任务失败"
 
-msgid "default value"
-msgstr "默认值"
-
 msgid "parameter name"
 msgstr "参数名称"
 
@@ -2162,9 +2179,6 @@ msgstr "新建项目"
 msgid "Start a new project"
 msgstr "新建一个项目"
 
-msgid "Open Project"
-msgstr "打开项目"
-
 msgid "Open a project file"
 msgstr "打开项目文件"
 
@@ -2645,6 +2659,15 @@ msgctxt "Layers"
 msgid "Bottom"
 msgstr "底部"
 
+msgid "Spaghetti Detection"
+msgstr "炒面检测"
+
+msgid "Stop printing when spaghetti detected"
+msgstr "当发生炒面时停止打印"
+
+msgid "First Layer Inspection"
+msgstr "首层扫描"
+
 msgid "Switch to per-object setting mode to edit modifier settings."
 msgstr "切换到对象模式以编辑修改器的设置。"
 
@@ -2842,17 +2865,9 @@ msgstr ""
 "仅预览模式：\n"
 "被加载的文件仅包含G-Code，不支持进入准备页面"
 
-msgid "Some presets are modified."
-msgstr "预设已被修改。"
-
 msgid "You can keep the modified presets to the new project or discard them"
 msgstr "您可以保留修改的预设到新项目中或者忽略这些修改"
 
-msgid ""
-"You can keep the modifield presets to the new project, discard or save "
-"changes as new presets."
-msgstr "您可以保留未保存修改的预设应用到新项目中，或者选择忽略。"
-
 msgid "Creating a new project"
 msgstr "创建新项目"
 
@@ -6119,6 +6134,9 @@ msgstr "支撑：正在修补层%d的空洞"
 msgid "Support: propagate branches at layer %d"
 msgstr "支撑：正在生长层%d的树枝"
 
+#~ msgid "default value"
+#~ msgstr "默认值"
+
 #~ msgid "Auto arrange"
 #~ msgstr "自动摆盘"
 
@@ -6404,9 +6422,6 @@ msgstr "支撑：正在生长层%d的树枝"
 #~ msgid "Vibration Calibration"
 #~ msgstr "振动校准"
 
-#~ msgid "First Layer Inspection"
-#~ msgstr "首层扫描"
-
 #~ msgid "Please select a printer first."
 #~ msgstr "请先选择一台打印机。"
 
diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp
index 57723062ae..984cadd333 100644
--- a/src/slic3r/GUI/DeviceManager.cpp
+++ b/src/slic3r/GUI/DeviceManager.cpp
@@ -2834,6 +2834,7 @@ void DeviceManager::clean_user_info()
     BOOST_LOG_TRIVIAL(trace) << "DeviceManager::clean_user_info";
     // reset selected_machine
     selected_machine = "";
+    local_selected_machine = "";
 
     // clean access code
     for (auto it = userMachineList.begin(); it != userMachineList.end(); it++) {
diff --git a/src/slic3r/GUI/Jobs/PrintJob.cpp b/src/slic3r/GUI/Jobs/PrintJob.cpp
index 7c3229fa21..db760503ad 100644
--- a/src/slic3r/GUI/Jobs/PrintJob.cpp
+++ b/src/slic3r/GUI/Jobs/PrintJob.cpp
@@ -101,10 +101,10 @@ void PrintJob::process()
     int curr_percent = 10;
 
     if (this->connection_type == "lan") {
-        msg = sending_over_lan_str;
+        msg = _L("Sending print job over LAN");
     }
     else {
-        msg = sending_over_cloud_str;
+        msg = _L("Sending print job through cloud service");
     }
 
     int result = -1;
diff --git a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
index 2b3dcc1751..52ba95e306 100644
--- a/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
+++ b/src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
@@ -84,7 +84,7 @@ void UpgradeNetworkJob::process()
     }
 
     if (result < 0) {
-        update_status(curr_percent, _L("Download failed"));
+        update_status(0, _L("Download failed"));
         wxCommandEvent event(EVT_UPGRADE_NETWORK_FAILED);
         event.SetEventObject(m_event_handle);
         wxPostEvent(m_event_handle, event);
@@ -108,7 +108,7 @@ void UpgradeNetworkJob::process()
     }
 
     if (result != 0) {
-        update_status(curr_percent, _L("Install failed"));
+        update_status(0, _L("Install failed"));
         wxCommandEvent event(EVT_UPGRADE_NETWORK_FAILED);
         event.SetEventObject(m_event_handle);
         wxPostEvent(m_event_handle, event);
diff --git a/src/slic3r/GUI/PrintOptionsDialog.cpp b/src/slic3r/GUI/PrintOptionsDialog.cpp
index eef87fa18e..5ec6963c3b 100644
--- a/src/slic3r/GUI/PrintOptionsDialog.cpp
+++ b/src/slic3r/GUI/PrintOptionsDialog.cpp
@@ -88,7 +88,7 @@ wxBoxSizer* PrintOptionsDialog::create_settings_group(wxWindow* parent)
     auto sizer = new wxBoxSizer(wxVERTICAL);
     auto line_sizer = new wxBoxSizer(wxHORIZONTAL);
     m_cb_spaghetti = new CheckBox(parent);
-    auto text_spaghetti = new wxStaticText(parent, wxID_ANY, _L("spaghetti Detection"));
+    auto text_spaghetti = new wxStaticText(parent, wxID_ANY, _L("Spaghetti Detection"));
     text_spaghetti->SetFont(Label::Body_14);
     line_sizer->Add(FromDIP(5), 0, 0, 0);
     line_sizer->Add(m_cb_spaghetti, 0, wxALL | wxALIGN_CENTER_VERTICAL, FromDIP(5));