FIX: Some translation issues

Change-Id: I7afe6624a565fe34991bee4c0b914ed05507e39a

bbl/i18n/sv/BambuStudio_sv.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-05-22 15:23+0800\n"
+"POT-Creation-Date: 2023-05-25 12:20+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -3122,6 +3122,9 @@ msgstr "Visa Konfigurations Mapp"
 msgid "Show Tip of the Day"
 msgstr "Visa dagens tips"
 
+msgid "Report issue"
+msgstr ""
+
 msgid "Check for Update"
 msgstr "Sök efter Uppdatering"
 
@@ -4446,6 +4449,11 @@ msgstr ""
 "Filen %s har skickats till skrivarens lagringsutrymme och kan visas på "
 "skrivaren."
 
+msgid ""
+"Unable to perform boolean operation on model meshes. Only positive parts "
+"will be exported."
+msgstr ""
+
 msgid ""
 "Print By Object: \n"
 "Suggest to use auto-arrange to avoid collisions when printing."
@@ -8966,7 +8974,22 @@ msgstr ""
 msgid "Canceled"
 msgstr ""
 
-#: resources/data/hints.ini: [hint:3D Scene Operations]
+msgid "load_obj: failed to parse"
+msgstr ""
+
+msgid "The file contains polygons with more than 4 vertices."
+msgstr ""
+
+msgid "The file contains polygons with less than 2 vertices."
+msgstr ""
+
+msgid "The file contains invalid vertex index."
+msgstr ""
+
+msgid "This OBJ file couldn't be read because it's empty."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
 "Did you know how to control view and object/part selection with mouse and "
@@ -8976,7 +8999,7 @@ msgstr ""
 "Vet du hur du kontrollerar vy och objekt/delval med mus och pekskärm i 3D-"
 "scenen?"
 
-#: resources/data/hints.ini: [hint:Cut Tool]
+#: resources/data/hints.ini: [hint:Cut Tool]
 msgid ""
 "Cut Tool\n"
 "Did you know that you can cut a model at any angle and position with the "
@@ -8986,7 +9009,7 @@ msgstr ""
 "Visste du att du kan klippa en modell i valfri vinkel och position med "
 "skärverktyget?"
 
-#: resources/data/hints.ini: [hint:Fix Model]
+#: resources/data/hints.ini: [hint:Fix Model]
 msgid ""
 "Fix Model\n"
 "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing "
@@ -8996,7 +9019,7 @@ msgstr ""
 "Visste du att du kan fixa en skadad 3D-modell för att undvika många "
 "berednings problem?"
 
-#: resources/data/hints.ini: [hint:Timelapse]
+#: resources/data/hints.ini: [hint:Timelapse]
 msgid ""
 "Timelapse\n"
 "Did you know that you can generate a timelapse video during each print?"
@@ -9004,7 +9027,7 @@ msgstr ""
 "Timelapse\n"
 "Visste du att du kan generera en timelapse video under varje utskrift?"
 
-#: resources/data/hints.ini: [hint:Auto-Arrange]
+#: resources/data/hints.ini: [hint:Auto-Arrange]
 msgid ""
 "Auto-Arrange\n"
 "Did you know that you can auto-arrange all objects in your project?"
@@ -9012,7 +9035,7 @@ msgstr ""
 "Placera Automatiskt\n"
 "Visste du att du automatiskt kan ordna alla objekt i ditt projekt?"
 
-#: resources/data/hints.ini: [hint:Auto-Orient]
+#: resources/data/hints.ini: [hint:Auto-Orient]
 msgid ""
 "Auto-Orient\n"
 "Did you know that you can rotate objects to an optimal orientation for "
@@ -9022,7 +9045,7 @@ msgstr ""
 "Visste du att du kan rotera objekt till en optimal orientering för utskrift "
 "med ett enkelt klick?"
 
-#: resources/data/hints.ini: [hint:Lay on Face]
+#: resources/data/hints.ini: [hint:Lay on Face]
 msgid ""
 "Lay on Face\n"
 "Did you know that you can quickly orient a model so that one of its faces "
@@ -9034,7 +9057,7 @@ msgstr ""
 "placeras på byggytan? Välj funktionen ”Placera på yta” eller tryck på <b>F</"
 "b> tangenten."
 
-#: resources/data/hints.ini: [hint:Object List]
+#: resources/data/hints.ini: [hint:Object List]
 msgid ""
 "Object List\n"
 "Did you know that you can view all objects/parts in a list and change "
@@ -9044,7 +9067,7 @@ msgstr ""
 "Visste du att du kan visa alla objekt/delar i en lista och ändra "
 "inställningar för varje objekt/del?"
 
-#: resources/data/hints.ini: [hint:Simplify Model]
+#: resources/data/hints.ini: [hint:Simplify Model]
 msgid ""
 "Simplify Model\n"
 "Did you know that you can reduce the number of triangles in a mesh using the "
@@ -9056,7 +9079,7 @@ msgstr ""
 "funktionen Förenkla mesh? Högerklicka på modellen och välj Förenkla "
 "modellen. Läs mer i dokumentationen."
 
-#: resources/data/hints.ini: [hint:Slicing Parameter Table]
+#: resources/data/hints.ini: [hint:Slicing Parameter Table]
 msgid ""
 "Slicing Parameter Table\n"
 "Did you know that you can view all objects/parts on a table and change "
@@ -9066,7 +9089,7 @@ msgstr ""
 "Visste du att du kan visa alla objekt/delar på ett bord och ändra "
 "inställningar för varje objekt/del?"
 
-#: resources/data/hints.ini: [hint:Split to Objects/Parts]
+#: resources/data/hints.ini: [hint:Split to Objects/Parts]
 msgid ""
 "Split to Objects/Parts\n"
 "Did you know that you can split a big object into small ones for easy "
@@ -9076,7 +9099,7 @@ msgstr ""
 "Visste du att du kan dela upp ett stort objekt i små objekt för att "
 "underlätta färgning eller utskrift?"
 
-#: resources/data/hints.ini: [hint:Subtract a Part]
+#: resources/data/hints.ini: [hint:Subtract a Part]
 msgid ""
 "Subtract a Part\n"
 "Did you know that you can subtract one mesh from another using the Negative "
@@ -9088,7 +9111,7 @@ msgstr ""
 "modifikationen Negativ del? På så sätt kan du till exempel skapa lätt "
 "justerbara hål direkt i Bambu Studio. Läs mer i dokumentationen."
 
-#: resources/data/hints.ini: [hint:STEP]
+#: resources/data/hints.ini: [hint:STEP]
 msgid ""
 "STEP\n"
 "Did you know that you can improve your print quality by slicing a STEP file "
@@ -9102,7 +9125,7 @@ msgstr ""
 "Bambu Studio stöder beredningen av STEP-filer, vilket ger jämnare resultat "
 "än en STL-fil med lägre upplösning. Prova det!"
 
-#: resources/data/hints.ini: [hint:Z seam location]
+#: resources/data/hints.ini: [hint:Z seam location]
 msgid ""
 "Z seam location\n"
 "Did you know that you can customize the location of the Z seam, and even "
@@ -9114,7 +9137,7 @@ msgstr ""
 "den på din utskrift för att få den på en mindre synlig plats? Detta "
 "förbättrar modellens övergripande utseende. Kolla in det!"
 
-#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
+#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
 msgid ""
 "Fine-tuning for flow rate\n"
 "Did you know that flow rate can be fine-tuned for even better-looking "
@@ -9126,7 +9149,7 @@ msgstr ""
 "utskrifter? Beroende på materialet kan du förbättra den totala finishen på "
 "den tryckta modellen genom att göra lite finjusteringar."
 
-#: resources/data/hints.ini: [hint:Split your prints into plates]
+#: resources/data/hints.ini: [hint:Split your prints into plates]
 msgid ""
 "Split your prints into plates\n"
 "Did you know that you can split a model that has a lot of parts into "
@@ -9139,7 +9162,7 @@ msgstr ""
 "alla delar."
 
 #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer
-#: Height]
+#: Height]
 msgid ""
 "Speed up your print with Adaptive Layer Height\n"
 "Did you know that you can print a model even faster, by using the Adaptive "
@@ -9149,7 +9172,7 @@ msgstr ""
 "Visste du att du kan skriva ut en modell ännu snabbare med alternativet "
 "Adaptiv Lager Höjd? Kolla in det!"
 
-#: resources/data/hints.ini: [hint:Support painting]
+#: resources/data/hints.ini: [hint:Support painting]
 msgid ""
 "Support painting\n"
 "Did you know that you can paint the location of your supports? This feature "
@@ -9161,7 +9184,7 @@ msgstr ""
 "enkelt att placera support material endast på de delar av modellen som "
 "faktiskt behöver det."
 
-#: resources/data/hints.ini: [hint:Different types of supports]
+#: resources/data/hints.ini: [hint:Different types of supports]
 msgid ""
 "Different types of supports\n"
 "Did you know that you can choose from multiple types of supports? Tree "
@@ -9173,7 +9196,7 @@ msgstr ""
 "fungerar bra för organiska modeller samtidigt som du sparar glödtråd och "
 "förbättrar utskriftshastigheten. Kolla in dem!"
 
-#: resources/data/hints.ini: [hint:Printing Silk Filament]
+#: resources/data/hints.ini: [hint:Printing Silk Filament]
 msgid ""
 "Printing Silk Filament\n"
 "Did you know that Silk filament needs special consideration to print it "
@@ -9185,7 +9208,7 @@ msgstr ""
 "lyckas? En högre temperatur och lägre hastighet rekommenderas alltid för "
 "bästa resultat."
 
-#: resources/data/hints.ini: [hint:Brim for better adhesion]
+#: resources/data/hints.ini: [hint:Brim for better adhesion]
 msgid ""
 "Brim for better adhesion\n"
 "Did you know that when printing models have a small contact interface with "
@@ -9195,7 +9218,7 @@ msgstr ""
 "Visste du att när printade modeller har ett litet kontakt område med "
 "byggplattan rekommenderas det att använda en Brim?"
 
-#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
+#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
 msgid ""
 "Set parameters for multiple objects\n"
 "Did you know that you can set slicing parameters for all selected objects at "
@@ -9205,7 +9228,7 @@ msgstr ""
 "Visste du att du kan ställa in berednings parametrar för alla valda objekt "
 "samtidigt?"
 
-#: resources/data/hints.ini: [hint:Stack objects]
+#: resources/data/hints.ini: [hint:Stack objects]
 msgid ""
 "Stack objects\n"
 "Did you know that you can stack objects as a whole one?"
@@ -9213,7 +9236,7 @@ msgstr ""
 "Stapla objekt\n"
 "Visste du att du kan stapla objekt som en hel?"
 
-#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
+#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
 "Did you know that you can save the wasted filament by flushing them into "
@@ -9223,7 +9246,7 @@ msgstr ""
 "Visste du att du kan minska filament åtgång genom att rensa den till support/"
 "objekt/ifyllning under filament byten?"
 
-#: resources/data/hints.ini: [hint:Improve strength]
+#: resources/data/hints.ini: [hint:Improve strength]
 msgid ""
 "Improve strength\n"
 "Did you know that you can use more wall loops and higher sparse infill "